Rozpocznij

Candlestick analysis

Session Fibonacci Tracker with Dynamic Range FreezeSession Fibonacci Tracker with Dynamic Range Freeze This indicator plots Fibonacci retracement and extension levels based on session high/low ranges with a unique "freeze" mechanism that locks levels during volatility and recalculates only when price returns to the established range. How It Works: The indicator uses a three-stage process to maintain stable Fibonacci levels: Range Establishment: At the start of each session (default 1800 ET), the indicator tracks the session high and low. Fibonacci levels are calculated with dynamic anchoring - when price is above the session open, 0 anchors at the high with 1 at the low; when below, 0 anchors at the low with 1 at the high. Freeze Mechanism: Once the range is established, it immediately freezes. If a candle closes outside this range, the Fibonacci levels remain locked at their current values even as new session highs or lows form. This prevents levels from constantly recalculating during trending moves. Recalculation: The frozen range only updates when price action (high or low) touches back inside the established range. At this point, levels recalculate based on the current session high/low, then freeze again. Key Features: Customizable Fibonacci levels: All retracement (0.236, 0.382, 0.500, 0.618, 0.786) and extension levels (-1.0, -0.618, -0.272, 1.272, 1.618, 2.0) can be enabled/disabled and adjusted to custom values Time-based line extension prevents historical buffer overflow errors Works across all timeframes Session start time fully customizable Visual status indicator shows whether levels are frozen or active All lines and labels are fully customizable (colors, width, labels, prices) Use Cases: This indicator is particularly useful for traders who want stable reference levels during volatile periods. Traditional Fibonacci tools recalculate with every new extreme, making them difficult to use as support/resistance during trends. This implementation keeps levels stable until price returns to consolidation, providing consistent reference points for entries, exits, and stop placement. Settings: Session Settings: Configure session start time (default 1800 ET) Fibonacci Levels: Enable/disable and customize each retracement level value Extension Levels: Enable/disable and customize each extension level value Visual Settings: Adjust line extension, width, labels, and price display Colors: Customize colors for open line, 0 level, 1 level, retracements, and extensions
Wskaźnik Pine Script®
od Fractaldactyl
NoProcess Prior Month/Week/Day High/Low/EQ Prior Period Levels Plots key support/resistance levels from previous timeframes: Day, Week, and Month. Levels Displayed: PDH/PDL/PDE — Prior Day High, Low, and Equilibrium (midpoint) PWH/PWL/PWE — Prior Week High, Low, and Equilibrium PMH/PML/PME — Prior Month High, Low, and Equilibrium Features: Toggle each timeframe independently Single color control for clean chart aesthetics Configurable right extension (1-50 bars) Dotted line style with labels positioned at line endpoints Use Case: Reference levels for institutional order flow concepts. Prior period highs/lows act as liquidity pools; equilibriums mark fair value zones where price often rebalances. Works on any instrument and timeframe.
Wskaźnik Pine Script®
od noprocess
1
Reversal Reactor - Multi-Pattern Candle Reversal ScannerReversal Reactor - Multi-Pattern Candle Reversal Scanner ⚪ Overview Reversal Reactor is a comprehensive candle-pattern and volume-pressure detection engine designed to highlight possible reversal environments. It identifies abnormal volume surges, major single-candle reversal structures, and multi-candle formations such as Morning/Evening Stars — all refined through adjustable shadow-to-body ratios and adaptive lookback logic. ⚪ Core Features Big-Volume Candle Detection : green or red full body. Flags candles with unusually high volume relative to a volume EMA. These moments often reflect climactic pushes, absorption, forced liquidations, or rapid sentiment flips. Reversal Candle Pattern Suite A unified engine that detects major reversal structures with individual on/off control: • Engulfing — Strong directional assertion via body-wide engulfing of prior candle. • Morning Star — Three-stage bullish reversal following sustained selling. • Evening Star — Bearish transition structure after an extended advance. • Hammer — Long lower or upper wick showing strong rejection from one side of the market.. • Shooting Star — Long upper wick showing aggressive upside rejection. • Hanging Man — Bearish exhaustion signal forming near range highs. • Doji — Neutral indecision candle marking potential transition zones. Shadow-to-Body Ratio Control Fine-tunes wick-dominant pattern detection (hammer/star types) by requiring the shadow to exceed the body by a customizable multiplier, reducing low-quality signals. Adaptive Lookback Logic Allows users to adjust historical evaluation depth, improving sensitivity across different volatility regimes and asset behaviors. Default setting is recommended. ⚪ How Traders Use It • Spot exhaustion near key support/resistance. • Validate reversal attempts with volume confirmation. • Filter for clean candle structures before entering momentum shifts. Disclaimer This indicator is intended for educational and informational purposes only. It does not constitute financial advice, nor does it guarantee performance or profitability. Always conduct your own analysis and manage risk appropriately when trading.
