Rozpocznij

Multi-timeframe

Multi-Timeframe PO3 HTF ICTThis indicator plots higher timeframe candles directly onto your current chart, giving you full HTF context without switching timeframes — built around ICT's Power of 3 concept. Features: 🕯 HTF Candle Overlay — up to 10 higher timeframe bars plotted directly on your chart, live and real-time 📊 Dual EMA (25 & 50) — plotted across the HTF overlay bars for instant trend bias at a glance 🟩 Fair Value Gaps — detects and highlights FVGs on both your current timeframe and the HTF overlay 📏 HTF Opening Price Line — marks the current HTF bar's open with a horizontal line for PO3 reference 🎨 Fully customisable — candle colours, wick width, bar width, spacing, offset and position all adjustable Who it's for: Traders using ICT concepts including Power of 3, Fair Value Gaps, and liquidity — anyone who needs to keep higher timeframe structure visible without leaving their entry timeframe. Compatible timeframes: Works on any chart timeframe as long as the HTF setting is higher than your current chart timeframe. MT5 version also available — link in the script settings.
Wskaźnik Pine Script®
od DarrenPallatina
Multi-Time Frame PO3 HTF ICTThis is the indicator running on a 15 minute chart with the HTF set to 4 hours. Instead of flipping up to the 4H to check structure, the overlay brings those 4H candles directly onto the 15M chart — you can see the full body and wicks of each 4H bar in real time as price develops, without ever leaving your entry timeframe. The current 4H bar updates live every tick, so you can watch the HTF candle form in real time — including whether it's respecting or breaking key levels as the 15M price action plays out beneath it. The blue horizontal line marks the 4H opening price — a key reference for ICT's Power of 3 concept, showing where the HTF bar opened so you can track whether price is in accumulation, manipulation or distribution relative to that level. The red and blue EMAs (25 and 50) run across the HTF bars giving you immediate trend bias on the 4H without needing a separate indicator or chart. Any Fair Value Gaps identified on the 4H are also highlighted directly on the overlay, so you can see where HTF draw is likely to be while trading your 15M entries. Everything you need to stay anchored to the higher timeframe — without leaving the lower one.
Wskaźnik Pine Script®
od DarrenPallatina
Viprasol Multi-Timeframe Trend Signal Engine## Overview The Multi-Timeframe Trend Signal Engine is a comprehensive trading system that combines SuperTrend-based signals with a 6-timeframe ADX trend dashboard, EMA trend ribbon, chaos trend line, order blocks, and risk management — all in one overlay. It scans 5m through Daily timeframes using ADX-based trend detection and calculates a confluence score (0-6) showing how many timeframes agree on direction. Built for traders who want multi-timeframe confirmation before entering trades. ## What Is Original (Viprasol Additions) The following features were designed and implemented by Viprasol and do not exist in the original script: 1. **MTF Confluence Score (0-6)** — Counts how many of the 6 monitored timeframes (5m, 15m, 1H, 4H, 12H, Daily) currently show a bullish ADX trend. Displayed in the dashboard as "X/6 Bullish" with color coding: green (5-6), yellow (3-4), red (0-2). A separate bear confluence count is also tracked. This gives traders an instant read on multi-timeframe alignment strength. 2. **Enhanced Dashboard Rows** — The original dashboard only showed 6 timeframe trend readings with volatility and RSI. Viprasol added three additional rows: (a) MTF Confluence Score alongside Ribbon trend status, (b) Last Signal direction (Buy/Sell) alongside Chaos Trend status (Bullish/Bearish), and (c) a branded footer row. The dashboard now shows 10 rows of information instead of 8. 3. **MTF Alignment Alerts** — Two new alert conditions that fire when 5 or more of the 6 timeframes agree on direction (Strong Bullish Alignment and Strong Bearish Alignment). These did not exist in the original and provide automated notification of high-confluence multi-timeframe setups. 4. **Ribbon Trend Change Alerts** — Two alert conditions for when the EMA ribbon crosses from bullish to bearish or vice versa. The original had trend change alerts but they were tied to the ribbon state variable directly — the Viprasol version uses edge detection (`ribbonBullish and not ribbonBullish `) for precise single-bar firing. 5. **Tooltips on All Inputs** — Every input parameter (25+) has a descriptive tooltip explaining its function, recommended values, and behavior. The original had tooltips on only 3 inputs (sensitivity, signal type, and EMA length). 6. **Reorganized Input Groups** — Inputs reorganized from 4 groups (Main, Trend, Advanced, Dashboard) into 5 semantically clearer groups (Main Settings, Trend Settings, Signal Settings, Dashboard Settings, Risk Management) with consistent naming and inline layouts. 7. **Viprasol Dashboard Styling** — Branded header ("Viprasol - MTF Trend Signal Engine"), dark theme color scheme (#111725 background, #18233a header), and branded footer with version number. ## How It Works **SuperTrend Signals:** A custom SuperTrend calculation generates buy/sell signals using ATR-based dynamic bands. All signals require bar-close confirmation to prevent repainting. Two modes are available: "All Signals" shows every crossover, while "Filtered Signals" adds an EMA filter requiring price to be above/below the main EMA for additional confirmation. **Multi-Timeframe ADX Dashboard:** The indicator fetches ADX trend quality from 6 timeframes (5m, 15m, 1H, 4H, 12H, Daily) using an anti-repaint security function (`src ` with `lookahead_on` — confirmed previous bar only). Each timeframe is classified as Bullish (ADX above adaptive threshold), Bearish (below threshold), or Neutral. The confluence score counts how many timeframes are bullish (0-6), providing an at-a-glance alignment reading. **Trend Ribbon:** Five EMAs (20, 25, 35, 45, 55) form a color-coded ribbon that shifts between bullish and bearish states on crossover. The ribbon provides visual trend context independent of the signal system. **EMA Cloud:** The 150/250 EMA cloud identifies longer-term structural trend direction. Green fill indicates bullish structure, red indicates bearish. **Chaos Trend Line:** An adaptive trend line using pivot-based detection with ATR channels. It tracks the trend using highest/lowest pivot levels and changes color on confirmed reversals. **Order Blocks:** Structural order blocks based on pivot break of structure. Bullish OBs form at swing lows when higher highs break structure; bearish OBs form at swing highs when lower lows break structure. Boxes fade when tested and are removed when fully invalidated. **RSI Take Profit System:** A sequential TP system using RSI crossovers at 70/85/100 (bullish) and 30/15/5 (bearish). Each TP level only fires after the previous one has triggered within the current signal, creating a staged exit approach. **Reversal Signals:** A 25-period RSI-based reversal detector that fires when RSI crosses above oversold (25) or below overbought (75) levels, using bar-close confirmation. ## Key Features - Custom SuperTrend signals with bar-close confirmation (no repainting on confirmed bars) - Two signal modes: All Signals and EMA-Filtered Signals - 6-timeframe ADX trend dashboard (5m, 15m, 1H, 4H, 12H, Daily) - MTF Confluence Score (0-6) — count of bullish timeframes - 5-EMA trend ribbon with color-coded direction - EMA 150/250 cloud for structural trend - Adaptive chaos