Rozpocznij

Cykle

ABS Companion Oscillator — Trend / Exhaustion / New Trend (v1.1) # ABS Companion Oscillator — Trend / Exhaustion / New Trend (v1.1) ## What it is (quick take) **ABS CO** is a unified **–100…+100 trend oscillator** that fuses: * **Regime**: EMA stack (fast/slow/long) + **HTF slope** (e.g., 60-minute) * **Momentum**: **TSI** vs its signal * **Stretch**: session-anchored **VWAP Z-score** for exhaustion and “fresh-trend” sanity checks It paints the oscillator with **lime** in upstate, **red** in downstate, **gray** in neutral, and tags: * **NEW↑ / NEW↓** when a **new trend** likely starts (zero-line cross with acceptable stretch) * **EXH↑ / EXH↓** when an **existing trend looks exhausted** (large |Z| + momentum rollback) > Use it as a **direction filter and context layer**. Works great in front of an entry engine and behind an exit tool. --- ## How to use it (operational workflow) 1. **Read the state** * **Uptrend** when the oscillator is **≥ upThresh** (default +55) → prefer **long-side** plays. * **Downtrend** when the oscillator is **≤ dnThresh** (default −55) → prefer **short-side** plays. * **Neutral** between thresholds → be selective or flat; expect chop. 2. **Act on events** * **NEW↑ / NEW↓**: zero-line cross with acceptable |Z| (not already overstretched). Treat as **trend start** cues. * **EXH↑ / EXH↓**: trend state with **high |Z|** and TSI rollback versus its signal. Treat as **trend fatigue**; avoid fresh go-with entries and tighten risk. 3. **Practical pairing** * Use **up/down state** (or above/below **neutralBand**) as your go/no-go filter for entries. * Prioritize entries **with** NEW↑/NEW↓ and **without** nearby EXH tags. * Keep holding while the oscillator stays in state and no EXH appears; consider scaling out on EXH or on your exit tool. --- ## Visual semantics & alerts * **ABS CO line** (–100…+100): lime in upstate, red in downstate, gray in neutral. * **Horizontal guides**: `Up` threshold, `Down` threshold, `Zero`, and optional **neutral band** lines. * **Background heat** (optional): shaded when EXH conditions trigger (lime/red tint with intensity scaled by |Z|). * **Tags**: `NEW↑`, `NEW↓`, `EXH↑`, `EXH↓`. **Alerts (stable):** * **ABS CO — New Uptrend** (NEW↑) * **ABS CO — New Downtrend** (NEW↓) * **ABS CO — Exhausted Up** (EXH↑) * **ABS CO — Exhausted Down** (EXH↓) Set alerts to **“Once per bar close”** for clean signals. --- ## Non-repainting behavior * HTF queries use **lookahead\_off**. * With **Strict NR = true**, the HTF slope is taken from the **prior completed** HTF bar; events evaluate on confirmed bars → **safer, fewer, cleaner**. * NEW/EXH tags finalize at bar close. Disabling strictness yields earlier but noisier responses. --- ## Every input explained (and how it changes behavior) ### A) Trend & HTF structure * **EMA Fast / Slow / Long (`emaFastLen`, `emaSlowLen`, `emaLongLen`)** Control the baseline regime. Larger = smoother, fewer flips; smaller = snappier, more flips. * **HTF EMA Len (`htfLen`)** & **HTF timeframe (`htfTF`)** HTF slope filter. Longer len or higher TF = steadier bias (fewer state changes); shorter/ lower = more sensitive. * **Strict NR (`strictNR`)** `true` uses the **previous** HTF bar for slope and evaluates on confirmed bars → cleaner, slower. ### B) Momentum (TSI) * **TSI Long / Short / Signal (`tsiLong`, `tsiShort`, `tsiSig`)** Standard TSI. Larger values = smoother momentum, fewer EXH triggers; smaller = snappier, more EXH sensitivity. ### C) Stretch (VWAP Z-score) * **VWAP Z-score length (`zLen`)** Window for Z over session-anchored VWAP distance. Larger = smoother |Z|; smaller = more