Rozpocznij

Stop

Signal Architect Stop-HuntStop-Hunt Proxy (Auto-Config) — Signal Architect™ What this script does The Stop-Hunt Proxy is a market-structure and liquidity observation tool designed to highlight areas where stop-loss liquidity is likely raided and price fails to continue, often revealing absorption or auction failure behavior. This script does not predict direction. It does not authorize trades. It identifies where intent failed, not what price must do next. Think of it as a liquidity awareness layer, not a signal system. Core behavior detected The script combines several structural components: Prior swing highs / lows Areas where stop-loss orders often cluster. ATR-scaled liquidity zones Zones automatically expand or contract based on volatility. Wick dominance Long wicks relative to range suggest failed continuation. Absorption proxies (BSP / VDP) Volume-weighted pressure imbalance that may indicate opposition. VWAP interaction (optional) Reclaim or failure provides auction context. When these align, the script highlights a stop-hunt (liquidity harvest) event. Visual elements Liquidity Zones (Clouds) Zones appear above prior highs and below prior lows. Thickness adapts automatically to current volatility. These represent areas of potential stop-loss concentration. Stop-Hunt Arrows Arrows appear only when multiple filters align, such as: Liquidity zone is raided Wick structure shows rejection Optional absorption behavior is present Optional VWAP context confirms failure or reclaim An arrow means: Liquidity was taken and continuation failed. It does NOT mean: A reversal is guaranteed A trade should be taken Price must move in a certain direction Suggested timeframes (IMPORTANT) This script is most reliable on larger intraday and higher timeframes, where liquidity structure is clearer and noise is reduced. ⭐ Best-performing timeframes 30-minute 1-hour 2-hour 4-hour Daily (context only) Acceptable lower timeframes (with caution) 15-minute 5-minute (structure confirmation only) Lower timeframes may produce more frequent signals, but also more noise and false context. The strength of this tool increases as timeframe increases. Best use cases This script is best used for: Identifying liquidity harvest events Detecting failed breakouts or breakdowns Providing context for WAIT vs observe Confirming auction failure before continuation elsewhere Complementing: VWAP / Anchored VWAP Auction or market-state models Volatility and participation analysis It is especially useful during: Range-to-rotational markets Post-breakout failures Areas of obvious prior highs/lows What this script is NOT designed for ❌ Trade automation ❌ Buy/sell alerts ❌ Scalping systems ❌ Predictive forecasting ❌ Profit modeling If you are looking for explicit trade instructions, this script is not intended for that purpose. How to use it correctly Observe the zone Did price raid a prior high or low? Observe the reaction Did price fail to continue after taking liquidity? Check the context VWAP behavior Volatility regime Higher-timeframe structure Assign NO immediate outcome The correct response is often WAIT. This tool helps answer: Where was liquidity taken? Did price accept or reject after? Is intent being revealed or denied? Design philosophy — Signal Architect™ Markets move through liquidity, not opinion. This script exists to highlight where the market attempted something and failed, which is often more informative than where it succeeded. Liquidity was taken. Intent was revealed. Outcome remains unassigned. Final reminder Educational use only. Not financial advice. Trading and investing involve substantial risk, including possible loss of principal.
Wskaźnik Pine Script®
od SignalArchitecT_AI
Signal Architect Stop-Hunt (Auto-Config) 🧠 Signal Architect™ Stop-Hunt Proxy (Auto-Config) — HOW TO USE IT What this is: A liquidity-raid + absorption detector that highlights when stops are likely swept and price fails to continue, implying forced positioning + reversal risk. This is NOT: a momentum indicator a breakout tool a trend follower It is a reaction-point locator. 1️⃣ WHAT THE STUDY IS ACTUALLY SHOWING A. Zones (the clouds) These are where stops cluster: 🔴 Red Zone (Above highs) → short stops likely 🟢 Green Zone (Below lows) → long stops likely They are built from: prior swing high / swing low ATR-scaled thickness volatility-adaptive sizing 👉 If price never enters a zone, nothing is happening. B. The Trigger (arrows) An arrow only prints when ALL of this occurs: Price raids stops wicks into a stop zone Fails to continue wick dominance ≥ threshold Absorption occurs volume shows opposition (BSP vs VDP) VWAP context holds reclaim (bull) or failure (bear) This is liquidity taken — not continuation. 2️⃣ WHEN THIS STUDY IS VALID (VERY IMPORTANT) ✅ BEST CONDITIONS Use this only when: Market is range-to-rotational VWAP is active and respected ATR is expanding or elevated Prior highs/lows are obvious This is excellent for: /NQ, /ES, /RTY QQQ, SPY Large-cap equities ❌ DO NOT USE WHEN Strong trend day VWAP is irrelevant News-driven vertical expansion Low-volume chop If you ignore this, it will intentionally NOT perform. 3️⃣ HOW TO EXECUTE A SIGNAL (STRUCTURAL LOGIC) This is not “buy/sell” — this is position framing. 🟢 Bullish Stop-Hunt Arrow (below price) Meaning Long stops were raided → sellers absorbed → price failed lower. Correct response Expect mean reversion Expect VWAP / value re-test Expect range repair DO NOT Chase the arrow Assume trend reversal Ignore higher-TF bias 🔴 Bearish Stop-Hunt Arrow (above price) Meaning Short stops were raided → buyers absorbed → price failed higher. Correct response Expect pullback Expect VWAP fade Expect range rotation 4️⃣ TIMEFRAME USAGE (THIS MATTERS) Chart TF Use Case 1–3m Entry refinement only 5–15m ⭐ PRIMARY 30m Range structure 1H Bias only This study is NOT designed for: Daily charts Very low-liquidity names 5️⃣ HOW IT FITS INTO YOUR SYSTEM (KEY) This study should NEVER stand alone. Best pairings: VWAP / Anchored VWAP Your Auction / Trap studies Gamma / Charm context Range / balance logic Think of it as: “The market tried to go somewhere… and failed.” That’s information — not a trade. 6️⃣ INPUT TUNING (PRACTICAL) Default (balanced) swingLookback: 20 wickRatio: 0.60 autoZoneScale: ON useVWAPfilter: ON useAbsorption: ON More aggressive (scalp) wickRatio: 0.50 confirmWithinBars: 1 More selective (swing) wickRatio: 0.65–0.70 confirmWithinBars: 0 7️⃣ WHAT THIS STUDY MAKES YOU AWARE OF This tool teaches you to see: where liquidity was taken where institutions opposed where retail is trapped where price is vulnerable That awareness is the edge. ✅ 1) WHY YOU MIGHT NOT SEE ARROWS FIRING There are a few reasons this can happen: 🔹 A) SIGNAL LOGIC IS TOO STRICT This indicator only prints arrows when all of these conditions are met: A stop zone is raided (wick touches the zone) Wick shape passes the ratio filter VWAP requirement passes (if enabled) Absorption tell passes (if enabled) Optional confirm within N bars logic passes If your market / timeframe never satisfies all, arrows won’t show. 🔹 B) INPUTS MAY BE TOO SELECTIVE Defaults are conservative: wickRatio = 0.60 confirmWithinBars = 0 Try these relaxed settings: wickRatio -> 0.50 useVWAPfilter -> false useAbsorptionOK -> false confirmWithinBars -> 1 That means: 👉 Loose filter → more possible arrow prints 🔹 C) ZONE DEFINITIONS MAY BE OFF FOR YOUR TF OR MARKET Zones are drawn off the last 20-bar swing. If your chart isn’t finding sharp swings, raids may be rare. Try: swingLookback -> 10 🔹 D) VISUAL SETTINGS BLOCK THEM If showArrows = false or labels are overlapping, arrows may not draw clearly. Set: showArrows -> true 👉 QUICK TEST MODE Apply these settings on a live chart (like /ES 5m): swingLookback = 10 wickRatio = 0.50 useVWAPfilter = false useAbsorptionOK = false confirmWithinBars = 1 Then scroll a few bars back and reload. If arrows still don’t show, tell me: 📌 which ticker 📌 which timeframe 📌 a sample date/time range chatgpt.com
Wskaźnik Pine Script®
od SignalArchitecT_AI