trend line with pivot detection - Structural order blocks with auto-invalidation - RSI-based sequential take profit system (TP1/TP2/TP3) - Visual-only TP/SL risk management lines - RSI reversal signals at extreme levels - Channel breakout levels from pivot highs/lows - 3 candle coloring modes (Scalper RSI, Trend Ribbon, EMA Direction) - RSI background zones for overbought/oversold - Configurable dashboard position (3 locations) and font size (4 sizes) - All visual elements individually toggleable - 10 alert conditions with dynamic messages ## How to Use **Reading the Dashboard:** - Check the MTF Confluence Score first — 5-6/6 Bullish = strong alignment for longs, 0-1/6 = strong alignment for shorts - Individual timeframe trends show where agreement and disagreement exist - Ribbon and Chaos Trend rows provide additional trend context **Signal Interpretation:** - Use "Filtered Signals" mode for higher-quality entries aligned with the main EMA - Use "All Signals" mode for more frequent entries in ranging markets - Reversal signals (purple labels) indicate potential exhaustion at RSI extremes - TP1/TP2/TP3 markers provide staged exit targets based on RSI momentum **Recommended Settings:** - Scalping (1m-5m): Sensitivity 2.0, ATR Factor 8, Filtered mode - Intraday (15m-1H): Sensitivity 2.5, ATR Factor 11, All Signals mode - Swing (4H-1D): Sensitivity 3.0, ATR Factor 14, Filtered mode ## Settings | Group | Description | |---|---| | Main Settings | Sensitivity (signal frequency), Signal Mode (All/Filtered), ATR Factor (band width) | | Trend Settings | Toggle trend ribbon, EMA cloud, chaos trend line, order blocks, main EMA (with custom period) | | Signal Settings | Show/hide signals, candle coloring mode, RSI background zones, channel breakouts | | Dashboard Settings | Show/hide dashboard, position (3 options), font size (4 options) | | Risk Management | Visual-only TP/SL lines with adjustable TP strength, individual TP level toggles | ## Alerts 1. **Buy Signal** — SuperTrend crossover buy confirmed at bar close 2. **Sell Signal** — SuperTrend crossover sell confirmed at bar close 3. **Filtered Buy** — Buy signal with price above main EMA 4. **Filtered Sell** — Sell signal with price below main EMA 5. **Reversal Up** — RSI crosses above oversold level 6. **Reversal Down** — RSI crosses below overbought level 7. **Ribbon Turned Bullish** — EMA ribbon crosses to bullish state 8. **Ribbon Turned Bearish** — EMA ribbon crosses to bearish state 9. **Strong Bullish MTF Alignment** — 5+ of 6 timeframes showing bullish trend 10. **Strong Bearish MTF Alignment** — 5+ of 6 timeframes showing bearish trend All alerts include {{ticker}}, {{close}}, and {{interval}} for dynamic notification messages. ## Limitations & Disclaimer - MTF data uses the anti-repaint pattern (previous bar + lookahead) to avoid repainting on confirmed bars. However, the current bar's data updates in real-time until confirmed. - ADX trend classification uses an adaptive threshold (median ADX x multiplier), which means "Neutral" readings are relative to recent volatility, not fixed levels. - The RSI TP system is sequential — TP2 only fires after TP1, and TP3 after TP2. If TP1 never triggers, later levels will not fire. - Order blocks are based on a simplified break-of-structure method using 3-bar pivots. They are not equivalent to institutional order flow. - The Risk Management TP/SL lines are VISUAL ONLY — they do not execute trades. - Candle coloring modes use different data sources — ensure you understand which mode is active. - This indicator is for educational and analytical purposes only — it is not financial advice. Always use proper risk management and test on a demo account first. ## Credits & Attribution The original script provides the SuperTrend signal engine, EMA trend ribbon, EMA cloud, chaos trend line, MTF ADX dashboard (6 timeframes), order block detection, RSI take profit system, risk management TP/SL lines, reversal signals, channel breakouts, candle coloring modes, volatility measurement, and 8 alert conditions. All enhancements listed in the "What Is Original" section above were designed and implemented by Viprasol. Published open-source per TradingView's open-source reuse guidelines.
Wskaźnik Pine Script®
od viprasol
1
AVANTI MASTER PRO FINALAVANTI MASTER PRO FINAL – Smart Intraday Trend & Breakout System AVANTI MASTER PRO FINAL is an advanced intraday trading indicator designed to identify high-probability buy and sell opportunities using trend analysis, momentum confirmation, and breakout strength evaluation. The indicator combines multiple technical factors such as EMA trend structure, RSI momentum, ADX trend strength, buildup analysis, breakout scoring, and multi-timeframe trend confirmation to help traders avoid sideways markets and focus on strong trending moves. This system also automatically calculates Entry, Stop Loss, and multiple target levels (TP1, TP2, TP3) depending on the instrument being traded. 🔹 Key Features Trend Detection Uses EMA 9, EMA 30, and EMA 200 to identify market direction and trend structure. Multi-Timeframe Trend Filter Signals are confirmed only when 5-minute and 15-minute trends align, improving signal quality. Breakout Strength Score A scoring model evaluates multiple bullish and bearish conditions to determine breakout probability. RSI Momentum Confirmation Momentum validation using RSI levels to avoid weak signals. ADX Trend Strength Filter Signals are generated only when ADX indicates a trending market, helping to avoid sideways conditions. Buildup Analysis Identifies Long Buildup, Short Buildup, Short Covering, and Long Unwinding based on price and volume behavior. Signal Strength Dashboard Displays STRONG BUY, STRONG SELL, or WAIT signals based on combined market conditions. Auto Target System Automatically plots Entry, Stop Loss, and multiple target levels (TP1, TP2, TP3). 📊 Dashboard Information The built-in dashboard provides quick insight into market conditions including: • Trend Status • Market Buildup • RSI Momentum • Breakout / Breakdown Strength • ADX Trend Strength • Trade Zone • Signal Strength ⚙ Supported Instruments Targets are optimized for: • NIFTY • Stock Options • Crude Oil • Natural Gas ⚠ Disclaimer This indicator is created for educational and analytical purposes only. Always manage risk and use proper risk management before taking any trade. 👨‍💻 Developed By Developed by AVANTI STOCKS Satish D. Nakhate
Wskaźnik Pine Script®
od avantistocks
Multi-Time Frame PO3 HTF ICTMulti-Time Frame PO3 HTF ICT This indicator plots higher timeframe candles directly onto your current chart, giving you full HTF context without switching timeframes — built around ICT's Power of 3 concept. Features: 🕯 HTF Candle Overlay — up to 10 higher timeframe bars plotted directly on your chart, live and real-time 📊 Dual EMA (25 & 50) — plotted across the HTF overlay bars for instant trend bias at a glance 🟩 Fair Value Gaps — detects and highlights FVGs on both your current timeframe and the HTF overlay 📏 HTF Opening Price Line — marks the current HTF bar's open with a horizontal line for PO3 reference 🎨 Fully customisable — candle colours, wick width, bar width, spacing, offset and position all adjustable Who it's for: Traders using ICT concepts including Power of 3, Fair Value Gaps, and liquidity — anyone who needs to keep higher timeframe structure visible without leaving their entry timeframe. Compatible timeframes: Works on any chart timeframe as long as the HTF setting is higher than your current chart timeframe. MT5 version also available — link in the script settings.