reactive stretch detection. * **Exhaustion |Z| (`zHot`)** Minimum |Z| to flag **EXH**. Raise to demand **bigger** stretch (fewer EXH); lower to catch milder excess. * **Max |Z| for NEW (`zNewMax`)** NEW requires |Z| **≤ zNewMax** (avoid “new trend” when already stretched). Lower = stricter; higher = more NEW tags. ### D) States & thresholds * **Uptrend threshold (`upThresh`)** / **Downtrend threshold (`dnThresh`)** Where the oscillator flips into trend states. Widen (e.g., +60/−60) to reduce false states; narrow to get earlier signals. * **Neutral band (`neutralBand`)** Visual buffer around zero for “meh” momentum. Larger band = fewer go/no-go flips near zero. ### E) Visuals & tags * **Show New / Show Exhausted (`showNew`, `showExh`)** Toggle the tag labels. * **Shade exhaustion heat (`plotHeat`)** On = color background when EXH fires. Helpful for scanning. ### F) Smoothing * **Osc smoothing (`smoothLen`)** EMA over the raw composite. Higher = steadier line (fewer whip flips); lower = faster turns. --- ## Tuning recipes * **Trend-day bias (follow moves longer)** * Raise **`upThresh`** to \~60 and **`dnThresh`** to \~−60 * Keep **`zNewMax`** low (1.0–1.2) to avoid “fresh trend” when stretched * **`smoothLen`** 3–5 to reduce noise * **Range-day bias (fade edges)** * Keep thresholds closer (e.g., +50/−50) for quicker state changes * Lower **`zHot`** slightly (1.6–1.7) to catch earlier exhaustion * Consider slightly shorter TSI (e.g., 21/9/5) for faster EXH response * **Scalping LTF (1–3m)** * TSI 21/9/5, **`smoothLen`** 1–2 * Thresholds +/-50; **`zNewMax`** 1.0–1.2; **`zHot`** 1.6–1.8 * StrictNR **off** if you want earlier calls (accept more noise) * **Swing / HTF (1h–D)** * TSI 35/21/9, **`smoothLen`** 4–7 * Thresholds +/-60\~65; **`zNewMax`** 1.2; **`zHot`** 1.8–2.0 * StrictNR **on** for cleaner bias --- ## Playbooks (how to actually trade it) * **Go/No-Go Filter** * Only take **long entries** when the oscillator is **above the neutral band** (preferably ≥ `upThresh`). * Only take **short entries** when **below** the neutral band (preferably ≤ `dnThresh`). * Avoid fresh go-with entries if an **EXH** tag appears; let the next setup re-arm. * **Trend Genesis** * Treat **NEW↑ / NEW↓** as “green light” for **first pullback** entries in the new direction (ideally within acceptable |Z|). * **Trend Maturity** * When in a position and **EXH** prints **against** you, tighten stops, take partials, or lean on your exit tool to protect gains. --- ## Suggested starting points * **Day trading (5–15m):** * TSI 25/13/7, `smoothLen=3`, thresholds **+55 / −55**, `zNewMax = 1.2`, `zHot = 1.8`, **StrictNR = true** * **Scalping (1–3m):** * TSI 21/9/5, `smoothLen=1–2`, thresholds **+50 / −50**, `zNewMax = 1.1–1.2`, `zHot = 1.6–1.8`, **StrictNR = false** (optional) * **Swing (1h–D):** * TSI 35/21/9, `smoothLen=4–6`, thresholds **+60 / −60**, `zNewMax = 1.2`, `zHot = 1.9–2.0`, **StrictNR = true** --- ## Notes & best practices * **Session anchoring**: Z-score is session-anchored (resets by trading date). If you trade outside standard sessions, verify your data session. * **Instrument specificity**: Tune **`zHot`**, **`zNewMax`**, and thresholds per symbol and timeframe. * **Bar-close discipline**: Evaluate tags at **bar close** to avoid intrabar flip-flop. * This is a **context/confirmation tool**, not a broker or strategy. Combine with your entry/exit rules and position sizing. --- **Tip:** Start with the suggested day-trading profile. Use this oscillator as your **gate** (only trade with it), let your entry engine time executions, and rely on your exit tool for standardized profit-taking.