EDUVEST UTBOT ADJ - Adaptive ATR Trailing StopEDUVEST UTBOT ADJ - Adaptive ATR Trailing Stop with Session-Based Sensitivity ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ █ ORIGINALITY This indicator is an enhanced version of the classic UT Bot concept, featuring automatic session-based ATR sensitivity adjustment. Unlike the original UT Bot which uses a fixed sensitivity value, this version dynamically adapts to different trading sessions (Tokyo, London, New York) and automatically detects asset characteristics to optimize signal generation. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ █ WHAT IT DOES - Generates BUY and SELL signals based on ATR trailing stop crossovers with a moving average - Automatically adjusts sensitivity based on current trading session (Tokyo/London/NY) - Auto-detects asset type and applies optimized parameters for each instrument - Displays real-time session information and volatility status - Provides alert functionality with customizable cooldown periods ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ █ HOW IT WORKS 【Core Logic: ATR Trailing Stop】 The indicator calculates an ATR-based trailing stop using the formula: Trailing Stop = Price ± (Sensitivity × ATR) When price is above the trailing stop and rising, the stop trails below price. When price is below the trailing stop and falling, the stop trails above price. 【Signal Generation】 - BUY Signal: Price crosses above the trailing stop AND Moving Average crosses above the trailing stop - SELL Signal: Price crosses below the trailing stop AND Moving Average crosses below the trailing stop 【Session-Based Sensitivity Adjustment】 The indicator adjusts ATR sensitivity based on trading session (JST timezone): - Tokyo (08:00-15:00): Lower sensitivity (reduced by adjustment value) - typically quieter markets - London (15:00-23:00): Base sensitivity - moderate volatility - New York (23:00-08:00): Higher sensitivity (increased by adjustment value) - higher volatility 【Dynamic ATR Adjustment】 When enabled, the indicator compares current ATR to its smoothed average: - ATR Ratio = Current ATR / SMA(ATR, smoothing period) - Volatility Multiplier = 1.0 + (Sensitivity × (2.0 - ATR Ratio)) This reduces sensitivity during high volatility (fewer false signals) and increases sensitivity during low volatility (faster response). 【Auto Asset Detection】 The indicator automatically detects the traded instrument and applies optimized parameters: - Stable pairs (USDJPY, EURUSD, USDCHF): Base sensitivity 1.5-1.8 - Moderate pairs (AUDUSD, USDCAD, EURJPY): Base sensitivity 2.0-2.3 - Volatile pairs (GBPUSD): Base sensitivity 2.8 - Commodities (GOLD/XAUUSD): Base sensitivity 3.5 - Indices (NASDAQ/NAS100): Base sensitivity 4.0 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ █ HOW TO USE 【Recommended Settings】 - Timeframe: 15 minutes or higher (15M, 1H, 4H recommended) - Best performance on: Forex majors, Gold, NASDAQ - Enable "Auto Asset Detection" for optimized parameters 【Entry Rules】 - BUY: Enter long when green BUY label appears - SELL: Enter short when pink SELL label appears 【Session Panel】 The top-right panel displays: - Current trading session (Tokyo/London/NY) - Volatility status (High Chance/Medium Chance/Caution) - Mode (AUTO/MANUAL) 【Alert Setup】 1. Enable "Viewer Alert Display" in settings 2. Set cooldown period (default: 15 minutes) to avoid signal spam 3. Create alert with "Any alert() function call" condition 【Important Notes】 - This indicator does not repaint - signals are confirmed at bar close - Lower timeframes (1M, 5M) may generate excessive signals - Always use proper risk management and confirm with other analysis ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ █ SETTINGS OVERVIEW 🎯 Alert Settings - Viewer Alert Display: Enable/disable alert labels - Cooldown Function: Prevent rapid consecutive signals - Cooldown Time: Minutes between alerts (5-60) 🔧 Dynamic ATR Settings - Enable Dynamic ATR: Auto-adjust based on volatility - ATR Period: Calculation period (default: 14) - ATR Smoothing: Smoothing period for ratio calculation - Volatility Sensitivity: How much to adjust (0.1-1.0) 🕐 Session ATR Adjustment - Enable Time Adjustment: Session-based sensitivity - Show Session Info: Display session panel 📊 Asset Settings - Auto Asset Detection: Automatically optimize for instrument - Manual settings available when auto-detection is disabled ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ █ CREDITS Based on the original UT Bot concept by QuantNomad. Enhanced with session-based adaptation and auto-asset detection by EduVest. License: Mozilla Public License 2.0
Wskaźnik Pine Script®
od EduVest_doro
MDZ Strategy v4.2 - Multi-factor trend strategyWhat This Strategy Does MDZ (Momentum Divergence Zones) v4.2 is a trend-following strategy that enters long positions when multiple momentum and trend indicators align. It's designed for swing trading on higher timeframes (2H-4H) and uses ATR-based position management. The strategy waits for strong trend confirmation before entry, requiring agreement across five different filters. This reduces trade frequency but aims to improve signal quality. Entry Logic A long entry triggers when ALL of the following conditions are true: 1. EMA Stack (Trend Structure) Price > EMA 20 > EMA 50 > EMA 200 This "stacked" alignment indicates a strong established uptrend 2. RSI Filter (Momentum Window) RSI between 45-75 (default) Confirms momentum without entering overbought territory 3. ADX Filter (Trend Strength) ADX > 20 (default) Ensures the trend has sufficient strength, not a ranging market 4. MACD Confirmation MACD line above signal line Histogram increasing (momentum accelerating) 5. Directional Movement +DI > -DI Confirms bullish directional pressure Exit Logic Positions are managed with ATR-based levels: ParameterDefaultDescriptionStop Loss2.5 × ATRBelow entry priceTake Profit6.0 × ATRAbove entry priceTrailing Stop2.0 × ATROptional, activates after entry The default configuration produces a 1:2.4 risk-reward ratio. Presets The strategy includes optimized presets based on historical testing: PresetTimeframeNotes1H Standard1 HourMore frequent signals2H Low DD2 HourConservative settings3H Optimized3 HourBalanced approach4H Swing4 HourWider stops for swing tradesCustomAnyFull manual control Select "Custom" to adjust all parameters manually. Inputs Explained EMAs Fast EMA (20): Short-term trend Slow EMA (50): Medium-term trend Trend EMA (200): Long-term trend filter RSI Length: Lookback period (default 14) Min/Max: Entry window to avoid extremes ADX Min ADX: Minimum trend strength threshold Risk Stop Loss ATR: Multiplier for stop distance Take Profit ATR: Multiplier for target distance Trail ATR: Trailing stop distance (if enabled) Session (Optional) Filter entries by time of day Recommended OFF for 3H+ timeframes What's Displayed Info Panel (Top Right) Current preset Trend status (Strong/Wait) ADX, RSI, MACD readings Position status Risk-reward ratio Stats Panel (Top Left) Net P&L % Total trades Win rate Profit factor Maximum drawdown Chart EMA lines (20 blue, 50 orange, 200 purple) Green background during strong uptrend Triangle markers on entry signals Important Notes ⚠️ This is a long-only strategy. It does not take short positions. ⚠️ Historical results do not guarantee future performance. Backtests show what would have happened in the past under specific conditions. Markets change, and any strategy can experience drawdowns or extended losing periods. ⚠️ Risk management is your responsibility. The default settings risk 100% of equity per trade for backtesting purposes. In live trading, appropriate position sizing based on your risk tolerance is essential. ⚠️ Slippage and commissions matter. The backtest includes 0.02% commission and 1 tick slippage, but actual execution costs vary by broker and market conditions. Best Practices Test on your specific market — Results vary significantly across different instruments Use appropriate position sizing — Never risk more than you can afford to lose Combine with your own analysis — No indicator replaces understanding market context Paper trade first — Validate the strategy matches your trading style before risking capital Alerts Two alerts are available: MDZ Long Entry: Fires when all entry conditions are met Uptrend Started: Fires when EMA stack first aligns bullish Methodology This strategy is based on the principle that trend continuation has better odds than reversal when multiple timeframe momentum indicators agree. By requiring five independent confirmations, it filters out weak setups at the cost of fewer total signals. The ATR-based exits adapt to current volatility rather than using fixed pip/point targets, which helps the strategy adjust to different market conditions. Questions? Leave a comment below.