Wskaźnik Pine Script®
od DarrenPallatina
AVANTI MASTER PRO FINALAVANTI MASTER PRO FINAL – Smart Intraday Trend & Breakout System AVANTI MASTER PRO FINAL is an advanced intraday trading indicator designed to identify high-probability buy and sell opportunities using a combination of trend analysis, momentum strength, breakout scoring, and smart money behavior. This indicator integrates multiple technical factors such as EMA trend structure, RSI momentum, breakout strength analysis, buildup detection, ADX trend strength filter, and multi-timeframe confirmation to help traders avoid sideways markets and focus on strong trending moves. The system automatically generates entry signals and calculates risk-reward targets for different instruments. Key Features Trend Detection Uses EMA 9, EMA 30, and EMA 200 to determine the overall market trend. Multi-Timeframe Trend Filter Signals are confirmed only when 5-minute and 15-minute trends align, improving trade accuracy. Breakout Strength Score A scoring system evaluates multiple bullish and bearish conditions to determine breakout probability. RSI Momentum Confirmation RSI is used to validate market momentum before generating signals. ADX Trend Strength Filter Signals are generated only when ADX > 23, helping to avoid sideways markets. Buildup Analysis Detects Long Buildup, Short Buildup, Short Covering, and Long Unwinding based on price and volume behavior. Auto Target System Automatically calculates Entry, TP1, TP2, TP3, and Stop Loss depending on the instrument. Supported Instruments Targets are optimized for: • NIFTY • Stock Options • Crude Oil • Natural Gas Dashboard Information The built-in dashboard displays key market insights such as: • Trend status • RSI momentum • Breakout / Breakdown strength • ADX trend strength • Market buildup • Trade zone indication Best Use This indicator is designed for intraday trading and trend continuation setups where strong momentum and trend confirmation are present. Works best in trending markets. Developed by AVANTI STOCKS – Satish D. Nakhate
Wskaźnik Pine Script®
od avantistocks
ICT Power of 3 with Multi Bar and HTF EMA Display : PO3MyFXRoom HTF Bar Rejection — Higher Timeframe Overlay Indicator This indicator plots higher timeframe candles directly onto your current chart, so you can analyse HTF price action and structure without switching between timeframes. What it does: Instead of flipping between charts, you get up to 15 candles from your chosen higher timeframe (H1, H4, Daily, Weekly or any other) displayed as a clean overlay on the right side of your chart. Each candle shows the full body and wicks, colour-coded to match bullish and bearish price action. Features: HTF Candle Overlay — displays up to 15 higher timeframe bars directly on your chart Fair Value Gaps — detects and highlights FVGs on both the current timeframe and the HTF overlay, so you can see where price may draw to HTF Opening Price Line — marks the current HTF bar's opening price with a horizontal line for quick reference Liquidity Grabs & Failed Breaks — automatically identifies when price grabs a high or low and fails to close beyond it, marking potential reversal points Dual EMA (25 & 50) — plots both EMAs across the HTF overlay bars so you can gauge trend direction on the higher timeframe at a glance EMA Trend Filter — long signals only when the 25 EMA is above the 50, short signals only when below Fully customisable — colours, line styles, candle width, and positioning all adjustable Who it's for: Traders who use multi-timeframe analysis and want to keep their higher timeframe context visible at all times — particularly useful for ICT-based concepts including Power of 3, Fair Value Gaps, and liquidity.
Wskaźnik Pine Script®
od DarrenPallatina
MTF Key Levels: Previous Day/Week/Month/Year + Opens Multi-Timeframe Key Levels (Auto-Updating) This indicator plots important previous session and higher-timeframe levels that many traders watch for support, resistance, liquidity, and reaction points. All levels automatically update when a new period begins, so your chart always shows the most recent relevant levels without clutter. Levels Included Daily • Daily Open • Previous Day Open • Previous Day High • Previous Day Low • Previous Day Equilibrium (midpoint of high/low) Weekly • Week Open • Previous Week Open • Previous Week High • Previous Week Low • Previous Week Equilibrium Weekend • Previous Weekend High • Previous Weekend Low (Useful for crypto traders where weekend volatility often creates liquidity zones.) Higher Timeframes • Previous Month High • Previous Month Low • Previous Year High • Previous Year Low Features • Auto-updating levels – old levels are replaced as new sessions begin • Multi-timeframe context – see key daily, weekly, monthly, and yearly levels at once • Clean chart design – only the most recent levels are shown • Dashed level styling for clarity • Color-coded tags for quick identification • Automatic high-contrast label text for readability • Adjustable label distance so tags don’t overlap price How Traders Use These Levels These levels often act as: • Liquidity zones • Support / resistance • Mean reversion targets • Reaction areas for intraday trades • Bias confirmation when price reclaims or rejects key levels Many strategies incorporate previous highs/lows, opens, and equilibrium levels when analyzing market structure and momentum. Notes • Levels are based on your chart timeframe and timezone settings. • Works on any intraday timeframe. • Particularly useful for crypto and futures markets where higher-timeframe levels are frequently respected.
Wskaźnik Pine Script®
od trader435543
Inverse Golden Pocket MTF ZonesIGP Multi-TF Zones — Inverse Golden Pocket Mapper Overview IGP Multi-TF Zones identifies dynamic support and resistance by detecting when price inverts through a Fibonacci golden pocket (the 0.618–0.786 zone) on any timeframe. When price breaks through a golden pocket from one side, that zone flips from resistance to support (or vice versa), creating a high-probability area for re-entry on a retest. The indicator overlays golden pocket zones from up to four timeframes simultaneously — your chart timeframe plus three configurable higher timeframes — so you can spot multi-timeframe confluence at a glance. Each zone tracks its lifecycle from formation through inversion or invalidation, with full visual feedback at every stage. How it works: Detects swing high → swing low pairs using pivot-based logic Draws the golden pocket zone (0.618–0.786 retracement) between the swings Monitors for inversion — a candle closing through the 0.786 level, confirming the zone has flipped Inverted zones change color (green for long, red for short) and become active areas to watch for retests Zones that get broken the wrong way (price closes beyond the swing origin) are invalidated and removed This is not a signal generator — it's a zone mapper. It shows you where the important levels are across multiple timeframes and lets you apply your own entry logic. Settings Reference Timeframe Combo Preset — Quick selection for which timeframes to display: Chart Only: Only your chart's own timeframe zones Chart + 15m: Chart TF plus 15-minute zones Chart + 15m + 30m: Three-tier view (default) Chart + 15m + 