Wskaźnik Pine Script®
od jensenvilhelm
Fibs Has Lied 🌟 Fibs Has Lied - Indicator Overview 🌟 Designed for indices like US30, NQ, and SPX, this indicator highlights setups where price interacts with key EMA levels during specific trading sessions (default: 6:30–11:30 AM EST). 🌟 Key Features & Levels 🌟 🔹EMA Crossover Setups The indicator uses the 100-period and 200-period EMAs to identify bullish and bearish setups: - Bullish Setup: Triggers when the 100 EMA crosses above the 200 EMA, followed by two consecutive candles opening above the 100 EMA, with the low within a specified point distance (e.g., 20 points for US30). - Bearish Setup: Triggers when the 100 EMA crosses below the 200 EMA, followed by two consecutive candles opening below the 100 EMA, with the high within the point distance. - Signals are marked with green (buy) or red (sell) triangles and text, ensuring you don’t miss a setup. 📈 🔹 Reset Conditions for Re-Entries After an initial setup, the indicator watches for “reset” opportunities: - Buy Reset: If price moves below the 200 EMA after a bullish crossover, then returns with two consecutive candles where lows are above the 100 EMA (within point distance), a new buy signal is plotted. - Sell Reset: If price moves above the 200 EMA after a bearish crossover, then returns with two consecutive candles where highs are below the 100 EMA (within point distance), a new sell signal is plotted. This feature captures additional entries after liquidity grabs or fakeouts, aligning with ICT’s manipulation concepts. 🔄 🔹 Session-Based Filtering Focus your trades during high-liquidity windows! The default session (6:30–11:30 AM EST, New York timezone) targets the London/NY overlap, where price often seeks liquidity or sets up for reversals. Toggle the time filter off for 24/7 signals if desired. 🕒 🔹Symbol-Specific Point Distance Customizable entry zones based on your chosen index: - US30: 20 points from the 100 EMA. - NQ: 3 points from the 100 EMA. - SPX: 2.5 points from the 100 EMA. This ensures setups are tailored to the volatility of your market, maximizing relevance. 🎯 🔹 Market Structure Markers (Optional) Visualize swing points with pivot-based labels: - HH (Higher High): Signals uptrend continuation. - HL (Higher Low): Indicates potential bullish support. - LH (Lower High): Suggests weakening uptrend or reversal. - LL (Lower Low): Points to downtrend continuation. - Toggle these on/off to keep your chart clean while analyzing trend direction. 📊 🔹 EMA Visualization Optionally plot the 100 EMA (blue) and 200 EMA (red) to see key levels where price reacts. These act as dynamic support/resistance, perfect for spotting liquidity pools or ICT’s Power of 3 setups. ⚖️ 🌟 Customization Options 🌟 - Symbol Selection: Choose US30, NQ, or SPX to adjust point distance for entries. - Time Filter: Enable/disable the 6:30–11:30 AM EST session to focus on high-liquidity periods. - EMA Display: Toggle 100/200 EMAs on/off to reduce chart clutter. - Market Structure: Show/hide HH/HL/LH/LL labels for cleaner analysis. - Signal Markers: Green (buy) and red (sell) triangles with text are auto-plotted for easy identification. 🌟 Usage Tips 🌟 - Best Timeframes: Use on 3m for intraday scalping and 30m for swing trades. - Combine with ICT Tools: Pair with order blocks, fair value gaps, or kill zones for stronger setups. - Focus on Session: The default 6:30–11:30 AM EST session captures London/NY volatility—perfect for liquidity-driven moves. - Avoid Overcrowding: Disable market structure or EMAs if you only want setup signals.
Wskaźnik Pine Script®
od DeadCatCode
Spice • Micro Suite (T/r & B/r)What it is A single Pine v5 indicator that stacks: EMA ribbon + a “special” EMA (11 vs 34) line that flips color on trend. MTF-RSI “pressure” check with simple up/down arrows. Bollinger-Band re-entry system with Top/Bottom triggers (T/B) and confirmations (r) in the next N bars. Classic candlestick add-ons: 3-Line Strike and Leledc exhaustion dots. Your Micro Dots engine (ATR-based regime + Variable Moving Average filter) + an optional VMA trend line. Alerts for all the above. Key signals (what prints on the chart) EMAs (20/50/100/200): plotted faintly; EMA-34 is drawn and colored by the 11>34 trend. RSI arrows Checks RSI(6) on the current TF and (optionally) 5m/15m/30m/1h/4h/1D. Down arrow: current RSI > 70 and the selected higher TF RSIs are also > 70 (pressure cluster just cooled; barssince(redZone)<2). Up arrow: current RSI < 30 and selected higher TFs also < 30 (barssince(greenZone)<2). Bollinger Reversals (your update) T (Top trigger): first close back inside the upper BB (crossunder(close, upper)). B (Bottom trigger): first close back inside the lower BB (crossover(close, lower)). r (Confirm): within the next confirmBars bars (input), price also closes below the T-bar’s low → top r above bar closes above the B-bar’s high → bottom r below bar Bar tinting Only the T/B trigger bars are tinted (yellow/orange). Everything else stays your normal candle colors (unless you add the optional “trend candles” block I gave you). 3-Line Strike Prints a small green/red circle when the 3-line strike pattern appears (bull/bear). Leledc Exhaustion Calculates a running buy/sell index; prints a small ∘ at major highs/lows when exhaustion conditions hit (major==-1 high, major==1 low). Micro Dots (your second script, merged) ATR “micro supertrend” defines regime (up/down). A fast Variable Moving Average + a simple MA(18) filter. Green dot below bar when: VMA < price, price > MA(18), regime up, and VMA not pointing down. Red dot above bar for the bearish mirror. Separate VMA trend line (length = Fast/Med/Slow) that colors green/red/orange by slope. Inputs you’ll care about Top/Bot Reversal → confirmBars (how many bars you allow to confirm the T/B trigger). RSI Timeframes → toggle which HTFs must agree with the OB/OS condition. EMAs → show/hide and lengths. BB → show/hide basis/bands (used for T/B even if hidden). Micro → show dots, show VMA line, choose intensity (Fast/Med/Slow). Alerts Prebuilt alerts for: RSI Up/Down, T/B triggers, T/B confirmations, 3-Line Strike bull/bear, Leledc highs/lows, EMA crosses (20/50/100/200), the special 11/34 trend change, Micro Dots, and VMA price cross. (Alert messages are const strings so they compile cleanly.) How to read clusters (quick playbook) Reversal short: see T on/near upper band → get an r within your window → bonus confidence if an RSI down arrow or Leledc ∘ high shows up around the same time. Reversal long: mirror with B then r, plus RSI up arrow / Leledc ∘ low. Continuation: ignore lone T/B if Micro Dot stays green (or red) and EMA-11 > EMA-34 remains true. Why your candles look “normal” By design, the script only colors bars on T or B trigger bars. If you want always-on trend candles, use the small block I gave you to color by EMA(20/50) (or any rule you like) and let T/B override on trigger bars.