Wskaźnik Pine Script®
od sanbangaje
Momentum Marks - Buy and Sell IndicatorsIndicator Overview This tool is a multi‑factor entry signal system designed to highlight potential BUY and SHORT opportunities directly on the chart with hard‑anchored labels. It combines trend, momentum, volatility, and volume conditions to reduce noise and provide more reliable trade signals. Core Components - EMA Trend Filter - Uses a fast EMA (9) and a slow EMA (21) to determine short‑term vs. medium‑term trend direction. - Signals only trigger when price aligns with the EMA relationship (e.g., fast above slow for shorts, fast below slow for buys). - RSI Extremes - RSI thresholds (default 65/35) ensure signals occur only when momentum is stretched into overbought or oversold zones. - Helps avoid false triggers during neutral conditions. - Linear Regression Channel - A regression line with ±2 standard deviation bands defines dynamic support and resistance. - Signals require price to be near the top (for shorts) or bottom (for buys) of the channel, adding a structural filter. - TTM Squeeze Histogram - Measures momentum shifts by comparing price to its EMA. - Signals require histogram confirmation: weakening momentum for shorts, strengthening momentum for buys. - Volume Confirmation - Volume must fade for shorts or surge for buys relative to a 20‑period average. - Ensures signals align with participation strength. Visual Output - Red “SHORT” label above bars when all short conditions align. - Green “BUY” label below bars when all buy conditions align. - Optional plotshape arrows (triangles) as backup markers. - Linear regression channel shaded between upper and lower bands. - EMA lines plotted for trend context. Key Features - Hard‑anchored labels: Signals are locked to confirmed bars, preventing repainting or shifting. - Multi‑layer confirmation: Requires trend, momentum, volume, and structure to align before firing. - Customizable inputs: Users can adjust EMA lengths, RSI thresholds, regression length, and squeeze parameters.
Wskaźnik Pine Script®
od alexh1166
VWAP + EMA9 With SignalsThis script is for scalping on the 5 minute timeframe. It contains signals that indicate intersection of VWAP by the EMA9. It contains Buy signals when a candle closes above both lines indicating a quick continuation of a long position (quick scalp) as well as Sell signals when a candle closes below both lines indicating a quick continuation of a short position (quick scalp). Please note that i do not recommend entries at Buy and Sell signals during Accumulation/Consolidation. Positions should be taken with volume.