Strategia Pine Script®
od VolForge
Live Position Sizer (LPS)Description (EN) (Magyar leíráshoz görgess lejjebb!) Live Position Sizer (LPS) is a discretionary trading utility designed to visualize risk, reward, and position size directly on the chart in real time. The indicator draws a TradingView-style long or short position box and calculates the required position size based on your defined capital, maximum risk, stop-loss distance, and a user-defined lot conversion factor. LPS is intended strictly as a decision-support and risk management tool. It does not place trades or generate automated signals. Core features: Automatic Long / Short position visualization Dynamic Entry, Stop Loss, and Take Profit levels Real-time position size calculation Configurable Risk/Reward ratio Fully customizable colors, transparency, and line styles Clean, minimal on-chart labels showing direction, RR, and lot size Only one active position box at a time for a clutter-free chart Position sizing logic: TradingView internally calculates position size in units, not broker-specific lots. To bridge this difference, LPS uses a user-defined “Units per 1 Lot” multiplier. Examples: Forex (standard lot): 100000 Gold (XAUUSD): 1 or 100 (broker dependent) Indices (e.g. NAS100): 1 The indicator first calculates the position size in TradingView units and then converts it to lots using this multiplier. The displayed lot size is rounded to 0.01 lots. Stop Loss logic: The Stop Loss level is derived from the High or Low of a selectable previous candle. Increasing the bar-back value places the Stop Loss further away, which: increases stop distance reduces position size for the same risk Intended use: Manual / discretionary trading Risk management and position sizing Trade planning and visualization Educational purposes Important notes: This indicator does not execute trades No alerts or automation by default Lot size and contract specifications vary by broker Always verify the exact lot or contract size with your broker before trading ------------------------------------ Description (HU) A Live Position Sizer (LPS) egy diszkrecionális kereskedést támogató segédindikátor, amely valós időben jeleníti meg a kockázatot, a célárat és a pozícióméretet közvetlenül a charton. Az indikátor TradingView-stílusú long vagy short pozíció boxot rajzol, és kiszámolja a szükséges pozícióméretet a megadott tőke, maximális kockázat, stop-loss távolság és egy felhasználó által definiált LOT szorzó alapján. Az LPS nem stratégia, kizárólag döntéstámogató és kockázatkezelési eszköz. Fő funkciók: Automatikus Long / Short pozíció megjelenítés Entry, Stop Loss és Take Profit szintek vizuális ábrázolása Valós idejű pozícióméret számítás Állítható Risk/Reward arány Teljesen testreszabható színek, átlátszóság és vonalstílus Letisztult chart label (irány, RR, lot méret) Egyszerre csak egy aktív pozíció box Pozícióméretezési logika: A TradingView belsőleg egységekben (units) számol, nem bróker-specifikus LOT-okban. Ennek kezelésére az LPS egy „Units per 1 Lot” beállítást használ. Példák: Forex standard lot: 100000 Arany (XAUUSD): 1 vagy 100 (brókertől függ) Indexek (pl. NAS100): 1 Az indikátor először TradingView egységekben számol, majd ezt átváltja LOT-ra a megadott szorzó segítségével. A kijelzett LOT méret 0.01-re van kerekítve. Stop Loss logika: A Stop Loss szint a kiválasztott korábbi gyertya high vagy low értékéből kerül meghatározásra. Nagyobb bar-back érték: távolabb helyezi a stopot azonos kockázat mellett kisebb pozícióméretet eredményez Ajánlott felhasználás: Manuális, diszkrecionális kereskedés Kockázatkezelés és pozícióméretezés Trade tervezés Oktatási célok Fontos megjegyzések: Az indikátor nem köt automatikusan Alapértelmezetten nincs alert vagy automatizmus A LOT és contract méret brókerenként eltérhet Kereskedés előtt mindig ellenőrizd a pontos LOT / contract specifikációt a brókerednél
Wskaźnik Pine Script®
od mildZebra14333
Infinity Algo█ OVERVIEW Infinity Algo is an all-in-one signal system with 5 entry modes, 6 take-profit levels, and built-in Auto-Tune optimization. Switch between trend-following, contrarian, and sniper modes based on market conditions — all within one indicator. Auto-Tune tests 500+ parameter combinations to selects the best-scoring settings from historical simulations. Includes on-chart TP/SL visualization, trailing stop modes, and webhook-ready alerts. █ KEY FEATURES ✅ 5 Signal Modes: Normal, Smart, AI, HL Sniper, AI Sniper ✅ 3 Exit Modes: Percentage targets, Signal step-outs, Opposite signal ✅ 6 Take-Profit Levels with on-chart visualization ✅ Trailing Stop-Loss (Breakeven / Moving Target) ✅ Auto-Tune Parameter Optimization ✅ Visual Helpers: Bar coloring, gradient background, "signal coming" markers ✅ Built-in alert conditions for automation ✅ Designed for crypto, forex, stocks, indices, and commodities █ WHAT MAKES THIS INDICATOR DIFFERENT 🧠 Auto-Tune Engine Most indicators use static settings that fail when volatility shifts. Auto-Tune tests 500+ parameter combinations in the background — varying sensitivity, thresholds, and trigger configs — selects the best-scoring settings from historical simulations. Choose from 12 scoring metrics: Sharpe Ratio, Sortino Ratio, Calmar Ratio, SQN, Martin Ratio, GPR, Win Rate, Total Profit, Average Profit, Profit Factor, and more. Note: Auto-Tune is systematic parameter optimization on historical data — not predictive AI. Past performance does not guarantee future results. 🎯 Multi-Mode Signal System One indicator, five signal modes: Normal: Contrarian entries against the trend filter Smart: Trend-following entries with the trend filter Auto-Tune: Auto-optimized momentum signals HL Sniper: More selective trend triggers Auto-Tune Sniper: Auto-optimized sniper configuration 🛡️ Adaptive Risk Management Trailing SL modes that respond to your TP hits — not arbitrary price levels. Lock in breakeven or ratchet your stop as profit grows. 