Wskaźnik Pine Script®
od BigeMarket
CTA-min D1 — Donchian 55/20 Trend Breakout (ATR Risk)What it is A clean, daily trend-following breakout inspired by classic CTA/Turtle logic. It buys strength and sells weakness, then lets winners run with a channel-based trailing stop. No curve-fitting, no clutter—just rules. How it trades Timeframe: Daily (D1) Entry: Close breaks the previous 55-bar Donchian channel (above for longs, below for shorts). Exit/Trail: Trailing stop at the 20-bar Donchian channel on the opposite side (no fixed TP). Risk: Initial stop = ATR(N) × stopMult (ATR is smoothed). Position size risks riskPct% of equity based on stop distance. Labels: “BUY/SELL” only on the entry bar; “STOP BUY/STOP SELL” only on the exit bar. Pyramiding: Off (one position at a time). Regime Alignment with EMAs (recommended filter, not enforced by code) Add EMA 50 and EMA 200 to the D1 chart. Long bias: take BUY signals only when EMA50 > EMA200 (bullish regime). Short bias: take SELL signals only when EMA50 < EMA200 (bearish regime). Optional: for extra selectivity, require the H4 EMAs (50/200) to align with D1 before acting on a signal. Inputs entryN (55), exitN (20), atrLen (20), atrSmooth (10), stopMult (2.0), riskPct (0.5%–1.0% recommended). Works well on (tested by user) BTCUSD (Bitcoin), EURUSD, GBPJPY, NAS100/US100, USDJPY, AUDUSD, XAGUSD (Silver), US30 (Dow), JP225 (Nikkei), EURGBP, NZDUSD, EURCHF, USDCHF. How to use Apply to D1 charts. Review once per day after the daily close and execute next session open to mirror backtest assumptions. Best used as a portfolio strategy across multiple uncorrelated markets. Use the EMA alignment above as a discretionary regime filter to reduce false breakouts. Notes For educational use. Markets involve risk; past performance does not guarantee future results. Use responsible position sizing.
Wskaźnik Pine Script®
od fausto-soldatelli
Enhanced 4H Candle Countdown & High/Low IndicatorBy profitgang This Pine Script indicator provides real-time tracking of 4-hour timeframe levels with an integrated countdown timer, designed to help traders monitor key support and resistance zones. Key Features 📊 Visual Elements 4H High/Low Lines: Clear visualization of previous 4-hour candle high and low levels Range Fill: Subtle background fill between high and low for better context Mid-Level Line: Shows the middle point of the 4H range Position Indicator: Visual cue showing current price position within the range ⏰ Countdown Timer Real-time countdown to next 4H candle close Customizable table position (9 different locations) Adjustable text size (6 size options from Tiny to Huge) Distance calculations showing percentage distance from key levels 🎯 Signal Generation Long signals when price crosses above 4H low Short signals when price crosses below 4H high RSI confluence filter to reduce false signals Background highlighting for active signals TradingView alerts compatible ⚙️ Customization Options Toggle all features on/off independently Custom colors for all elements Table positioning (top/middle/bottom + left/center/right) Text size selection for optimal readability Alert notifications for level breaks and updates How It Works The indicator fetches the previous 4-hour candle's high and low values and displays them as horizontal lines on your current timeframe chart. It continuously calculates the time remaining until the current 4H candle closes and presents this information in a clean, customizable table. Use Cases Swing Trading: Identify key 4H support and resistance levels Intraday Trading: Monitor when new 4H levels will be established Risk Management: Calculate distance from key levels for position sizing Multi-timeframe Analysis: Combine with lower timeframe setups Educational Purpose This indicator is designed for educational and analytical purposes to help traders understand price action relative to higher timeframe levels. It provides clear visual feedback about market structure and timing. Settings Groups Display Settings: Toggle features, positioning, and sizing Colors: Customize all visual elements Signal Settings: Configure alert conditions and confluence filters Compatibility Works on all timeframes (recommended for 1m to 1H charts) Compatible with all instruments Includes proper alert functionality for automated notifications Optimized for both light and dark themes This indicator does not provide financial advice. Always conduct your own research and risk management before making trading decisions.