30m + 1h: Full four-tier stack Custom: Manually select each HTF and toggle independently Chart TF Show Chart TF Zones — Master toggle for your chart's native timeframe zones. Turn off if you only want higher TF zones overlaid. Extend Right (bars) — How many bars ahead the zone box extends past the current bar. Default: 15. Label Position — Where the zone info label sits relative to the box: Top-Left, Top-Right, Bot-Left, or Bot-Right. Use different positions per TF to prevent overlap. HTF 1 / HTF 2 / HTF 3 Each higher timeframe has its own self-contained settings group: Timeframe — Which timeframe to pull swing data from (e.g., 15m, 30m, 1h, 4h, D). Enabled — Toggle this HTF on/off. Min Swing (pts) — Minimum size in points for a swing to qualify. Higher timeframes naturally produce larger swings, so set this proportionally. Defaults: HTF1 = 45, HTF2 = 80, HTF3 = 145. Extend Right (bars) — Independent extend per TF. Higher TF zones represent bigger structures, so longer extensions make sense. Defaults: HTF1 = 30, HTF2 = 50, HTF3 = 80. Freeze Inverted — When on, inverted zones stop extending after a set number of bars, freezing them in place on the chart. Freeze After (bars) — How many bars after inversion before the zone freezes. Label Position — Top-Left, Top-Right, Bot-Left, or Bot-Right. Set different TFs to different corners to avoid label stacking. Swing Detection Pivot Lookback — Number of bars on each side to confirm a swing high/low. Higher values = fewer, more significant swings. Default: 5. Min Swing (pts) — Chart TF — Minimum point range between swing high and swing low for chart timeframe zones. Filters out insignificant micro-swings. Default: 25. Fibonacci Entry Level — Which fib level defines the entry edge of the golden pocket box. Options: 0.618 (default), 0.705, 0.786. The box always draws from your chosen entry level to 0.786. Show Entry Lines — Dashed line at the entry fib level (the bottom/top edge of the GP zone). Show CE Line — Consequent Encroachment line at the midpoint of the golden pocket (halfway between entry level and 0.786). CE is a key reaction level within the zone. Turns green/red on inversion. Show 0.786 Line (uninverted) — Dotted line at the inversion trigger level. Visible only on potential (uninverted) zones — once the zone inverts, this line disappears since it has served its purpose. Show 0.886 Line (uninverted) — Dotted line at the deep retracement level. Shows the extreme edge of the golden pocket. Also disappears on inversion. Direction Long Setups (Bearish GP) — Show zones where a bearish swing (high → low) creates a golden pocket that could invert into long support. Short Setups (Bullish GP) — Show zones where a bullish swing (low → high) creates a golden pocket that could invert into short resistance. IDs & Swing Labels Show Zone IDs — Each zone gets a unique sequential ID (Z1, Z2, Z3...) shown on the zone label. Show Swing IDs — Labels at each swing high (H) and swing low (L) that formed a zone, tagged with the zone ID and timeframe. Example: "Z42 5m H". Only swings that generated a zone are labeled. When multiple zones share the same swing point, labels merge with a "/" separator (e.g., "Z42 5m H / Z43 15m H"). Show Swing Lines — Dotted horizontal lines extending from each swing high and swing low to the right edge of the zone box. Lines turn solid on inversion. Swing ID Size — Text size for swing labels: tiny, small, or normal. Swing High ID Color — Color for swing high labels and lines. Default: orange. Swing Low ID Color — Color for swing low labels and lines. Default: blue. Zone ID Size — Text size for the zone ID portion of labels. Zone Lifecycle Delete Invalidated Zones — When on, zones that get broken (price closes beyond the swing origin) are immediately removed from the chart. When off, they stay visible with gray dotted borders. Max Zones Per TF — Maximum number of zones to keep per timeframe. When exceeded, the oldest zone is removed. Default: 6. Max: 50. Invalidation Invalidate on Swing Break — When price closes below the swing low (for long zones) or above the swing high (for short zones), the zone is marked as invalidated. Turn off to keep all zones alive indefinitely. Visuals Show Zone Labels — Master toggle for all zone info labels. Zone Label Size — Text size for zone labels: tiny, small, or normal. Zone Label Content Fine-grained control over what information appears in each zone's label. Every field can be toggled independently: Zone ID (Z123) — The sequential zone identifier. Default: ON. Timeframe + Direction — Shows the source timeframe and direction arrow, e.g., "5m GP↑" or "15m IGP↓". Default: ON. Swing Size (42pt) — The point range of the swing that formed the zone. Default: ON. Swing Refs — Shows which swing high and low IDs created the zone, e.g., " ". Default: OFF. Swing Time — Timestamp (ET) of when the swing that formed the zone was detected. Default: ON. Inversion Time — Timestamp (ET) of when the zone inverted. Only appears on inverted zones. Default: ON. CE Value — The Consequent Encroachment price level. Default: ON. TF Colors Chart TF — Color for chart timeframe zones. Default: purple. HTF 1 — Color for the first higher timeframe. Default: blue. HTF 2 — Color for the second higher timeframe. Default: orange. HTF 3 — Color for the third higher timeframe. Default: teal. CE Line — Color for the Consequent Encroachment line. Default: white. Inverted Long — Color for zones that have inverted bullish (long). Default: green. Inverted Short — Color for zones that have inverted bearish (short). Default: red. Zone States Potential (colored by TF) — A golden pocket has formed but price hasn't broken through the 0.786 level yet. The zone extends to the right each bar. This is a zone to watch. Inverted (green or red) — Price closed through the 0.786 level, confirming the golden pocket has flipped. The zone is now an active support/resistance area for retests. The CE line and swing lines turn solid. The 0.786 and 0.886 helper lines disappear. Invalidated (gray/deleted) — Price closed beyond the swing origin, breaking the zone. Depending on settings, the zone is either deleted or shown as a gray dotted outline. Multi-Timeframe Confluence The real power is in stacking timeframes. When a 5m zone overlaps with a 15m and 30m zone at the same price level, that's multi-timeframe confluence — a much higher probability reaction area than any single-TF zone alone. Higher timeframe zones draw with thicker borders and more opacity so they stand out visually. Color-coding by timeframe lets you instantly see which TFs are aligned. Tips Start with Chart + 15m + 30m preset and adjust from there Set different label positions per TF (e.g., chart = Top-Left, HTF1 = Top-Right) to avoid clutter Higher TFs need larger min swing values to filter noise — the defaults are tuned for NQ but adjust for your instrument Use Freeze Inverted on lower TFs to keep the chart clean, turn it off on higher TFs so they keep extending The CE line is often the first reaction level within a zone — watch for wicks to CE When swing labels show merged IDs (Z42/Z43), that swing point is extra significant — multiple timeframes agree on it Built for NQ futures. Works on any instrument — adjust min swing sizes to match your market's typical range.