Wskaźnik Pine Script®
od tlc_futures_trader
4
Cloud Matrix [CongTrader]🚀 Cloud Matrix — Advanced Multi-Layer Ichimoku System Cloud Matrix is an enhanced trend-analysis system built on the public-domain Ichimoku Kinko Hyo methodology. This indicator delivers a multi-dimensional view of trend, momentum, and market structure, allowing traders to evaluate market conditions at a glance. Cloud Matrix is not a simple Ichimoku clone. It introduces advanced confirmation logic, multi-timeframe trend filtering, and a modern visual framework designed for today’s dynamic markets. 🔥 Key Features & Highlights 1️⃣ Smart Preset Engine (4 Modes) Choose from optimized presets for different markets and volatility levels: Traditional 9/26/52 Crypto Fast 10/30/60 Crypto Medium 20/60/120 Custom Mode → Fast, adaptable, and beginner-friendly. 2️⃣ Advanced Trend Confirmation Engine Cloud Matrix uses a 5-factor scoring system to filter high-quality signals: Tenkan vs Kijun Price vs Cloud Cloud Twist Chikou Position Close vs Kijun A bullish/bearish signal only triggers when multiple Ichimoku conditions align, reducing noise dramatically. 3️⃣ Higher-Timeframe EMA200 Filter One of the signature strengths of Cloud Matrix: EMA200 from a higher timeframe Helps you follow the dominant macro trend Avoids counter-trend traps Ideal for swing and position traders 4️⃣ Intelligent Auto Signals The indicator includes refined and clean signals for: Bullish / Bearish TK Cross Bullish / Bearish Kumo Breakout All signals support: Labels Alerts “Alert on Close” mode to avoid repaint-related confusion 5️⃣ Enhanced Kumo Cloud Visualization Adjustable opacity (strong / soft) Clear bullish/bearish cloud shading Improved readability on fast markets 6️⃣ Real-Time Market State Dashboard A compact dashboard shows all key Ichimoku conditions: Price vs Cloud Cloud Twist (Bullish/Bearish) Tenkan–Kijun Relationship Chikou Status HTF EMA Trend Active Preset → Designed for instant market diagnostics. 🎯 How Traders Use Cloud Matrix Perfect for: Trend following Swing trading Crypto, Stocks, Forex Early breakout detection Filtering low-quality setups 📌 Suggested Usage Bullish Bias When: Price is above the Cloud Cloud Twist is bullish Tenkan crosses above Kijun Chikou is above price HTF EMA200 is bullish Bearish Bias When: Opposite conditions apply. ⚠️ Important Note This indicator is for analysis and educational purposes only. It does not provide financial advice or guaranteed trading results. Ichimoku concepts belong to the public domain; this is a modernized expansion built for study and research. ✍️ Author CongTrader – 2025 Designed to help traders see the market through a multi-layered, structured lens..
Wskaźnik Pine Script®
od CongTrader_
HTF Candle Overlay – Multi-Timeframe Visualization ToolThis indicator overlays true Higher Timeframe (HTF) candlesticks directly onto any lower timeframe chart, allowing you to see the larger market structure while trading on precise execution timeframes such as 1-minute, 3-minute, or 5-minute. Instead of constantly switching chart timeframes, you can now see both higher and lower timeframe price action at the same time. Each HTF candle is drawn as a large transparent candlestick with full upper and lower wicks, perfectly aligned in both time and price. This makes it easy to identify: - Trend direction from the higher timeframe - Key support and resistance zones inside each HTF candle - Liquidity sweeps and rejections across timeframes - Optimal entries on lower timeframes with higher-timeframe confirmation Key Features - Displays true Higher Timeframe candles on any lower timeframe - Clear transparent candle bodies for unobstructed price visibility - Full upper and lower wicks - Non-repainting confirmed candles - Optional live display of the currently forming HTF candle - Accurate time-based alignment - Lightweight and optimized for performance Who This Indicator Is For - Scalpers who want higher-timeframe bias - Day traders using multi-timeframe confirmation - Smart Money / ICT traders monitoring HTF structure - Anyone who wants clean multi-timeframe clarity without chart switching How To Use - Apply the indicator to any chart. - Select your preferred Higher Timeframe (HTF) in the settings. - Use your lower timeframe for entries while respecting HTF structure and direction. - This tool helps you trade with the bigger picture in view while executing with precision on lower timeframes.