👁️ Anticipation Markers "Possible Long/Short Coming" labels appear when momentum approaches signal levels — giving you time to prepare before the signal fires. █ SIGNAL MODES EXPLAINED Normal + Smart (Default) The dual-mode system that adapts to market conditions: Normal Signals: Momentum threshold cross against the trend filter — contrarian plays for reversals and range boundaries Smart Signals: Momentum threshold cross with the trend filter — trend-following plays for continuation moves Auto-Tune Mode Let the optimization engine find best-scoring settings: Tests 500+ parameter combinations against historical data Simulates trades using your configured TP/SL levels Scores each configuration by your chosen metric (Sharpe, Sortino, Win Rate, etc.) Walk-Forward: Re-optimizes every N bars to adapt to regime changes Static: Locks in best-scoring settings from full available history HL Sniper For traders who prefer quality over quantity: Trend-trigger mode for more selective entries Fewer signals, more selective setups Best suited for volatile markets where patience matters Auto-Tune Sniper Combines sniper selectivity with automatic optimization: Optimizes RSI period, smoothing factor, and trigger sensitivity Adapts configuration based on historical performance Selective entries + adaptive parameters █ EXIT & RISK MANAGEMENT Percentage Targets Up to 6 TP levels (TP1…TP6) with on-chart lines and labels Configure price distance (%) and position size (%) for each level Designed for scaling out positions systematically Signal Step-Outs Momentum-shift condition triggers partial exits Optional higher-timeframe confirmation for stronger signals "New TP Must Beat Last" prevents weak consecutive exits Opposite Signal Closes/flips position when the next opposite entry signal appears Simple and effective for trend-following systems Stop-Loss & Trailing Fixed SL as % from entry (configurable separately for long/short) Breakeven: Moves SL to entry price after chosen TP is hit Moving Target: Advances SL to previous TP level as profit grows █ VISUAL HELPERS On-Chart TP/SL Lines: See your targets and stops directly on the chart Bar Coloring: Candles colored by current signal bias Background Gradient: Visual confirmation of position direction "Possible Signal Coming" Markers: Anticipate entries before they trigger Peak Profit Label: Track maximum unrealized profit during trades █ AUTO-TUNE DASHBOARD When Auto-Tune is enabled, the dashboard displays: Current Parameters: Active sensitivity, thresholds, or sniper config Simulated Performance: Trade count, win rate, P&L from internal backtest Confidence Score: Stability indicator based on agreement among top configurations Note: Auto-Tune is automated parameter selection on historical data — not predictive AI. It cannot guarantee future performance. █ USE CASES 📈 Trending Markets Use "Smart" signals + Percentage TPs. Stay aligned with momentum while scaling out at multiple targets. Enable Moving Target trailing to maximize winners. 📉 Ranging / Choppy Markets Use "Normal" signals (contrarian mode). Catch reversals at range boundaries. Tighter TP targets and quicker exits work best. ⚡ High Volatility / News Events Use "HL Sniper" for selective entries. Fewer signals, more selective. Wider SL to accommodate volatility. 🧪 New Asset / Unfamiliar Market Enable "AI" mode and let Auto-Tune find optimal parameters. Great for exploring new markets without manual optimization. 🤖 Automation & Bots Structured alert payloads work with popular bot platforms and custom webhooks. Entry + 6 TPs + SL in one alert. █ HOW TO USE Apply to your chart (any timeframe, any market) Choose your signal mode based on market conditions Pick your direction (Long / Short / Both) Select exit mode: Percentage, Signals, or Opposite Signal Configure TP levels and position sizing Enable Stop-Loss and choose a trailing mode Optional: Enable Auto-Tune for adaptive optimization Set alerts for signals and TP/SL events █ ALERTS Built-in alert conditions for: All entry signal types (Normal, Smart, AI, HL Sniper, AI Sniper) TP hits (percentage levels or signal-based steps) SL touch events "Possible Long/Short Coming" anticipation markers Tip: Create separate alerts for each condition. Use TradingView placeholders ({{ticker}}, {{close}}) in your alert messages. █ WORKS ON Crypto Forex Stocks Indices Commodities █ REALISTIC EXPECTATIONS No indicator wins 100% of the time — this is no exception Signals should be combined with your own analysis Auto-Tune optimizes on past data — it cannot predict the future Always use proper position sizing and risk management Paper trade or backtest before risking real capital █ LIMITATIONS Signals and overlays are decision-support tools — they cannot eliminate losses Auto-Tune can overfit if used without out-of-sample validation Multi-timeframe logic confirms on higher-TF closes — slight delay is expected Best evaluated on standard candles with realistic fee/slippage assumptions █ DISCLAIMER This indicator is provided for educational and informational purposes only and does not constitute financial advice. Past performance is not indicative of future results. Trading involves substantial risk of loss, and you are solely responsible for your own trading decisions.
Wskaźnik Pine Script®
od InfinityAlgo
2
Omni-Trend Analytics + Live PnL DashboardOverview The Omni-Trend Analytics suite is an all-in-one technical command center. It integrates the battle-tested UT Bot signal logic with a sophisticated real-time dashboard, session tracking, and multi-timeframe trend analysis. 📊 The "Nexus" Dashboard The heart of this script is the 6-row dynamic dashboard, designed to give you "at-a-glance" confluence: RSI & RSI-MA: Tracks the standard RSI alongside a custom RSI-based Moving Average to spot momentum shifts before they hit the price. Selectable Trend Status: Unlike static indicators, you can toggle the "Trend" source between EMA 9, 20, or 200 in the settings to match your trading style (Scalping vs. Swing). Distance to EMA: Shows exactly how "overextended" the price is from your selected trend line. ATR Volatility (Color-Coded): Turns Green when volatility is expanding (ideal for trend following) and Red when the market is contracting (ideal for range-trading or caution). Live PnL Tracking: Automatically calculates the profit or loss of the most recent UT Bot signal in real-time. 🛠️ Key Features & Settings Precision Signals: Combines UT Bot Buy/Sell labels with RSI "!" reversal warnings for high-probability entries. Institutional Moving Averages: Includes 5 SMAs (including the 610 SMA) and 3 EMAs (9, 20, 200) all set to a professional Thickness 2 for clarity. Session Highlighting: Automatically shades the background for London and New York sessions to help you trade when liquidity is highest. VWAP Integration: Includes a purple VWAP line to ensure you are trading at a "fair value" relative to volume. 🔔 Strategic Alert Suite The script comes pre-loaded with 6 specialized alert conditions: UT Bot Signal: Standard entry alerts. RSI Cross RSI-MA: Early warning for momentum reversals. High-Prob UT + VWAP: Signals that only trigger when aligned with institutional volume. EMA 9/20 Momentum Cross: Classic trend-shift notification. ATR Volatility Spike: Alerts you to 50% increases in market volatility. PnL Target / Break-Even: Pings you when your live trade reaches a user-defined profit threshold. 💡 Trading Pro-Tip The Convergence Strategy: Look for a UT Bot Buy signal that occurs during the London/NY Overlap while the ATR is Green (expanding) and the RSI is crossing over its RSI-MA. This "triple confluence" is the primary design intent of the Omni-Trend suite.