Wskaźnik Pine Script®
od profitgang
Buy/Sell Setup counter to 9For a buy setup: Any candle whose closing price is lower than the closing price four candles earlier. For a sell setup: Any candle whose closing price is higher than the closing price four candles earlier. The count starts at 1 as soon as a candle meets the condition and is increased by 1 for each additional matching candle. Interruption: If a candle does not meet the condition, the counter is reset to 0 and restarts at the next matching signal. A maximum of 9 is counted – this is the end of the setup. In the chart, this number is displayed above (for sell) or below (for buy) the respective candle.
Wskaźnik Pine Script®
od FadeToTrade
Recovery Zone Hedging [Starbots]Recovery Zone Hedging Strategy — Advanced Adaptive Hedge Recovery System This strategy introduces an innovative zone-based hedge recovery approach tailored to TradingView’s single-direction trading model. Designed for serious traders and professionals, it combines multiple technical indicators with dynamic position sizing and adaptive take-profit mechanisms to manage drawdowns and maximize recovery efficiency. How Recovery Zones Are Calculated The strategy defines recovery zones as a configurable percentage distance from the last executed trade price. This percentage can be adjusted to suit different market volatility environments — wider zones for volatile assets, tighter zones for stable ones. When price moves into a recovery zone against the open position, the strategy places a hedge trade in the opposite direction to help recoup losses. Dynamic Take-Profit Calculation Take-profit targets are not fixed. Instead, they increase dynamically based on any accumulated losses from previous hedge trades. For example, if your initial target is 2%, but you have a $5 loss from prior hedges, the next take-profit target adjusts upward to cover both the loss and your profit goal, ensuring the entire hedge sequence closes in net profit. Originality & Value Unlike traditional hedging or recovery scripts that rely on static stop losses and fixed trade sizing, this strategy offers: - Dynamic Hedge Entry Zones: Uses configurable percentage-based recovery zones that adapt to price volatility, allowing precise placement of hedge trades at meaningful reversal levels. - Multi-Indicator Signal Fusion: Integrates MACD and Directional Movement Index (DMI) signals to confirm trade entries, improving signal accuracy and reducing false triggers. - Exponential Position Sizing: Each hedge trade’s size grows exponentially using a customizable multiplier, accelerating loss recovery while carefully balancing capital usage. - Adaptive Take-Profit Logic: The take-profit target adjusts dynamically based on accumulated losses and profit margins, ensuring that the entire hedge sequence closes with a net gain. - Capital Usage Monitoring: A built-in dashboard tracks real-time equity consumption, preventing over-leveraging by highlighting critical capital thresholds. - Fail-Safe Exit Mechanism: An optional forced exit beyond the last hedge zone protects capital in extreme market scenarios. This strategy’s layered design and adaptive mechanisms provide a unique and powerful tool for traders seeking robust recovery systems beyond standard hedge or martingale methods. How Components Work Together - Entry Signals: The script listens for MACD line crossovers and DMI directional crosses to open an initial trade. - Recovery Zones: If the market moves against the initial position, the strategy calculates a recovery zone a set percentage away and places a hedge trade in the opposite direction. - Position Scaling: Each subsequent hedge trade increases in size exponentially according to the hedge multiplier, designed to recover all previous losses plus a profit. - Take-Profit Target: Rather than a fixed target, the TP level is dynamically calculated considering current drawdown and desired profit margin, ensuring the entire hedge sequence closes profitably. - Cycle Management: Trades alternate direction following the recovery zones until profit is realized or a maximum hedge count is reached. If needed, a forced stop-out limits risk exposure. Key Benefits for Professional Traders - Enhanced Risk Management: Real-time capital usage visualization helps maintain safe exposure levels. - Strategic Hedge Recovery: The adaptive recovery zones and exponential sizing accelerate loss recoupment more efficiently than traditional fixed-step systems. - Multi-Indicator Confirmation: Combining MACD and DMI reduces false signals and improves hedge timing accuracy. - Versatility: Suitable for multiple timeframes and asset classes with adjustable parameters. - Comprehensive Visuals: On-chart recovery zones, hedge levels, dynamic take-profits, and equity usage tables enable informed decision-making. Recommended Settings & Use Cases - Initial Position Size: 0.1–1% of account equity - Recovery Zone Distance: 2–5% price movement - Hedge Multiplier: 1.5–1.85x growth per hedge step - Max Hedge Steps: 5–10 for controlled risk exposure Ideal for trending markets where price retracements create viable recovery opportunities. Use caution in sideways markets to avoid extended hedge sequences. Important Notes - TradingView’s single-direction model means hedging is simulated via alternating trades. - Position sizes grow rapidly—proper parameter tuning is essential to avoid over-leveraging. This script is designed primarily for professional traders seeking an advanced, automated hedge recovery framework, offering superior capital efficiency and loss management.