Wskaźnik Pine Script®
od InterdimensionalMars2025
Quicksilver Master Terminal [Institutional]Overview The Quicksilver Master Terminal is a comprehensive data visualization interface designed to bring institutional-grade market awareness to the retail chart. It replaces the need for multiple cluttered indicators by consolidating Trend, Momentum, Volatility, and Structure into a single Heads-Up Display (HUD). ​Designed by Quicksilver Algo Systems, this tool is engineered for precision scalpers and prop firm traders who require instant situational awareness without switching timeframes. ​Features ​ 1. The Institutional HUD (Heads-Up Display) Located in the top-right corner, this live dashboard provides real-time metrics on: ​Market Structure: Instantly identifies if the asset is in a Bullish or Bearish regime relative to the 200 EMA. ​ Momentum Status: Tracks overbought/oversold conditions using smoothed Stochastic logic. ​Volatility (ATR): Displays live Average True Range data for precise Stop Loss placement. ​Volume Flow: Detects institutional volume spikes (1.5x average). ​ 2. The Trend Cloud A dynamic visual ribbon that fills the space between the Fast EMA (50) and Slow EMA (200). ​Green Cloud: Strong Bullish Trend (Look for Longs). ​Red Cloud: Strong Bearish Trend (Look for Shorts). ​Cross: Visual warning of trend reversals. ​ 3. Sniper Signal Logic The script paints "INSTITUTIONAL BUY" and "INSTITUTIONAL SELL" labels only when high-probability confluence occurs: ​Exhaustion: Stochastic RSI breaches extreme levels (<20 or >80). ​Confirmation: Price action aligns with Heikin Ashi smoothing to filter noise. ​Momentum: Fast %K crosses Slow %D. ​ How to Use ​For Scalping (1m - 5m): Wait for the Trend Cloud to align with the Signal. Take "BUY" signals only when the Cloud is Green. ​For Risk Management: Use the live "Volatility" number in the HUD to set your Stop Loss (e.g., 1.5x the current Volatility value). ​About the Developer This script is part of the Quicksilver Ecosystem. We build algorithmic solutions focused on capital preservation and risk management for funded traders. ​Disclaimer: This tool is for educational market analysis only. Past performance is not indicative of future results.
Wskaźnik Pine Script®
od TyFuGotchu
Failed 2 + 3→1 & 1→3 & 1 bar Alerts Failed 2 + Enhanced Strength + 3→1 & 1→3 & Inside Bar Alerts (with Dashboard) This indicator is a strict, rule-based market structure and reversal framework built on The Strat methodology. It detects Failed 2 reversals, compression/expansion sequences (3→1 and 1→3), and confirmed Inside Bars, then grades Failed 2 signals using a multi-factor strength scoring system. A real-time dashboard displays the most recent Failed 2 signal and its strength. The script is designed for bar-close accuracy, objective signal qualification, and visual clarity, without directional bias baked into the dashboard. 1. Core Signal Types Detected A. Strict Failed 2 Reversals Only true, textbook Failed 2 structures are detected. No loose or interpretive logic is used. Failed 2 Up (F2U) A bearish reversal following an attempted break higher: Current bar makes a higher high than the prior bar Current bar does NOT make a lower low Close is below the prior bar’s high Candle closes red (close < open) Failed 2 Down (F2D) A bullish reversal following an attempted break lower: Current bar makes a lower low than the prior bar Current bar does NOT make a higher high Close is above the prior bar’s low Candle closes green (close > open) These rules ensure the market attempted continuation and failed, which is the defining characteristic of a Failed 2. B. Inside Bars (IB) An Inside Bar is defined as: High is lower than the prior bar’s high Low is higher than the prior bar’s low Inside Bars are only confirmed on bar close. ⚠️ Important filtering rule: Inside Bar labels are NOT displayed if the bar is part of a 3→1 or 1→3 sequence, preventing duplicate or misleading labels. C. 3→1 and 1→3 Sequences 3→1 Compression Prior bar is a 3-bar (engulfs the previous bar) Current bar is an Inside Bar This represents volatility compression and potential energy build-up. 1→3 Expansion Prior bar is an Inside Bar Current bar is a 3-bar This represents range expansion and initiative activity. 