Wskaźnik Pine Script®
od timkamazik
AG Pro Auto Trendlines (MTF) - Break/Retest - Community - OSAG Pro Auto Trendlines (MTF) - Break/Retest (Community Edition • Open-Source) OVERVIEW AG Pro Auto Trendlines (MTF) is a rules-based market structure tool that automatically detects pivot-driven diagonal structure and renders trendlines across multiple timeframes. The primary goal is to standardize how trendline structure is identified, maintained, and interpreted—especially when you work with multi-indicator charts and need clean, consistent visuals. This script is designed for traders who prefer a systematic approach to structure: identify meaningful swing points, connect them with repeatable rules, and track “break” and “retest” events with optional confirmations. It is not an all-in-one strategy and it does not attempt to predict markets. Instead, it provides a structured lens for trendline-based analysis in a way that reduces subjectivity and chart clutter. COMMUNITY EDITION NOTE This is a Community Edition release. The emphasis is on transparency, study, and repeatability. You can review the logic, learn from it, and adapt it to your own workflow within TradingView’s community standards. WHAT THIS SCRIPT DOES (IN PRACTICAL TERMS) Detects swing pivots and classifies structure by strength and recency. Builds diagonal trendlines using deterministic rules. Supports multi-timeframe (MTF) structure contexts so you can compare “local” and “higher” trendlines. Tracks break events and (optionally) retest conditions. Provides clean, minimal labels intended to remain readable without dominating the chart. Offers profiles and density controls to balance information vs. simplicity. UNIQUE EDGE (WHY IT’S NOT “JUST ANOTHER TRENDLINE TOOL”) Many trendline indicators either (1) draw too many lines, (2) require heavy manual tuning, or (3) repaint aggressively with ambiguous rules. This script focuses on: Rule clarity: trendlines are produced from well-defined pivots and consistent selection rules. Structure separation: “micro / meso / mega” concept via profiles so you can choose a structural horizon. Stability controls: optional “Locked” behavior that prioritizes interpretability over constant redraw. Break/Retest as an interpretation layer: the script doesn’t only draw lines—it helps you observe when structure is challenged and whether price returns to test it. DESIGN PHILOSOPHY The chart must remain readable. Lines must be explainable: if a line exists, the user should be able to infer “why.” Signals should be optional and conservative (confirmation matters). Defaults should be sensible for most liquid markets; advanced controls are available for edge cases. METHODOLOGY (HIGH-LEVEL) The indicator follows a simple pipeline: A) Pivot Detection Swing points are derived from price action using a fixed pivot logic (left/right strength). Pivots are filtered and ranked to avoid noise dominance. The objective is to anchor trendlines to “structure-worthy” turning points, not every minor wiggle. B) Trendline Construction Trendlines are formed by connecting eligible pivots under deterministic constraints. Candidate lines are evaluated for relevance (recency / quality / interaction). Line selection prefers clarity and avoids overpopulating the chart. C) Multi-Timeframe Context (MTF) The script can incorporate higher timeframe pivots/structure to contextualize local moves. This is useful when lower timeframe price action is reacting to higher timeframe diagonals. D) Break / Retest Interpretation Layer A “break” is detected when price meaningfully violates a trendline under the chosen confirmation rule. A “retest” is detected when price returns to the broken/active structure zone under a defined proximity logic. Retest logic is optional and can be configured for conservative behavior. SIGNALS & EVENTS (WHAT THE LABELS MEAN) This tool is primarily visual, but it can optionally expose events as alerts depending on your configuration. Common event types: Active Structure: * A trendline currently considered valid/active according to the selection and stability rules. Break: * Price crosses the trendline in a direction that violates the prior structural role. * Important: break significance depends on your confirmation setting (see below). Retest (Optional): * After a break, price revisits the trendline zone. * Retest is often a “context event,” not a guaranteed entry. Many retests fail or overshoot. CONFIRMATION MODES (WHY “CLOSE” VS. INTRABAR MATTERS) A frequent source of confusion is whether a break should trigger on: Intrabar touch/cross (more responsive, but noisier), or Bar close confirmation (slower, but usually cleaner). If you enable Close confirmation: Break labels/events wait for the candle to close beyond the line (reduces whipsaws). Retest logic typically becomes more meaningful because the break is “confirmed” by closing data. If you use intrabar logic: You will see earlier breaks, but expect more false positives in choppy regimes. PROFILES (MICRO / MESO / MEGA) Profiles are intended as “structural horizon presets.” Exact behavior depends on the internal pivot strengths and selection constraints, but conceptually: Micro: short-horizon structure, more reactive, suitable for active monitoring. Meso: balanced structure, typically a good default for swing structure. Mega: longer-horizon structure, fewer but more dominant lines. If you feel “too many lines,” reduce density or move up the horizon (Micro → Meso → Mega). If you feel “not enough information,” increase density or move down the horizon (Mega → Meso → Micro). DENSITY / CLEANLINESS CONTROLS The indicator includes controls intended to keep the chart usable: Density (Balanced / Cleaner / Fuller): adjusts how aggressively lines are filtered. Replace vs. Keep behavior: controls whether new lines replace old ones as structure evolves. Locked mode: prioritizes stability and reduces frequent redraw behavior. A practical approach: Start with Balanced density and Locked mode. If you want more responsiveness, reduce locking or increase density gradually. If you want a presentation-quality chart, prioritize locking and cleaner density. HOW TO USE (WORKFLOWS) Workflow 1 — “Structure First, Indicators Second” Apply the script with defaults. Identify dominant diagonals (especially higher timeframe context). Add your favorite momentum/volume tool only after structure is clear. Use breaks/retests as context to interpret indicator signals (not as stand-alone triggers). Workflow 2 — “MTF Bias + Execution Timeframe” Use a higher timeframe (e.g., 4H / 1D) context in the script. Execute on a lower timeframe (e.g., 15m / 1H) while respecting higher timeframe diagonals. A lower timeframe signal against a higher timeframe trendline is not “wrong,” but it is higher risk. Workflow 3 — “Break-Then-Retest Observation” Focus on clean breaks using Close confirmation. Observe whether price returns to retest the level. Track the retest outcome to understand regime shifts (trend continuation vs. transition). IMPORTANT NOTES ABOUT INTERPRETATION Trendlines are not magic levels. They are a structured representation of diagonal support/resistance. In ranging markets, trendline breaks occur frequently and are less informative. In trending markets, diagonal structure is often respected, but overshoots and volatility spikes happen. Retests are context events. A retest can fail, succeed, or become a consolidation zone. TRANSPARENCY & LIMITATIONS 1. Not a strategy / not a signal guarantee This script does not promise profitability and should not be interpreted as a predictive system. It provides structure visualization and optional event labeling. 2. MTF limitations MTF data is derived from higher timeframe aggregation. Depending on the symbol/session and chart conditions, the exact appearance can differ across timeframes. This is expected behavior in MTF analysis. 3. Pivot-based structure is inherently lagging Pivots require a certain number of bars to confirm. This is the trade-off for structure quality. Faster pivots increase noise; slower pivots increase lag. 4. Structural redraw behavior Even with stability controls, structure can evolve as new pivots form. “Locked” behavior helps, but no structure tool can freeze reality without losing relevance. 5. Alerts are context, not execution If you enable alerts, treat them as notifications to review context, not as automatic trade triggers. PERFORMANCE NOTES This script is designed with multi-indicator chart usability in mind: Visual output aims to be minimal and readable. Defaults are chosen to avoid excessive object spam. If you increase density and enable many features simultaneously, object counts and chart load can increase. Recommended: tune step-by-step and keep only what you actively use. FAQ Q: Why do I sometimes see fewer lines than expected? A: The selection filters prioritize “structure-worthy” lines. Increase density, reduce locking, or use a more reactive profile. Q: Why did a line change? A: A new pivot can shift the best-fit structural representation. Use Locked mode if you prefer stability. Q: Which timeframe should I use? A: Many users find 1H–4H best for structure clarity. If you scalp, use Micro profile with more conservative confirmation. Q: Can this replace horizontal support/resistance? A: No. Diagonal structure complements horizontal levels. Many meaningful areas are a confluence of both. RISK DISCLOSURE Trading involves risk. Past market behavior does not predict future results. Trendlines, breaks, and retests can fail, overshoot, or reverse abruptly—especially during high volatility, news events, low liquidity periods, and regime transitions. Always use risk management, position sizing discipline, and confirm structure with broader context. NOT FINANCIAL ADVICE This indicator is provided for educational and informational purposes only and does not constitute financial advice, investment advice, or a recommendation to buy or sell any instrument. CHANGELOG (SUMMARY) V7.x: Community Edition packaging, cleaner HUD, stability-focused defaults, and clearer break/retest presentation. Focus: readability, rule clarity, and low-clutter output for real-world charts.