Strategia Pine Script®
od Starbots
Two Dot Closed 5ma VarianceThe concept behind this indicator is I have worked with a 5 simple moving average for a very long time. More significantly I changed the mode of the ma from a line to a DOT format. While price action moves upward the 5 MA stretches its values between bars, doing the same as it moves down. This becomes so much more obvious in DOT format. It is the turning points of direction where the variance between the DOTS of the 5 MA closes. Flattening the DOTS! I created this indicator for XAUUSD 30 minute chart. Do with as you see fit. The indicator has a function that you can assign a MAX and MIN variance of the 5 MA right down to 0.10 cents. If closing value of 5 MA is within your set amount an ALERT is given. The actual variance is given in the leading flag and is of the prior 2 closed values.
Wskaźnik Pine Script®
od TraderAl1963
zSph x Larry Waves Wave Zone ForecastElliott Waves and Fibonacci Ratio Lengths have a strong correlated relationship when observing the general strength and termination of both Impulse (Motive) Waves and Corrective Waves. There are certain Fibonacci levels that are highly reactive when applying it from a Wave Analysis perspective and being aware of the current wave sequence is required. Often, those beginning their Elliott Wave journey and studies are unsure what Fibonacci levels are relevant and how to apply it to the wave structure that is being observed – this tool removes that ambiguity on placement. Being aware of the predisposed levels that have a high rate of reaction can assist in managing trades from a scalp intra-day approach, a day trading approach, and a swing trading approach. # Concept This tool helps with identifying zones that are relevant to the wave that is currently in progression upon the market and visualize important Fibonacci levels where reactions often occur from an Elliott Wave perspective such as: Wave 2 Wave 3 Wave 4 Wave 5 Wave B Zigzag Wave B Flat Wave X Zigzag Wave X Flat Wave C Wave Y This helps remove almost all the manual labor of updating fib levels, selecting certain fib levels, and manually moving the fib levels as price continues to print while autonomously providing the levels visually. # Correct Usage Wave 3 / Wave C / Wave Y Once a clear impulse/motive structure has been identified for a Wave 1, Wave A or Wave W, apply the indicator to the structure. Anchor 1 is the beginning of the impulse for Wave 1 or A or W. Anchor 2 is the end of the impulse for Wave 1 or A or W. The result is the standard zones for Wave 3, Wave C and Wave Y. BINANCE:LINKUSD Wave 4 Once a clear impulse/motive structure has been identified for Wave 3, apply the indicator to the structure. Anchor 1 is the beginning of Wave 3 (or the end of Wave 2) Anchor 2 is the end of Wave 3 (or the beginning of Wave 4) The result is the standard zone for Wave 4. LINKUSD Wave B / Wave X / Wave C / Wave Y Once a clear 3-wave corrective has been identified for a potential Corrective pattern, apply the indicator to the structure. - Anchor 1 is the end of beginning of Wave A or Wave W - Anchor 2 is the end of Wave A or Wave W The result is the standard zones Waves B / X and Waves C / Y for Zigzags, Flats and Combos. BINANCE:LINKUSD # Settings "Show Labels" will toggle on and off the labels for each fib zone, each fib line, and invalidation ticks that are in the 2/3 – B/C option to help with calculating risk management quickly. "Use Log Scale" will allow you to toggle on/off the log scale for log fibs "Extend Lines" will allow you to extend the fib lines to current price action from the Elliott Wave Zones to see reactions off the fib levels. “Extend Zones” will allow you to extend the overall zone for the fibs to current price action from the Elliott Wave Zones to see reactions off the zone. There is also user customization of color use for the zones/. “Fib Levels” will allow you to customize the lines and colors of the fibs lines. “X-Axis Offset” will increase or decrease the position of the fibs of the zones (not the extension boxes)..
Wskaźnik Pine Script®
od zSph_
Price Opening LevelsThis TradingView indicator by SnipingInTheRange is designed specifically for futures and indices. It plots key market opening prices: - Daily, Weekly, Monthly Opens - SITR Price Open — the 9:30 AM New York session open The SITR Price Open is the core level, marking the exact price when the NYSE opens. It’s labeled clearly and used as a strategic anchor for intraday trades, reflecting institutional momentum and volatility. Customizable features include line styles, colors, label visibility, and offset positioning—giving futures and index traders clean, precise visual cues for high-probability setups.