2. Failed 2 Strength Scoring System (0–5 Points) Each Failed 2 signal is objectively graded using five independent criteria. Each criterion contributes 1 point. Scoring Components Rejection Strength Measures how deeply price rejected back inside the prior bar’s range Strong rejection = 1 point Range vs ATR Current bar range > 75% of ATR Indicates expansion and participation Relative Volume Volume > 1.2× the moving average volume Confirms real interest, not low-liquidity noise Wick Dominance Upper wick dominance for F2U Lower wick dominance for F2D Wick must exceed 50% of total candle range Key Level Proximity Close is within a configurable percentage of: Prior High (for F2U) Prior Low (for F2D) Strength Tiers 0–2 points → Weak 3 points → Strong 4–5 points → Very Strong Strength is displayed both visually on the chart and numerically in the dashboard. 3. Visual Labels Failed 2 Labels Displayed only when enabled: F2U / F2D → Weak F2U! / F2D! → Strong F2U!! / F2D!! → Very Strong Color intensity increases with strength: Red tones for Failed 2 Up Green tones for Failed 2 Down Labels are positioned: Above the bar for F2U Below the bar for F2D Sequence Labels 3→1: Green label below the bar 1→3: Orange label above the bar Inside Bar Label Label text: IB Only shown on confirmed close Only shown if not part of a sequence Small, unobtrusive visual style 4. Alerts (Bar-Close Accurate) The indicator provides four independent alert conditions: Strict Failed 2 Triggers on bar close Fires for either F2U or F2D 3→1 Sequence Compression detected on bar close 1→3 Sequence Expansion detected on bar close Inside Bar Confirmed Inside Bar on bar close All alerts are non-repainting and designed for automation or discretionary execution. 5. Dashboard (Signal Memory System) The dashboard provides context continuity beyond the signal bar itself. What It Displays Current Bar Signal F2U, F2D, or “none” Strength Numeric score (e.g., 4/5) Persists after the signal Sequence 3→1, 1→3, or none Persistence Logic When a Failed 2 occurs: Strength and direction are stored They remain visible for a configurable number of minutes (default: 2) This allows traders to: Enter on pullbacks Maintain context after the signal bar closes Customization Toggle dashboard on/off Choose screen corner placement Custom text color ⚠️ The dashboard is neutral: It does not infer bias It only reports factual, most-recent structure 6. Inputs Summary Toggle labels for: Failed 2 Sequences Inside Bars ATR length for strength normalization Volume average length Key level proximity threshold Strength persistence duration (minutes) Dashboard visibility and positioning
Wskaźnik Pine Script®
od samb817
UNDETECTED FX - Psychologic LevelsThis indicator automatically plots major 250-pip psychological levels on XAUUSD and highlights the price zones around them. These levels act as strong reaction points where liquidity, reversals, and institutional activity commonly occur. What the Indicator Does ✔ Plots every 250-pip level starting from a user-defined base (e.g., 4050 → 4075 → 4100 → 4125 → …) ✔ Each level is represented by a thick black horizontal line for maximum visual clarity ✔ Around every 250-pip level, the indicator draws a liquidity zone Top of zone: +200 pips Bottom of zone: –200 pips (configured as ± zoneHalf in settings) ✔ Uses extend: both, so levels stretch across the entire chart and stay fixed, no matter how far you scroll ✔ Zones are filled with a customizable color for clear premium/discount visualization ✔ The indicator never repaints and requires