Wskaźnik Pine Script®
od aarrsm
EMA Cross + RSI + ADX - Autotrade Strategy V2Overview A versatile trend-following strategy combining EMA 9/21 crossovers with RSI momentum filtering and optional ADX trend strength confirmation. Designed for both cryptocurrency and traditional futures/options markets with built-in stop loss management and automated position reversals. Key Features Multi-Market Compatibility: Works on both crypto futures (Bitcoin, Ethereum) and traditional markets (NIFTY, Bank NIFTY, S&P 500 futures, equity options) Triple Confirmation System: EMA crossover + RSI filter + ADX strength (optional) Automated Risk Management: 2% stop loss with wick-touch detection Position Auto-Reversal: Opposite signals automatically close and reverse positions Webhook Ready: Six distinct alert messages for automation (Entry Buy/Sell, Close Long/Short, SL Hit Long/Short) Performance Metrics NIFTY Futures (15min): 50%+ win rate with ADX filter OFF Crypto Markets: Requires extensive backtesting before live deployment Optimal Timeframes: 15-minute to 1-hour charts (patience required for higher timeframes) Strategy Logic Entry Signals: LONG: EMA 9 crosses above EMA 21 + RSI > 55 + ADX > 20 (if enabled) SHORT: EMA 9 crosses below EMA 21 + RSI < 45 + ADX > 20 (if enabled) Exit Signals: Opposite EMA crossover (auto-closes current position) Stop loss hit at 2% from entry price (tracks candle wicks) Technical Indicators: Fast EMA: 9-period (short-term trend) Slow EMA: 21-period (primary trend) RSI: 14-period with 55/45 thresholds (momentum confirmation) ADX: 14-period with 20 threshold (trend strength filter - optional) Market-Specific Settings Traditional Markets (NIFTY, Bank NIFTY, S&P Futures, Options) Recommended Settings: ADX Filter: Turn OFF (less choppy, cleaner trends) Timeframe: 15-minute chart Win Rate: 50%+ on NIFTY Futures Why No ADX: Traditional markets have more institutional participation and smoother price action, making ADX unnecessary Cryptocurrency Markets (BTC, ETH, Altcoins) Recommended Settings: ADX Filter: Turn ON (ADX > 20) Timeframe: 15-minute to 1-hour Extensive backtesting required before live trading Why ADX: Crypto markets are highly volatile and prone to false breakouts; ADX filters low-quality chop Best Practices ✅ Backtest thoroughly on your specific instrument and timeframe ✅ Use larger timeframes (1H, 4H) for higher quality signals and better risk/reward ✅ Adjust RSI thresholds based on market volatility (try 52/48 for more signals, 60/40 for fewer but stronger) ✅ Monitor ADX effectiveness - disable for traditional markets, enable for crypto ✅ Proper position sizing - adjust default_qty_value based on your capital and instrument price ✅ Paper trade first - test for 2-4 weeks before risking real capital Risk Management Fixed 2% stop loss per trade (adjustable) Stop loss tracks candle wicks for accurate execution Positions auto-reverse on opposite signals (no manual intervention needed) 0.075% commission built into backtest (adjust for your broker) Customization Options All parameters are adjustable via inputs: EMA periods (default: 9/21) RSI length and thresholds (default: 14-period, 55/45 levels) ADX length and threshold (default: 14-period, 20 threshold) Stop loss percentage (default: 2%) Webhook Automation This strategy includes six distinct alert messages for automated trading: "Entry Buy" - Long position opened "Entry Sell" - Short position opened "Close Long" - Long position closed on opposite crossover "Close Short" - Short position closed on opposite crossover "SL Hit Long" - Long stop loss triggered "SL Hit Short" - Short stop loss triggered Compatible with Delta Exchange, Binance Futures, 3Commas, Alertatron, and other webhook platforms. Important Notes ⚠️ Crypto markets require extensive backtesting - volatility patterns differ significantly from traditional markets ⚠️ Higher timeframes = better results - 15min works but 1H/4H provide cleaner signals ⚠️ ADX toggle is critical - OFF for traditional markets, ON for crypto ⚠️ Not financial advice - always conduct your own research and use proper risk management ⚠️ Past performance ≠ future results - backtest results may not reflect live trading conditions Disclaimer This strategy is for educational and informational purposes only. Trading futures and options involves substantial risk of loss. Always backtest thoroughly, start with paper trading, and never risk more than you can afford to lose. The author assumes no responsibility for any trading losses incurred using this strategy.
Strategia Pine Script®
od varuns_back
5
Simplified ATR Trailing Stop (Long & Short, Custom TF + Stop)This indicator plots a dynamic ATR-based trailing stop that adapts to price volatility and keeps you protected whether you’re trading long or short. It’s lightweight, customisable, and designed for traders who want clean risk management without unnecessary complexity. ✨ Key Features: 📅 Custom Entry Date & Price – choose the exact day you want the trailing stop to begin, or let it auto-start from the close. 🔀 Long or Short Mode – flip between bullish and bearish trade setups. ⏱️ Custom Timeframe Support – calculate ATR stops on any higher/lower timeframe (from 10m to 1M) for maximum flexibility. 📏 ATR-Based Logic – trailing stop adjusts dynamically using a multiplier of ATR, keeping stops adaptive to volatility. 🎯 Custom First-Day Stop – set a different ATR factor for day one to handle entries more cautiously. ✅ Stop Trigger Mode – choose between: Stop on Wick Breach (default intraday aggressiveness) Stop on Candle Close (extra confirmation, fewer false stops). 📊 How to Use: Set your entry date and price (or leave price = 0 to use that day’s close). Select trade direction (Long or Short). Pick your ATR period, multiplier, and timeframe. Watch the trailing stop line update automatically until it’s breached. This tool is great for swing traders, intraday strategists, and anyone who wants a simple yet powerful trailing stop that adapts to price volatility.
Wskaźnik Pine Script®
od AugustineTheCat
ATR Position Size Calc+Stop guessing your position size. This indicator automatically calculates the optimal number of contracts or shares for each trade. It is designed for one purpose: to help you maintain consistent risk management by adjusting your trade size based on current market volatility (ATR) and your fixed monetary risk. // KEY FEATURES Consistent Risk : Set your max risk in dollars (e.g., $300), and the script calculates the exact position size to match it. Volatility-Based Stops : Uses the ATR to define a logical stop loss that adapts to market conditions. Stable Calculation : The calculation is based on the previous closed candle, so the value is reliable and doesn't change intra-bar. // HOW TO USE In the settings, simply define your max risk per trade ($) and your ATR parameters. The indicator does the rest. The essential tool for disciplined trading.
Wskaźnik Pine Script®
od phillipe_batalha
% / ATR Buy, Target, Stop + Overlay & P/L% / ATR Buy, Target, Stop + Overlay & P/L This tool combines volatility‑based and fixed‑percentage trade planning into a single, on‑chart overlay—with built‑in profit‑and‑loss estimates. Toggle between ATR or percentage modes, plot your Buy, Target and Stop levels, and see the dollar gain or loss for a specified position size—all in one interactive table and chart display. NOTE: To activate plotted lines, price labels, P/L rows and table values, enter a Buy Price greater than zero. What It Does Mode Toggle: Choose between “ATR” (volatility‑based) or “%” (fixed‑percentage) calculations. Buy Price Input: Manually enter your entry price. ATR Mode: Target = Buy + (ATR × Target Multiplier) Stop = Buy − (ATR × Stop Multiplier) Percentage Mode: Target = Buy × (1 + Target % / 100) Stop = Buy × (1 – Stop % / 100) P/L Estimates: Specify a dollar amount to “invest” at your Buy price, and the script calculates: Gain ($): Profit if Target is hit Loss ($): Cost if Stop is hit Visual Overlay: Draws horizontal lines for Buy, Target and Stop, with optional price labels on the chart scale. Interactive Table: Displays Buy, Target, Stop, ATR/timeframe info (in ATR mode), percentages (in % mode), and P/L rows. Customization Options Line Settings: Choose color, style (solid/dashed/dotted), and width for Buy, Target, Stop lines. Extend lines rightward only or in both directions. Table Settings: Position the table (top/bottom × left/right). Toggle individual rows: Buy Price; Target (multiplier or %); Stop (multiplier or %); Target ATR %; Stop ATR %; ATR Time Frame; ATR Value; Gain ($); Loss ($). Customize text colors for each row and background transparency. General Inputs: ATR length and optional ATR timeframe override (e.g. use daily ATR on an intraday chart). Target/Stop multipliers or percentages. Dollar Amount for P/L calculations. How to Use It for Trading Plan Your Entry: Enter your intended Buy Price and position size (dollar amount). Select Mode: Toggle between ATR or % mode depending on whether you prefer volatility‑based or fixed offsets. Assess R:R and P/L: Instantly see your Target, Stop levels, and potential profit or loss in dollars. Visual Reference: Lines and price labels update in real time as you tweak inputs—ideal for live trading, backtesting or trade journaling. Ideal For Traders who want both volatility‑based and percentage‑based exit options in one tool Those who need on‑chart P/L estimates based on position size Swing and intraday traders focused on objective, rule‑based trade management Anyone who uses ATR for adaptive stops/targets or fixed percentages for simpler exits
Wskaźnik Pine Script®
od abbadon9