Wskaźnik Pine Script®
od snipingintherange
Price Tracker/galgoomThis indicator is designed for Renko chart traders who want to combine price action relative to a key line (qLine) with Moneyball buy/sell signals as a confirmation. It helps filter trades so you only get signals when both conditions align within a chosen time window. How It Works First Event – Price Trigger Detects when the Renko close crosses above/below your selected qLine plot from the qPro indicator. You can choose between: Cross – only triggers on an actual crossover/crossunder. State (Close) – triggers whenever price closes above/below qLine. Second Event – Moneyball Confirmation Waits for Moneyball’s Buy Signal (for long) or Bear/Sell Signal (for short) plot to fire. You select the exact Moneyball plot from the source menu. You can specify how the Moneyball signal is interpreted (== 1, >= 1, or any nonzero value). Sequential Logic The Moneyball signal must occur within N Renko bricks after the price event. The final buy/sell signal is printed on the Moneyball bar. Key Features Works natively on Renko charts. Adjustable confirmation window (0–5 bricks). Flexible detection for both qLine and Moneyball signals. Customizable label sizes, arrow display, and alerts. Alerts fire for both buy and sell conditions: BUY: qLine ➜ Moneyball Buy SELL: qLine ➜ Moneyball Sell Inputs qLine Source – Pick the qPro qLine plot. Price Event Type – Cross or State. Moneyball Buy/Sell Signal Plots – Select the correct plots from your Moneyball indicator. Confirmation Window – Bars allowed between events. Visual Settings – Label size, arrow visibility, etc. Use Case Ideal for traders who: Want a double-confirmation entry system. Use Renko charts for cleaner trend detection. Already have qPro and Moneyball loaded, but want an automated, rule-based confluence check. 38 minutes ago Release Notes This indicator is designed for Renko chart traders who want to combine price action relative to a key line (qLine) with Moneyball buy/sell signals as a confirmation. It helps filter trades so you only get signals when both conditions align within a chosen time window. How It Works First Event – Price Trigger Detects when the Renko close crosses above/below your selected qLine plot from the qPro indicator. You can choose between: Cross – only triggers on an actual crossover/crossunder. State (Close) – triggers whenever price closes above/below qLine. Second Event – Moneyball Confirmation Waits for Moneyball’s Buy Signal (for long) or Bear/Sell Signal (for short) plot to fire. You select the exact Moneyball plot from the source menu. You can specify how the Moneyball signal is interpreted (== 1, >= 1, or any nonzero value). Sequential Logic The Moneyball signal must occur within N Renko bricks after the price event. The final buy/sell signal is printed on the Moneyball bar. Key Features Works natively on Renko charts. Adjustable confirmation window (0–5 bricks). Flexible detection for both qLine and Moneyball signals. Customizable label sizes, arrow display, and alerts. Alerts fire for both buy and sell conditions: BUY: qLine ➜ Moneyball Buy SELL: qLine ➜ Moneyball Sell Inputs qLine Source – Pick the qPro qLine plot. Price Event Type – Cross or State. Moneyball Buy/Sell Signal Plots – Select the correct plots from your Moneyball indicator. Confirmation Window – Bars allowed between events. Visual Settings – Label size, arrow visibility, etc. Use Case Ideal for traders who: Want a double-confirmation entry system. Use Renko charts for cleaner trend detection. Already have qPro and Moneyball loaded, but want an automated, rule-based confluence check.
Wskaźnik Pine Script®
od galgoom
Ethereum Logarithmic Regression BandsOverview This indicator displays logarithmic regression bands for Ethereum. Logarithmic regression is a statistical method used to model data where growth slows down over time. I initially created these bands in 2021 using a spreadsheet, and later coded them in TradingView in 2022. Over time, the bands proved effective at capturing bull market peaks and bear market lows. In 2025, I decided to share this indicator because I believe these logarithmic regression bands offer the best fit for the Ethereum chart. How It Works The logarithmic regression lines are fitted to the Ethereum (ETHUSD) chart using two key factors: the 'a' factor (slope) and the 'b' factor (intercept). The formula for logarithmic regression is 10^((a * ln) - b). How to Use the Logarithmic Regression Bands 1. Lower Band: The lower (blue) band forms a potential support area for Ethereum’s price. Historically, Ethereum has found its lows within this band during past market cycles. When the price is within the lower band, it suggests that Ethereum is undervalued. 2. Upper Band: The upper (red) band forms a potential resistance area for Ethereum’s price. The logarithmic band is fitted to the past two market cycle peaks; therefore, there is not enough historical data to be sure it will reach the upper band again. However, the chance is certainly there! If the price is within the upper band, it indicates that Ethereum is overvalued and that a potential price correction may be imminent.
Wskaźnik Pine Script®
od CryptoRiskAlert
JJ Tuesday Expiry Highlighter – SensexHighlights every Tuesday across your chart for quick identification of Indian market weekly expiry days (Sensex expiry = Tuesday). Features: • Works on all timeframes • Customizable highlight color • Optional "Expiry" label on daily charts • Useful for options traders tracking weekly expiry trends Disclaimer: This script is for informational and educational purposes only. It does not constitute financial advice or a recommendation to trade. Please do your own research and consult a licensed financial advisor. Pro Tip: Duplicate this script and change `dayofweek.tuesday` to `dayofweek.thursday` to mark Nifty expiry days as well.