no updates after drawing — all levels are fixed on their price coordinates Why It’s Useful 🔹 Helps quickly identify institutional levels where gold often reacts 🔹 Acts as a framework for scalping, intraday trading, and swing bias 🔹 Makes it easy to spot liquidity sweeps, rejections, and premium/discount areas 🔹 Clearly shows market structure breaks around key psychological levels 🔹 Forces discipline by creating predefined, fixed levels for trading decisions Best Use Case XAUUSD scalpers Intraday traders who rely on precision entries Traders who use psychological levels, liquidity grabs, or smart-money concepts Anyone wanting a clean, non-cluttered chart with high-impact levels only
Wskaźnik Pine Script®
od Undetectedd
猛の掟・本物っぽいTradingViewスクリーナー 完全版//@version=5 indicator("猛の掟・本物っぽいTradingViewスクリーナー 完全版", overlay=false, max_labels_count=500, max_lines_count=500) // ============================= // 入力パラメータ // ============================= emaLenShort = input.int(5, "短期EMA", minval=1) emaLenMid = input.int(13, "中期EMA", minval=1) emaLenLong = input.int(26, "長期EMA", minval=1) macdFastLen = input.int(12, "MACD Fast", minval=1) macdSlowLen = input.int(26, "MACD Slow", minval=1) macdSignalLen = input.int(9, "MACD Signal", minval=1) macdZeroTh = input.float(0.2, "MACDゼロライン近辺とみなす許容値", step=0.05) volMaLen = input.int(5, "出来高平均日数", minval=1) volMinRatio = input.float(1.3, "出来高倍率(初動判定しきい値)", step=0.1) volStrongRatio = input.float(1.5, "出来高倍率(本物/三点シグナル用)", step=0.1) highLookback = input.int(60, "直近高値の参照本数", minval=10) pullbackMin = input.float(5.0, "押し目最小 ", step=0.5) pullbackMax = input.float(15.0, "押し目最大 ", step=0.5) breakLookback = input.int(15, "レジブレ後とみなす本数", minval=1) wickBodyMult = input.float(2.0, "ピンバー:下ヒゲが実体の何倍以上か", step=0.5) // 表示設定 showPanel = input.bool(true, "下パネルにスコアを表示する") showTable = input.bool(true, "右上に8条件チェック表を表示する") // ============================= // 基本指標計算 // ============================= emaShort = ta.ema(close, emaLenShort) emaMid = ta.ema(close, emaLenMid) emaLong = ta.ema(close, emaLenLong) = ta.macd(close, macdFastLen, macdSlowLen, macdSignalLen) volMa = ta.sma(volume, volMaLen) volRatio = volMa > 0 ? volume / volMa : 0.0 recentHigh = ta.highest(high, highLookback) prevHigh = ta.highest(high , highLookback) pullbackPct = recentHigh > 0 ? (recentHigh - close) / recentHigh * 100.0 : 0.0 // ローソク足要素 body = math.abs(close - open) upperWick = high - math.max(open, close) lowerWick = math.min(open, close) - low // ============================= // A：トレンド条件 // ============================= emaUp = emaShort > emaShort and emaMid > emaMid and emaLong > emaLong goldenOrder = emaShort > emaMid and emaMid > emaLong aboveEma2 = close > emaLong and close > emaLong trendOK = emaUp and goldenOrder and aboveEma2 // ============================= // B：MACD条件 // ============================= macdGC = ta.crossover(macdLine, macdSignal) macdNearZero = math.abs(macdLine) <= macdZeroTh macdUp = macdLine > macdLine macdOK = macdGC and macdNearZero and macdUp // ============================= // C：出来高条件 // ============================= volInitOK = volRatio >= volMinRatio // 8条件用 volStrongOK = volRatio >= volStrongRatio // 三点シグナル用 volumeOK = volInitOK // ============================= // D：ローソク足パターン // ============================= isBullPinbar = lowerWick > wickBodyMult * body and lowerWick > upperWick and close >= open isBullEngulf = close > open and open < close and close > open isBigBullCross = close > emaShort and close > emaMid and open < emaShort and open < emaMid and close > open candleOK = isBullPinbar or isBullEngulf or isBigBullCross // ============================= // E：価格帯（押し目＆レジブレ） // ============================= pullbackOK = pullbackPct >= pullbackMin and pullbackPct <= pullbackMax isBreakout = close > prevHigh and close <= prevHigh barsSinceBreak = ta.barssince(isBreakout) afterBreakZone = barsSinceBreak >= 0 and barsSinceBreak <= breakLookback