NQ Position Size CalculatorNQ Position Size Line Calculator is designed specifically for Nasdaq 100 futures (NQ) and micro futures (MNQ) traders who want to maintain disciplined risk management. This visual tool eliminates the guesswork from position sizing by displaying distance lines and contract calculations directly on your chart. The indicator creates horizontal lines at 10-tick intervals from your stop loss level, showing you exactly how many contracts to trade at each distance to maintain your predetermined risk amount. Whether you're trading regular NQ contracts or micro MNQ contracts, this calculator ensures you never risk more than intended while providing instant visual feedback for optimal position sizing decisions. How to Use the Indicator Step 1: Configure Your Settings Stop Loss Price: Enter your exact stop loss level (e.g., 20000.00) Risk Amount ($): Set your maximum dollar risk per trade (e.g., $500) Contract Type: Choose between: NQ (Regular): $5 per tick - for larger accounts MNQ (Micro): $0.50 per tick - for smaller accounts or conservative sizing Display Options: Max Lines: Number of distance lines to show (default: 30) Show Labels: Toggle tick distance and contract count labels Line Color: Customize the color of distance lines Label Size: Choose tiny, small, or normal label sizes Step 2: Read the Visual Display Once configured, the indicator displays: Stop Loss Line: Thick yellow line marking your exact stop loss level Yellow label showing the stop loss price Distance Lines: Dashed red lines at 10-tick intervals above and below your stop loss Lines appear on both sides for long and short position planning Labels (if enabled): Green labels (right side): For long positions above your stop loss Red labels (left side): For short positions below your stop loss Format: "20T 5x" means 20 ticks distance, 5 contracts maximum Step 3: Use the Information Tables The indicator provides two helpful tables: Position Size Table (top-right): Shows common tick distances (10, 20, 40, 80, 160 ticks) Displays risk per contract at each distance Contract count for your specified risk amount Total risk with rounded contract numbers Settings Table (bottom-right): Confirms your current risk amount Shows selected contract type Displays current settings for quick reference Step 4: Apply to Your Trading For Long Positions: Look at the green labels on the right side of your chart Find your desired entry level Read the label to see: distance in ticks and maximum contracts Example: "30T 8x" = 30 ticks from stop, buy 8 contracts maximum For Short Positions: Look at the red labels on the left side of your chart Find your desired entry level Read the label for tick distance and contract count Example: "40T 6x" = 40 ticks from stop, sell 6 contracts maximum Step 5: Trading Execution Before Entering a Trade: Identify your stop loss level and input it into the indicator Choose your entry point by looking at the distance lines Note the contract count from the corresponding label Verify the risk amount matches your trading plan Execute your trade with the calculated position size Risk Management Features: Contract rounding: All position sizes are rounded down (never up) to ensure you don't exceed your risk limit Zero position filtering: Lines only show where position size is at least 1 contract Dual-sided display: Plan both long and short opportunities simultaneously
Wskaźnik Pine Script®
od birdmanx
2
Statistical Trailing Stop [LuxAlgo]The Statistical Trailing Stop tool offers traders a way to lock in profits in trending markets with four statistical levels based on the log-normal distribution of volatility. The indicator also features a dashboard with statistics of all detected signals. 🔶 USAGE The tool works out of the box, traders can adjust the data used with two parameters: data & distribution length. By default, the tool takes volatility measures of groups of 10 candles, and statistical measures of the last 100 of these groups then traders can adjust the base level to use as trailing, the larger the level, the more resistant the tool will be to moves against the trend. 🔹 Base Levels Traders can choose up to 4 different levels of trailing, all based on the statistical distribution of volatility. As we can see in the chart above, each higher level is more resistant to market movements, so level 0 is the most reactive and level 3 the least. It is up to the trader to determine the best level for each underlying, time frame and market conditions. 🔹 Dashboard The tool provides a dashboard with the statistics of all trades, making it very easy to assess the performance of the parameters used for any given market. As we can see on the chart, all Daily BTC signals with default parameters but different base levels, level 2 is the best performing of all four, giving a positive expectation of $2435 per trade, taking into account all long and short trades. Of note are the long trades with a win rate of 76.47% and a risk-to-reward of 3.34, giving a positive expectation of $4839 per trade, with winners having an average duration of 210 days and losers 32 days. This, compared to short trades with negative expectation, speaks to the uptrend bias of this particular market. 🔶 SETTINGS Data Length: Select how many bars to use per data point Distribution Length: Select how many data points the distribution will have Base Level: Choose between 4 different trailing levels 🔹 Dashboard Show Statistics: Enable/disable dashboard Position: Select dashboard position Size: Select dashboard size
Wskaźnik Pine Script®
od LuxAlgo
20
Liquidity VisualizerThe "Liquidity Visualizer" indicator is designed to help traders visualize potential areas of liquidity on a price chart. In trading, liquidity often accumulates around key levels where market participants have placed their stop orders or pending orders. These levels are commonly found at significant highs and lows, where traders tend to set their stop-losses or take-profit orders. The indicator aims to highlight these areas by drawing unbroken lines that extend indefinitely until breached by the price action. Specifically, this indicator identifies and marks pivot highs and pivot lows, which are price levels where a trend changes direction. When a pivot high or pivot low is formed, it is represented on the chart with a horizontal line that continues to extend until the price touches or surpasses that level. The line remains in place as long as the level remains unbroken, which means there is potential liquidity still resting at that level. The concept behind this indicator is that liquidity is likely to be resting at unbroken pivot points. These levels are areas where stop-loss orders or pending buy/sell orders may have accumulated, making them attractive zones for large market participants, such as institutions, to target. By visualizing these unbroken levels, traders can gain insight into where liquidity might be concentrated and where potential price reversals or significant movements could occur as liquidity is taken out. The indicator helps traders make more informed decisions by showing them key price levels that may attract significant market activity. For instance, if a trader sees multiple unbroken pivot high lines above the current price, they might infer that there is a cluster of liquidity in that area, which could lead to a price spike as those levels are breached. Similarly, unbroken pivot lows may indicate areas where downside liquidity is concentrated. In summary, this indicator acts as a "liquidity visualizer," providing traders with a clear, visual representation of potential liquidity resting at significant pivot points. This information can be valuable for understanding where price might be drawn to, and where large movements might occur as liquidity is targeted and removed by market participants.
Wskaźnik Pine Script®
od MHermes
1
Trailing Stop ProTrailing Stop Pro is a sophisticated TradingView indicator designed to enhance your trading strategy by dynamically managing trailing stops based on market volatility. This tool leverages the Average True Range (ATR) to adjust stop levels, providing traders with a robust mechanism to protect profits and minimize losses. Key Features: Dynamic Trailing Stops: Automatically adjusts stop levels using ATR, allowing for responsive and adaptive risk management. Customizable Inputs: Tailor the indicator to your trading style with adjustable parameters such as ATR Length, ATR Multiplier, and Source Vector. Visual Clarity: Distinct color settings for long and short stops, with adjustable line thickness and transparency, ensuring clear visualization on your charts. Professional Grade: The "Pro" designation signifies advanced features suitable for both novice and experienced traders seeking reliable and efficient stop management. How It Works: To set up the indicator, begin by defining the Chrono Point, which specifies the exact time you want the trailing stop mechanism to activate. This allows for precise control over when your stops begin to trail. Next, set the Credit Unit as the initial entry price for your trade, serving as the baseline from which the trailing stops will adjust. The indicator uses ATR-based adjustments to determine stop levels. Customize the sensitivity of the trailing stop by adjusting the ATR Length (default is 14) and ATR Multiplier (default is 0.5). A longer ATR length smooths out volatility, while a higher multiplier increases the distance of the stop from the price. Select your Source Vector from "High/Low," "Close," or "Open" prices as the basis for stop calculation. This flexibility allows you to align the indicator with your preferred trading strategy. The indicator plots trailing stops directly on the chart, with color-coded lines indicating long (teal) and short (red) positions. You can adjust the line thickness and transparency for optimal visibility. The Mission Status feature automatically detects whether the trade is long or short and adjusts the trailing stop accordingly. If the price hits the trailing stop, the trade is considered exited, and the indicator calculates the profit or loss percentage. Benefits: Risk Management: Protect your trades from adverse market movements while locking in profits as prices move favorably. Automation: Reduce manual intervention with automatic stop adjustments, allowing you to focus on strategic decision-making. User-Friendly Interface: Intuitive settings and clear visual cues make it easy to integrate into your existing trading workflow. Conclusion: Trailing Stop Pro is an essential tool for traders looking to enhance their risk management strategies with precision and ease. By automating the trailing stop process and providing clear visual feedback, this indicator empowers you to navigate the markets with confidence. Whether you're a seasoned trader or just starting, Trailing Stop Pro offers the functionality and flexibility needed to optimize your trading performance. The Trailing Stop Pro indicator is a tool designed to assist traders in managing risk and optimizing their trading strategies. However, it should not be considered as financial advice or a guarantee of profitability. Trading involves significant risk, and it is possible to lose more than your initial investment. Users are encouraged to thoroughly test the indicator in a demo environment and consider their own financial situation and risk tolerance before using it in live trading. Past performance is not indicative of future results, and users should seek advice from a qualified financial advisor if needed.