Wskaźnik Pine Script®
od AGProLabs
5
Fair Value Range Breakout [by Oberlunar]Fair Value Range Breakout by Oberlunar is a community tool built around higher-timeframe structure and HTF imbalance zones. It reconstructs and draws up to three recent candles from a user-selected HTF and optionally displays their High, Low, Open, and Close levels with configurable styles and colours, keeping HTF candles and FVG ranges readable while working on lower timeframes. On each confirmed HTF candle close, the script scans the last three closed HTF candles to detect bullish and bearish Fair Value Gaps using either wicks or candle bodies as the reference. You can filter gaps by a minimum size in ticks, keep only the most recent zones, and extend zones to the right for ongoing interaction tracking. Set the HTF timeframe according to your horizon, such as Daily for swing context or H4-H2 for intraday structure, then enable the HTF candle overlay and choose which OHLC levels to show for each candle. In the HTF FVG settings, pick Wicks for zones that reflect extremes or Bodies for tighter zones, and increase the minimum gap in ticks if you want fewer, cleaner zones. If you use signals, choose “Close inside” for stricter interaction requirements or “Wick touch” for earlier detection, and apply a small exit buffer in ticks when noise is high. A practical workflow is using HTF=2H on a 5m or 15m chart, monitoring price interaction with an HTF FVG zone, and treating the plotted signal as confirmation of a zone exit rather than a standalone entry system. Attribution and derivative work notice is explicit and intentional. The HTF candle architecture component is a derivative work based on HTF Candle Architecture by BigBeluga, and the HTF FVG engine is a derivative work based on “Fair Value Gap MTF” by Oberlunar. The original references are provided above exactly and in the code as required. Enjoy Oberlunar 👁️★
Wskaźnik Pine Script®
od oberlunar_tr
EMA Cloud + AlertsMulti‑Time Frame EMA Cloud with Pre‑Defined Modes for Intraday, Daily, and Weekly Trading. This indicator provides a clean, non‑repainting EMA Cloud system with optimized presets for different trading styles and volatility regimes. Modes automatically adjust EMA lengths, label sizes, and visual behavior for each timeframe category. Modes Included: Weekly – Standard (8/21) Weekly – Noise Filter (10/22) Daily – Standard (8/21) Daily – Smooth Trend (10/20) Daily – MACD Style (12/26) Intraday – Momentum (5/13) Intraday – Smooth Momentum (9/27) Features: Non‑repainting crossover logic (optional “Wait for Close” mode) Adaptive label sizing based on mode (tiny → small → normal) EMA Cloud visualization with trend‑persistent coloring Trend change alerts (LONG / SHORT) Distance‑to‑EMA table for precision entries and risk management Optional higher‑timeframe EMA sourcing Ideal For: Intraday momentum trading Daily swing trading Weekly trend and regime filtering Multi‑timeframe alignment strategies
Wskaźnik Pine Script®
od followmytradingjournal
7M Multi-Factor Momentum ScoreboardThe 7M Scoreboard is more than just a collection of indicators; it is a Real-Time Scoring Engine designed for momentum traders and quant-focused analysts. While many scripts simply "mash up" indicators, the 7M Dashboard provides a weighted analytical framework that filters market noise into a single, actionable 7M Score. It evaluates seven distinct dimensions of market health: Price Action, Relative Volume (Time-specific and Daily), Capital Structure (Float), and Multi-timeframe Trend alignment (VWAP, VWMA, MACD). Make sure to enable Extended Trading Hours in the TradingView settings. What makes it original? The core innovation lies in the 7M Scoring & Alerting logic. Instead of a trader manually checking eight different parameters, the script performs a logical "Pass/Fail" assessment on every bar. Dynamic Time-Anchored Change: Unlike standard change percentages, this script allows you to anchor the "Starting Price" to the Pre-market (4:00 AM), Regular Open (9:30 AM), or Post-market (4:00 PM). Relative Volume (RVOL) at Time: It compares the current 5-minute volume not just to recent bars, but to the historical average for that specific time of day, filtering out the standard "lunchtime lull." Capital Structure Integration: It incorporates a "Float" filter, essential for identifying low-float momentum vs. heavy-cap institutional moves. How it works The script calculates a total score out of 9 points based on the following criteria: Momentum: Is price change > X percent from your chosen time anchor? Liquidity: Is the 5-minute volume > X million? Relative Strength: Is Daily RVOL and Time-specific RVOL > X? Trend Alignment: Is price above VWAP and the 20-period VWMA? Momentum Convergence: Is the MACD histogram positive? Volatility Health: Is RSI between 30 and 70 (avoiding extreme over-extension)? Step-by-Step Guide to Use Set your Market Type: Open the settings and choose your Price Change Anchor. Use Pre-Market if you trade the morning "Gap and Go." Use Regular Open if you are a day-trader focused on the 9:30 AM bell. Configure Thresholds: Set your Min % Move (e.g., 1.5%) and Min 5m Vol. Monitor the 7M Score: Look at the bottom row. Score < 5: High-risk, no clear momentum. Score 7+: High-probability "7M Pass" setup. Alerts (Great with TV's Watchlist Alerts) Right-click the chart and "Add Alert." Select the 7M Dashboard and choose the "🚀 7M PASS" condition to be notified the moment a ticker hits your momentum criteria. Recommended Settings for Different Assets Small-Cap Momentum Pre-Market - 4.0% (Change) - 500k (5m Vol) - 50M (Float) Mega-Cap / Tech Regular - 1.0% (Change) - 1.5M (5m Vol) - 30,000M (Float) Crypto Intraday Regular - 2.5% (Change) - 1M (5m Vol) - 10,000M (Foat) Technical Details Pine Script Version: v6 Visuals: Features a high-contrast UI with adaptive text sizing for the final 7M Score. Alerting: Includes an optimized alert() function for real-time momentum detection. Disclaimer The "7M Multi-Factor Momentum Scoreboard" is a technical analysis tool provided for educational and informational purposes only. Nothing contained in this script, its outputs, or the 7M Score constitutes financial, investment, or trading advice. Trading stocks, futures, and cryptocurrencies involves significant risk of loss and is not suitable for every investor. No Guarantees: Past performance as displayed by historical indicators is not indicative of future results. Model Limitations: The 7M Score is based on mathematical calculations of price and volume; it does not account for fundamental news, earnings surprises, or broader macroeconomic shifts. Personal Responsibility: You are solely responsible for your own trading decisions. Always perform your own due diligence and consult with a licensed financial advisor before putting capital at risk.
Wskaźnik Pine Script®
od meistermarco
Multi-Timeframe S&R V1The Multi-Timeframe S&R V1 is a clean and powerful technical indicator designed to visualize key Support and Resistance (S&R) levels from multiple timeframes directly on your chart. Instead of drawing lines manually, this tool automates the process by plotting critical levels from the previous day, week, and month. This indicator is ideal for traders focusing on Price Action, Market Structure (HH/HL), or Mean Reversion strategies. Key Features: Daily Levels (D): Displays yesterday's High and Low, along with the current Daily Open. Essential for intraday trading and identifying the daily bias. Weekly Levels (W): Plots the High and Low from the previous week. These often act as major psychological levels where significant price reactions occur. Monthly Levels (M): Shows the High and Low of the previous month for a macro perspective on the market. Dynamic Labels: Each level is clearly labeled on the right side of the chart (e.g., "D-high", "W-low", "M-high") for instant identification. Fully Customizable: Toggle the visibility of each timeframe (D, W, M) independently via the settings to keep your chart clean and focused. Visual Hierarchy: Lines are distinguished by varying thicknesses and colors, allowing you to assess the importance of a level at a single glance. How to Use: Support & Resistance: Use these lines as potential bounce or breakout zones. Trend Confirmation: Combine these levels with your own Market Structure analysis (Higher Highs / Higher Lows). Targeting: Utilize weekly or monthly extremes as Take Profit targets or Stop Loss reference points.