Wskaźnik Pine Script®
od JoanJagan
Renko Price TrackerRenko Sequential Signal – qLine + Moneyball Confirmation This indicator is designed for Renko chart traders who want to combine price action relative to a key line (qLine) with Moneyball buy/sell signals as a confirmation. It helps filter trades so you only get signals when both conditions align within a chosen time window. How It Works First Event – Price Trigger Detects when the Renko close crosses above/below your selected qLine plot from the qPro indicator. You can choose between: Cross – only triggers on an actual crossover/crossunder. State (Close) – triggers whenever price closes above/below qLine. Second Event – Moneyball Confirmation Waits for Moneyball’s Buy Signal (for long) or Bear/Sell Signal (for short) plot to fire. You select the exact Moneyball plot from the source menu. You can specify how the Moneyball signal is interpreted (== 1, >= 1, or any nonzero value). Sequential Logic The Moneyball signal must occur within N Renko bricks after the price event. The final buy/sell signal is printed on the Moneyball bar. Key Features Works natively on Renko charts. Adjustable confirmation window (0–5 bricks). Flexible detection for both qLine and Moneyball signals. Customizable label sizes, arrow display, and alerts. Alerts fire for both buy and sell conditions: BUY: qLine ➜ Moneyball Buy SELL: qLine ➜ Moneyball Sell Inputs qLine Source – Pick the qPro qLine plot. Price Event Type – Cross or State. Moneyball Buy/Sell Signal Plots – Select the correct plots from your Moneyball indicator. Confirmation Window – Bars allowed between events. Visual Settings – Label size, arrow visibility, etc. Use Case Ideal for traders who: Want a double-confirmation entry system. Use Renko charts for cleaner trend detection. Already have qPro and Moneyball loaded, but want an automated, rule-based confluence check.
Wskaźnik Pine Script®
od galgoom
Fed Cuts (ZQ) - Clear Signal (0-100)Description: 0–100 “cuts signal” for how much markets expect the Fed to cut rates over the next ~12 months. Colors at a glance: 0–33 = Calm (blue) : little/no cuts priced. 33–66 = Watch (amber) : cuts meaningfully priced. 66–100 = Act (red) : substantial cuts priced / accelerating. Key cues to watch: Crosses up through 33 → “Watch”: prep reallocations; tighten risk; line up entries. Crosses up through 66 → “Act”: tilt toward cut-beneficiaries; be careful with rate-sensitive cyclicals. Falls back below 66: urgency cooling—scale back aggressive tilts. Falls back below 33: back to baseline—return to neutral playbook. Fast jumps (few days): rapid repricing—expect headline sensitivity. Best use: Pair with my Risk mood and Labor Softness indicator. Strong agreement = higher-conviction moves. Symbols (once): Near = ZQ1!; Far ≈ ZQ13! (or same month next year). Adjust smoothing if it looks jumpy.
Wskaźnik Pine Script®
od Skapez
استراتژی ساز نئو 01 🇮🇷 A **Strategy Builder** is a tool or framework that lets you **design, test, and optimize** a trading strategy based on predefined rules and conditions. **Purpose** The main goal is to remove emotional decision-making from trading by replacing it with systematic, rule-based execution. **How it works** 1. **Define rules** – You set entry, exit, and risk management conditions (e.g., *Buy when the 50-period moving average crosses above the 200-period moving average*). 2. **Choose parameters** – Such as indicator periods, stop-loss levels, take-profit targets, or position sizing methods. 3. **Backtesting** – The builder tests these rules on historical price data to show how the strategy would have performed in the past. 4. **Optimization** – Adjust the parameters to find the most effective setup while avoiding overfitting. 5. **Deployment** – Use the final strategy either for manual trading or connect it to an automated trading bot. **Key Benefits** * **Consistency** – Eliminates impulsive trades. * **Data-driven decisions** – Every trade is based on tested rules, not guesswork. * **Time-saving** – Once the rules are set, execution can be automated. * **Scalability** – You can create multiple strategies for different markets or timeframes. **Example** Imagine you want to trade EUR/USD: * **Entry rule:** Buy when RSI < 30 and the price is above the 50 SMA. * **Exit rule:** Sell when RSI > 70 or price falls below the 50 SMA. * **Risk control:** Risk 2% of account balance per trade. A Strategy Builder lets you input those rules, run them on 5 years of EUR/USD historical data, and see metrics like win rate, maximum drawdown, and profit factor before risking real money. --- If you want, I can give you a **visual diagram** showing how the process flows from idea → testing → optimization → execution. That makes the concept much easier to grasp.
Strategia Pine Script®
od Kobewong1