Wskaźnik Pine Script®
od Julien_Eche
3
Fibonacci-Only StrategyFibonacci-Only Strategy This script is a custom trading strategy designed for traders who leverage Fibonacci retracement levels to identify potential trade entries and exits. The strategy is versatile, allowing users to trade across multiple timeframes, with built-in options for dynamic stop loss, trailing stops, and take profit levels. Key Features: Custom Fibonacci Levels: This strategy calculates three specific Fibonacci retracement levels: 19%, 82.56%, and the reverse 19% level. These levels are used to identify potential areas of support and resistance where price reversals or breaks might occur. The Fibonacci levels are calculated based on the highest and lowest prices within a 100-bar period, making them dynamic and responsive to recent market conditions. Dynamic Entry Conditions: Touch Entry: The script enters long or short positions when the price touches specific Fibonacci levels and confirms the move with a bullish (for long) or bearish (for short) candle. Break Entry (Optional): If the "Use Break Strategy" option is enabled, the script can also enter positions when the price breaks through Fibonacci levels, providing more aggressive entry opportunities. Stop Loss Management: The script offers flexible stop loss settings. Users can choose between a fixed percentage stop loss or an ATR-based stop loss, which adjusts based on market volatility. The ATR (Average True Range) stop loss is multiplied by a user-defined factor, allowing for tailored risk management based on market conditions. Trailing Stop Mechanism: The script includes an optional trailing stop feature, which adjusts the stop loss level as the market moves in favor of the trade. This helps lock in profits while allowing the trade to run if the trend continues. The trailing stop is calculated as a percentage of the difference between the entry price and the current market price. Multiple Take Profit Levels: The strategy calculates seven take profit levels, each at incremental percentages above (for long trades) or below (for short trades) the entry price. This allows for gradual profit-taking as the market moves in the trade's favor. Each take profit level can be customized in terms of the percentage of the position to be closed, providing precise control over exit strategies. Strategy Backtesting and Results: Realistic Backtesting: The script has been backtested with realistic account sizes, commission rates, and slippage settings to ensure that the results are applicable to actual trading scenarios. The backtesting covers various timeframes and markets to ensure the strategy's robustness across different trading environments. Default Settings: The script is published with default settings that have been optimized for general use. These settings include a 15-minute timeframe, a 1.0% stop loss, a 2.0 ATR multiplier for stop loss, and a 1.5% trailing stop. Users can adjust these settings to better fit their specific trading style or the market they are trading. How It Works: Long Entry Conditions: The strategy enters a long position when the price touches the 19% Fibonacci level (from high to low) or the reverse 19% level (from low to high) and confirms the move with a bullish candle. If the "Use Break Strategy" option is enabled, the script will also enter a long position when the price breaks below the 19% Fibonacci level and then moves back up, confirming the break with a bullish candle. Short Entry Conditions: The strategy enters a short position when the price touches the 82.56% Fibonacci level and confirms the move with a bearish candle. If the "Use Break Strategy" option is enabled, the script will also enter a short position when the price breaks above the 82.56% Fibonacci level and then moves back down, confirming the break with a bearish candle. Stop Loss and Take Profit Logic: The stop loss for each trade is calculated based on the selected method (fixed percentage or ATR-based). The strategy then manages the trade by either trailing the stop or taking profit at predefined levels. The take profit levels are set at increments of 0.5% above or below the entry price, depending on whether the position is long or short. The script gradually exits the trade as these levels are hit, securing profits while minimizing risk. Usage: For Fibonacci Traders: This script is ideal for traders who rely on Fibonacci retracement levels to find potential trade entries and exits. The script automates the process, allowing traders to focus on market analysis and decision-making. For Trend and Swing Traders: The strategy's flexibility in handling both touch and break entries makes it suitable for trend-following and swing trading strategies. The multiple take profit levels allow traders to capture profits in trending markets while managing risk. Important Notes: Originality: This script uniquely combines Fibonacci retracement levels with dynamic stop loss management and multiple take profit levels. It is not just a combination of existing indicators but a thoughtful integration designed to enhance trading performance. Disclaimer: Trading involves risk, and it is crucial to test this script in a demo account or through backtesting before applying it to live trading. Users should ensure that the settings align with their individual risk tolerance and trading strategy.
Strategia Pine Script®
od Kinji213
3
Custom ATR Trailing StopThis Script creates a custom ATR (Average True Range) trailing stop. It allows traders to set up automated stop-loss levels based on the ATR, which adjusts dynamically to market volatility. The script is designed to support both long and short trades, offering flexibility and precision in trade management. When loading the indicator to your chart, simply click to set the trade begining time, confirm various settings and you are set. Check tooltips for more details in the input settigns menu. User Inputs Trade Setup: Allows users to set the trade direction (Long or Short), the signal source for entries, and the specific bar time for the trade setup. ATR Settings: Configurable ATR lookback period, ATR smoothing period, initial ATR multiplier for setting the stop-loss, breakeven ATR multiplier, and a manual breakeven level. ATR Calculations Computes the ATR and its moving average. Determines initial and breakeven stop levels based on the ATR. Signal Validation Validates long or short trade signals based on the specified bar time and trade direction. Triggers alerts when a valid trade signal is detected. Trailing Stop Logic For long trades, adjusts the stop-loss level dynamically based on the ATR. For short trades, performs similar adjustments in the opposite direction. Updates the trailing stop level to ensure it follows the price, moving closer as the price moves favorably. Resets the trade state when the stop-loss is hit, triggering an alert. Plotting Plots the trailing stop levels on the chart. Uses green for stop levels indicating profit and red for stop levels indicating a loss.
Wskaźnik Pine Script®
od LucasVivien
Parabolic SAR Waves [MMA]Parabolic SAR Waves Description: The "Parabolic SAR Waves " is an advanced version of the traditional Parabolic SAR indicator, customized for TradingView. This script incorporates dynamic acceleration factors and optional gradient coloration to enhance visual interpretation and utility for traders aiming to accurately capture trends and predict potential reversals. Features: - Dynamic Acceleration: Adjust the initial, incremental, and maximum values of the acceleration factor to suit various market conditions and trading preferences. - Gradient Coloring: Use gradient colors to indicate the strength and stability of the trend, providing visual cues that are easy to interpret. - Trend Visibility: The SAR dots are plotted directly on the price chart, making it easy to spot trend changes and maintain situational awareness. - Overlay Feature: Designed to overlay directly on the price charts, allowing for seamless integration with other technical analysis tools. Benefits: - Trend Detection: Helps in identifying the beginning and potential reversal of trends, aiding in timely decision-making. - Stop-Loss Management: Utilizes the positions of the SAR dots as dynamic stop-loss points, which helps in risk management. - Visual Simplicity: Enhances the decision-making process through a straightforward visual representation of trend data. Parameters: - Acceleration Start (accel_start): The initial value for the acceleration, set to 0.02 by default. - Acceleration Increment (accel_inc): The amount by which the acceleration increases, set to 0.005 by default. - Acceleration Maximum (accel_max): The maximum limit of the acceleration factor, set to 0.1 by default. - Use Gradient Colors (use_gradient): A boolean toggle to enable or disable gradient coloring, enabled by default. Indicator Usage: 1. To apply, select this indicator from TradingView's indicator library. 2. Adjust the acceleration parameters based on your specific trading strategy and market analysis. 3. Interpret the indicator signals: - Green SAR dots below the price bars indicate a bullish trend. - Red SAR dots above the price bars signify a bearish trend. - Gradient colors, if enabled, provide insights into the acceleration factor's intensity relative to trend strength. Alerts: - Bullish Reversal Alert: Issues a notification if there is a potential upward reversal when the trend shifts to bullish. - Bearish Reversal Alert: Alerts when there's potential for a downward move as the trend turns bearish. The "Parabolic SAR Waves " is a robust tool, ideal for traders who need precise, customizable trend-following capabilities that integrate seamlessly with other market analysis strategies. Enhance your trading with detailed trend insights and adaptive parameter controls.