Wskaźnik Pine Script®
od SpankyFPV
Cycle & Flow Indicator - D_QuantCycle & Flow Architecture (CFA) | Multi-Factor Regime Analysis Overview The Cycle & Flow Architecture (CFA) is a trend-following visualization engine that utilizes a triple-confirmation "Voting Mechanism" to identify market regimes. Rather than relying on a single lagging indicator, the CFA aggregates Cyclical Momentum, Directional Bias, and Volume Flow from the Daily timeframe to provide a unified consensus signal on your current chart. The goal of this script is to filter market noise by requiring a quantitative agreement between three non-correlated mathematical models before a "Regime Change" is visualized. The Quantitative Logic The core of the CFA is its Aggregation Engine, which calculates a normalized Quant Score ranging from -1.0 to +1.0. The engine polls three distinct components: Schaff Trend Cycle (STC): This component identifies the cyclical nature of price. It applies a double-smoothed stochastic process to a MACD line. In this script, the STC contributes a bullish signal when the cycle is above 25 and a bearish signal when the cycle is below 75 and falling. Parabolic SAR (PSAR): Used as a rigid directional filter. It calculates the "Stop and Reverse" points, if the price is above the PSAR, it contributes a +1 to the consensus, if below, a -1. Ease of Movement (EOM): This is the volume-validation component. It analyzes the relationship between price change and volume. A positive EOM suggests price is moving up on light resistance (conviction), while negative EOM suggests easy downward movement. How it Works: The Voting Mechanism The script calculates these three values on the Daily (D) timeframe using request.security to ensure higher-timeframe confluence. Bullish Regime: Triggered when the average score exceeds the Bullish Threshold (Default: 0.2). Bearish Regime: Triggered when the average score falls below the Bearish Threshold (Default: -0.2). Neutral Regime: When the components disagree or the scores hover near zero, the engine renders a "Grey" noise state, signaling a high-probability "sit on hands" environment. How to Use The Ghost Cloud: The central Hull Moving Average (HMA 20) acts as the baseline. The "cloud" fills between this baseline and the price, colored by the current Score. Volatility Extensions: The script plots ATR-based bands (14-period) that only appear during confirmed regimes. In a Bullish regime, the upper band appears, in a Bearish regime, the lower. Trade Execution: Traders typically look for the "Bullish/Bearish Start" alerts to signal the beginning of a new regime and use the "Grey" neutral zones to tighten stop-losses or exit positions. Settings Thresholds: Increase the Bullish/Bearish thresholds (e.g., to 0.5) to require more stringent agreement between the STC, PSAR, and EOM. Timeframe Note: The calculations are hardcoded to the Daily timeframe to provide a "North Star" directional bias regardless of whether you are viewing the 15m or 4h chart. Disclaimer: This tool is for educational and analytical purposes only. Quantitative models represent mathematical probabilities, not guarantees. © D_QUANT
Wskaźnik Pine Script®
od D_QUANT
Smart Money Structure | GainzAlgo📊 OVERVIEW: ================ Smart Money Structure Analysis is a professional-grade market structure and order-flow system designed to identify institutional trading behavior through volatility-adaptive logic, multi-timeframe trend alignment, and volume-based confirmation. This indicator implements original mathematical models to detect Change of Character (CHoCH), Break of Structure (BOS), cumulative volume dynamics, and trend convergence across seven timeframes — delivering high-probability trade signals with significantly reduced noise. Unlike basic indicator combinations, this system functions as a unified trading framework, where volatility adaptation, structure analysis, and volume confirmation continuously reinforce each other to provide precise, context-aware signals. ⭐ WHY THIS SYSTEM IS UNIQUE AND WORTHY OF PUBLICATION: ===================================================== This is not a collection of common indicators placed together. Smart Money Structure Analysis represents a cohesive institutional methodology, engineered so that: - Volatility adjusts signal sensitivity in real time - Multi-timeframe trends define directional bias - Market structure determines timing - Volume confirms institutional participation - Advanced filters eliminate low-quality setups Each component is mathematically linked to the others, creating a workflow that cannot be replicated by stacking separate indicators. 🔗 SYNERGISTIC INTEGRATION – HOW THE SYSTEM WORKS TOGETHER: ========================================================== 🧠 1. CONTEXT-AWARE VOLATILITY ADAPTATION ATR-based volatility logic dynamically adjusts all momentum thresholds: - Higher volatility → stronger confirmation required - Lower volatility → sensitivity increases to capture valid moves This prevents over-signaling in choppy markets and under-signaling during expansion phases — a core flaw in static indicators. 📐 2. MULTI-TIMEFRAME TREND CONVERGENCE ENGINE Seven timeframes are analyzed simultaneously: 1M • 5M • 15M • 30M • 1H • 4H • 1D Each timeframe is scored using EMA + VWAP alignment, producing a composite Trend Strength Score from -100 to +100. The stronger the alignment across timeframes, the higher the probability of continuation — instantly visible through the real-time dashboard. 🏗️ 3. INSTITUTIONAL MARKET STRUCTURE (CHoCH & BOS) The system automatically identifies the two core smart money concepts: - CHoCH (Change of Character): Signals potential trend exhaustion or reversal zones - BOS (Break of Structure): Confirms trend continuation and institutional commitment Structure zones are visualized with persistent, color-coded levels and clouds, providing precise contextual timing rather than lagging signals. 📊 4. CUMULATIVE VOLUME DELTA (CVD) CONFIRMATION CVD tracks the cumulative difference between buying and selling pressure: - Rising CVD → accumulation - Falling CVD → distribution - Divergence vs price → early reversal warning Volume participation is categorized into Low / Medium / High, adding depth beyond simple volume bars. 🛡️ 5. SIX-LAYER PROFESSIONAL SIGNAL FILTERING Every signal must pass through up to six independent confirmation layers: 1. Volatility-adjusted momentum 2. Higher timeframe trend alignment 3. Lower timeframe conflict prevention 4. Institutional volume confirmation 5. Structural breakout validation 6. Repeated-signal restriction This dramatically reduces false positives while preserving only high-quality institutional setups. 🧮 DETAILED CORE SYSTEMS: ======================== 📏 ADAPTIVE MOMENTUM FORMULA - Momentum Threshold = Base × (1 + (ATR ÷ Price) × 2) - Pre-Momentum Factor = Base × (1 − (ATR ÷ Price) × 0.5) 📊 TREND STRENGTH CALCULATION - Trend Strength = (Sum of 7 timeframe scores ÷ 7) × 100 📦 CVD LOGIC - Close > Previous Close → Buy volume added - Close < Previous Close → Sell volume subtracted - Cumulative sum reveals institutional intent 🧠 STRUCTURE DETECTION - Pivot-based swing logic - Candle confirmation - Configurable lookback periods - Non-repainting visualization 🧩 ADVANCED ANALYSIS TOOLS: ========================== 🧲 LIQUIDITY ZONE DETECTION Identifies probable retail stop-loss clusters where institutions often initiate stop hunts before true directional moves. 📦 MARKET PROFILE & ORDER FLOW IMBALANCE Detects buy/sell dominance using volume ratios, highlighting accumulation and distribution zones before large price moves. 🔄 RSI DIVERGENCE SCANNER Identifies bullish and bearish divergences that frequently precede structure shifts and trend reversals. 🎨 VISUAL SYSTEM & DASHBOARD: ============================ 📊 SMART MONEY MATRIX - Composite trend strength - System confidence % - CVD value - Directional grid for all timeframes 📈 TREND PREDICTION MATRIX (Optional) Forecasts short-term directional bias using trend, momentum, and volatility data. 🏷️ SIGNAL LABELS - BUY / SELL → Fully confirmed entries - READY → Momentum building - BOS / CHoCH → Structure events - FLOW / LIQ / BULL / BEAR → Advanced confirmations ⚙️ CORE FEATURES: ================ 1. Multi-Timeframe Trend Convergence 2. Smart Money Structure Detection (CHoCH & BOS) 3. Adaptive Volatility-Based Momentum 4. Cumulative Volume Delta (CVD) 5. Six-Layer Signal Filtering 6. Liquidity Zone Detection 7. Order Flow & Market Profile Analysis 8. Divergence Scanner 9. Dynamic Trendlines 10. Institutional-Grade Dashboard 📘 WHO THIS INDICATOR IS FOR: ============================ - Scalpers: Noise-filtered precision on lower timeframes - Day Traders: High-probability continuation setups - Swing Traders: Multi-timeframe alignment & structure zones - Reversal Traders: Divergence + CHoCH confirmation ⚠️ IMPORTANT DISCLAIMER: ======================== This indicator is a technical analysis and educational tool only. It does not provide financial advice or trade recommendations. Trading involves substantial risk, and losses are a natural part of trading. Past performance does not guarantee future results. All trading decisions remain the sole responsibility of the user.