Wskaźnik Pine Script®
od trade-wzrd
3
Sublime Trading | Trailing StoplossWhat kind of traders/investors are we? We are trend followers. Our scripts are designed to be used on the higher timeframes (weekly/daily) to catch the large moves/trends in the market. Most have heard of long-term trend following. Few know how to execute the strategy. Our scripts are designed specifically to identify and invest in long-term market trends. What does this script do? The exit from a position is arguably more important than the entry. Traders/Investors will regularly find themselves in an asset based on some logic, but the exit management is very much an afterthought. Hence why traders often take profit too early and hold onto losing positions. It is emotionally driven. The Trailing Stoploss script is designed to remove the guesswork and show you precise levels you will want to consider exiting a position when an asset reverses. How is the trailing stoploss produced? The script uses the formula ATR 15 x 4. We use ATR as it produces a stoploss which is unique to the volatility of the asset. The more volatile the asset, the wider the stoploss. We use ATR 15 as it brings an average reading across half a month, incorporating days of extreme volatility. The multiplier 4 works well to avoid positions being stopped out prematurely on pullbacks. When the trailing stoploss is hit, this is where you will want to consider taking profit. What is the best timeframe to use the script? We recommend the daily timeframe as this is where trend followers enter assets to maximise the potential of long-term trends. The higher timeframes are where traders and investors take fewer positions and hold for longer time periods. The trailing stoploss follows the price of the asset a distance away to give the trend structure enough space and time to develop. A trend is ultimately a function of time. If you eliminate time, you eliminate the trend. If you eliminate the trend, you eliminate profit. The Trailing Stoploss script is necessary for investors who appreciate that profit is accumulated by letting winning positions run and not taking profit too early. What makes this script unique? Exit management and knowing when to let go of an asset is one of the main struggles budding investors face. This script has been coded specifically for the daily timeframe to: Create a trailing stoploss that is unique to the volatility of the asset. Allow investors to stay in positions for the duration of the trend over many months. To distinguish between a pullback and a market reversal, allowing for discretion. This TSL script is designed to manage positions investors take in line with long-term market trends.
Wskaźnik Pine Script®
od Sublime_Trading
Spinn: SuperStopAdaptive Trailing Stop-Loss Indicator This indicator will be beneficial for traders who have already opened a position and are looking to maximize their profits but are uncertain about the optimal time to exit. It provides clear and adaptive stop-loss levels based on market data, especially in highly volatile markets. It offers the ability to close trades automatically (through the use of web-hooks). The algorithm is based on using the Average True Range (ATR) to set stop-loss levels. The scaling factor allows you to adjust the optimal distance from the stop-loss line to the price line. A unique feature of this indicator is that the user can set the target timeframe (Target TF). This means that instead of just using the current chart's timeframe, you can set a multiplier or choose the target timeframe manually. This offers the ability to analyze volatility across different timeframes, which can be valuable for various trading strategies. The timeframe multiplier is a highlight of this indicator. When switching the current timeframe, there is no need to manually change the target timeframe - this is very convenient. The ability for automatic alerts when the price touches or crosses stop-loss levels is included. -- Индикатор адаптивных плавающих Стоп-лоссов Индикатор будет полезен для трейдеров, которые уже открыли сделку и хотят максимизировать свою прибыль, но не уверены в оптимальном моменте для выхода. Он предоставляет четкие и адаптивные уровни стоп-лоссов, основанные на рыночных данных, особенно при высокой волатильности. Дает возможность закрывать сделки в автоматическом режиме (через использование веб-хуков). Алгоритм основан на использовании среднего истинного диапазона (ATR) для определения уровней стоп-лоссов. Коэффициент масштабирования дает возможность настроить оптимальное расстояние от линии стоп-лосса до линии цены. Особенность индикатора в том, что пользователь может настроить целевой таймфрейм (Target TF). Это значит, что вместо того чтобы просто использовать текущий таймфрейм графика, можно установить множитель или выбрать целевой таймфрейм вручную. Это дает возможность анализировать волатильность на разных временных рамках, что может быть полезно для различных торговых стратегий. Множитель таймфрейма - это фишка данного индикатора. При переключении текущего таймфрейма не придется вручную менять целевой таймфрейм - это очень удобно. Предусмотрена возможность автоматических оповещений при касании или пересечении уровней стоп-лоссов.
Wskaźnik Pine Script®
od Spinn29
Pure Morning 2.0 - Candlestick Pattern Doji StrategyThe new "Pure Morning 2.0 - Candlestick Pattern Doji Strategy" is a trend-following, intraday cryptocurrency trading system authored by devil_machine. The system identifies Doji and Morning Doji Star candlestick formations above the EMA60 as entry points for long trades. For best results we recommend to use on 15-minute, 30-minute, or 1-hour timeframes, and are ideal for high-volatility markets. The strategy also utilizes a profit target or trailing stop for exits, with stop loss set at the lowest low of the last 100 candles. The strategy's configuration details, such as Doji tolerance, and exit configurations are adjustable. In this new version 2.0, we've incorporated a new selectable filter. Since the stop loss is set at the lowest low, this filter ensures that this value isn't too far from the entry price, thereby optimizing the Risk-Reward ratio. In the specific case of ALPINE, a 9% Take-Profit and and Stop-Loss at Lowest Low of the last 100 candles were set, with an activated trailing-stop percentage, Max Loss Filter is not active. Name : Pure Morning 2.0 - Candlestick Pattern Doji Strategy Author : @devil_machine Category : Trend Follower based on candlestick patterns. Operating mode : Spot or Futures (only long). Trades duration : Intraday Timeframe : 15m, 30m, 1H Market : Crypto Suggested usage : Short-term trading, when the market is in trend and it is showing high volatility . Entry : When a Doji or Morning Doji Star formation occurs above the EMA60. Exit : Profit target or Trailing stop, Stop loss on the lowest low of the last 100 candles. Configuration : - Doji Settings (tolerances) for Entry Condition - Max Loss Filter (Lowest Low filter) - Exit Long configuration - Trailing stop Backtesting : ⁃ Exchange: BINANCE ⁃ Pair: ALPINEUSDT ⁃ Timeframe: 30m ⁃ Fee: 0.075% ⁃ Slippage: 1 - Initial Capital: 10000 USDT - Position sizing: 10% of Equity - Start: 2022-02-28 (Out Of Sample from 2022-12-23) - Bar magnifier: on Disclaimer : Risk Management is crucial, so adjust stop loss to your comfort level. A tight stop loss can help minimise potential losses. Use at your own risk. How you or we can improve? Source code is open so share your ideas! Leave a comment and smash the boost button! Thanks for your attention, happy to support the TradingView community.
Strategia Pine Script®
od TheSocialCryptoClub
6