Wskaźnik Pine Script®
od GainzAlgo
191
Multi Asset & Multi Timeframe Trend DashboardOverview The Multi-Asset & Multi-Timeframe Trend Dashboard is a comprehensive visual data terminal designed to provide a bird's-eye view of market sentiment across five different assets and seven distinct timeframes simultaneously. By consolidating 10 core technical indicators into a single table, it eliminates the need for "chart hopping" and helps traders identify high-probability trend alignment. How It Works The dashboard evaluates each asset based on a Scoring System ($-10$ to $+10$). For every timeframe, the script analyzes the following 10 conditions: Trend: EMA 20 > EMA 50Macro Trend: EMA 50 > EMA 200 Position: Price > EMA 200 MACD: MACD Line > Signal Line MACD Momentum: MACD Histogram > 0 RSI Momentum: RSI(14) > RSI SMA(14) RSI Level: RSI(14) > 50 Stochastics: Stoch K > D CCI: Commodity Channel Index > 0 Awesome Oscillator: AO > 0 Visual Logic & Features Indicator Dots (■): Represent the 10 individual technical conditions. Green indicates a bullish state; Red indicates a bearish state. Trend Arrows (▲/▼): Displays the aggregate directional bias of a timeframe based on the sum of the 10 dots. Neutral State (✖): If indicators are split 50/50 (Score of 0), a grey cross is displayed to indicate total market indecision. "ALL" Column: A macro-summary that aggregates scores across all four primary timeframes. Volatility Marker (•): A dot appearing next to the symbol name indicates that current ATR is higher than the historical average (user-defined threshold). Market Status Color: The symbol name background turns Green if the market is currently open and active, and Red if it is closed or stagnant. Technical Implementation This script utilizes request.security calls to fetch data across timeframes. To ensure performance and prevent repainting issues, all security calls are handled using the barstate.islast flag to only render the dashboard on the most recent bar. How to Use Alignment Trading: Look for "Full House" scenarios where all arrows (15m through Daily) are the same color. Scalping Bias: Use the "Mini Timeframes" (1m, 3m, 5m) to find entries that align with the higher timeframe trend shown in the main table. Volatility Filter: Only take trades when the volatility marker (•) is active to ensure there is enough "power" in the move.
Wskaźnik Pine Script®
od realmacgyver77
5
Daily/Weekly FVG by KrisThis indicator is a Multi-Timeframe (MTF) tool designed to automatically identify and project Fair Value Gaps (Imbalances) from Daily and Weekly timeframes onto your current chart. It helps traders locate higher-timeframe Areas of Interest (POI) and liquidity voids without manually switching charts. How it works: The script utilizes `request.security` to fetch High and Low data from Daily and Weekly timeframes. It identifies a Fair Value Gap (FVG) based on the 3-candle formation logic where price moves inefficiently, leaving a gap between the wicks. - Bullish FVG: Identified when the current Daily/Weekly Low is greater than the High of the candle from 2 periods ago. - Bearish FVG: Identified when the current Daily/Weekly High is lower than the Low of the candle from 2 periods ago. The indicator draws a box extending to the right to visualize the zone, along with a dotted midline which often acts as a sensitive support/resistance level. Unique Feature: Smart Mitigation (Auto-Hide) To keep your chart clean and focused on relevant data, the script includes a "Full Fill" logic. It continuously monitors price action relative to existing FVG boxes. - If price completely crosses through a box (fully fills the gap), the indicator considers it "mitigated" and automatically hides the box and its midline (sets transparency to 100%). - This ensures you only see "fresh" or unfilled gaps that are still relevant for trading. Settings: - TF Checkboxes (Daily/Weekly FVG): Toggle the visibility of Daily or Weekly gaps independently based on your analysis needs. - Design Mode: Colored: Uses classic Green (Bullish) and Red (Bearish) colors for easy trend identification. Monochrome: Uses Gray tones for a minimalist look that reduces visual noise on the chart. Usage: Use these zones to identify potential reversal points or liquidity targets. Since these are higher-timeframe levels, they often carry more weight than intraday imbalances.
Wskaźnik Pine Script®
od KRISTRADER1
6
The Strat - Multi-Timeframe Combo Analyzer## 📊 The Strat - Multi-Timeframe Combo Analyzer This open-source indicator implements **The Strat** methodology, a universal price action framework developed by Rob Smith (@RobInTheBlack). --- ### 🎯 What is The Strat? The Strat categorizes every candle into one of three scenarios based on its relationship to the previous bar: | Type | Name | Definition | |------|------|------------| | **1** | Inside Bar | High < Previous High AND Low > Previous Low | | **2** | Directional | Breaks only one side (2↑ = broke high, 2↓ = broke low) | | **3** | Outside Bar | Breaks BOTH previous high AND low | By tracking these bar types across timeframes, traders can identify actionable setups with defined entry triggers and target levels. --- ### ✨ Features **Daily Timeframe Analysis:** - Real-time 3-bar combo detection (2-1-2, 3-1-2, 1-2-2, etc.) - Pattern classification: Bullish/Bearish Continuation or Reversal - Entry and Target levels based on Strat rules - Pattern status: ACTIONABLE, IN-FORCE, TRIGGERED, or WATCHING **ATR Context:** - Range % used (how much of daily ATR has been consumed) - Entry quality assessment (Excellent → Exhausted) - Day type classification (Quiet → Trend Day) - Remaining range estimation **15-Minute Analysis:** - Separate combo tracking for intraday precision - Pattern detection on lower timeframe **Visuals:** - Customizable info tables - Entry/Target horizontal lines - Signal labels on chart - Alert conditions --- ### 🔧 How to Use 1. Look for **ACTIONABLE** patterns - these are setups waiting for a trigger 2. Entry triggers when price breaks the designated level 3. Target is the next logical Strat level (typically prior bar's high/low) 4. Use **Range%** to assess if there's room left in the daily range 5. Combine Daily and 15-Min combos for trade confluence --- ### ⚠️ Disclaimer This indicator is for **educational purposes only**. It does not constitute financial advice or guarantee profitable trades. Trading involves substantial risk of loss. Past performance is not indicative of future results. Always conduct your own research and trade responsibly. --- ### 🙏 Credits **The Strat** methodology was created by Rob Smith (@RobInTheBlack). This implementation is open-source. Feel free to study, modify, and improve the code!
Wskaźnik Pine Script®
od StonkTrader4
3