afterBreakPullbackOK = afterBreakZone and pullbackOK and close > emaShort priceOK = pullbackOK and afterBreakPullbackOK // ============================= // 8条件の統合 // ============================= allRulesOK = trendOK and macdOK and volumeOK and candleOK and priceOK // ============================= // 最終三点シグナル // ============================= longLowerWick = lowerWick > wickBodyMult * body and lowerWick > upperWick macdGCAboveZero = ta.crossover(macdLine, macdSignal) and macdLine > 0 volumeSpike = volStrongOK finalThreeSignal = longLowerWick and macdGCAboveZero and volumeSpike buyConfirmed = allRulesOK and finalThreeSignal // ===================================================== // スクリーナー用スコア（0=なし, 1=猛, 2=確） // ===================================================== score = buyConfirmed ? 2 : (allRulesOK ? 1 : 0) // 色分け（1行で安全な書き方） col = score == 2 ? color.new(color.yellow, 0) : score == 1 ? color.new(color.lime, 0) : color.new(color.gray, 80) // ----------------------------------------------------- // ① 視覚用：下パネルのカラム表示 // ----------------------------------------------------- plot(showPanel ? score : na, title = "猛スコア（0=なし,1=猛,2=確）", style = plot.style_columns, color = col, linewidth = 2) hline(0, "なし", color=color.new(color.gray, 80)) hline(1, "猛", color=color.new(color.lime, 60)) hline(2, "確", color=color.new(color.yellow, 60)) // ----------------------------------------------------- // ② Data Window 用出力（スクリーナー風） // ----------------------------------------------------- plot(score, title="Score_0なし1猛2確", color=color.new(color.white, 100), display=display.data_window) plot(allRulesOK ? 1 : 0, title="A_Trend_OK", color=color.new(color.white, 100), display=display.data_window) plot(macdOK ? 1 : 0, title="B_MACD_OK", color=color.new(color.white, 100), display=display.data_window) plot(volumeOK ? 1 : 0, title="C_Volume_OK", color=color.new(color.white, 100), display=display.data_window) plot(candleOK ? 1 : 0, title="D_Candle_OK", color=color.new(color.white, 100), display=display.data_window) plot(priceOK ? 1 : 0, title="E_Price_OK", color=color.new(color.white, 100), display=display.data_window) plot(longLowerWick ? 1 : 0, title="F_Pin下ヒゲ_OK", color=color.new(color.white, 100), display=display.data_window) plot(macdGCAboveZero ? 1 : 0, title="G_MACDゼロ上", color=color.new(color.white, 100), display=display.data_window) plot(volumeSpike ? 1 : 0, title="H_出来高1.5倍", color=color.new(color.white, 100), display=display.data_window) // ----------------------------------------------------- // ③ 右上に「8条件チェック表」を表示（最終バーのみ） // ----------------------------------------------------- var table info = table.new(position.top_right, 2, 9, border_width = 1, border_color = color.new(color.white, 60)) // 1行分の表示用ヘルパー fRow(string label, bool cond, int row) => color bg = cond ? color.new(color.lime, 70) : color.new(color.red, 80) string txt = cond ? "達成" : "未達" // 左列：条件名 table.cell(info, 0, row, label, text_color = color.white, bgcolor = color.new(color.black, 0)) // 右列：結果（達成 / 未達） table.cell(info, 1, row, txt, text_color = color.white, bgcolor = bg) if barstate.islast and showTable // ヘッダー（2列とも黒背景） table.cell(info, 0, 0, "猛の掟 8条件チェック", text_color = color.white, bgcolor = color.new(color.black, 0)) table.cell(info, 1, 0, "", text_color = color.white, bgcolor = color.new(color.black, 0)) fRow("A: トレンド", trendOK, 1) fRow("B: MACD", macdOK, 2) fRow("C: 出来高", volumeOK, 3) fRow("D: ローソク", candleOK, 4) fRow("E: 押し目/レジブレ", priceOK, 5) fRow("三点: ヒゲ", longLowerWick, 6) fRow("三点: MACDゼロ上", macdGCAboveZero,7) fRow("三点: 出来高1.5倍", volumeSpike, 8)
Wskaźnik Pine Script®
od morishima0ut6b
Cold Brew Ranges🧭 Core Logic and Calculation The fundamental logic for each range (OR and CR) is identical: Time Definition: Each range is defined by a specific Start Time and a fixed 30-second duration. The timestamp function, using the "America/New_York" time zone, is used to calculate the exact start time in Unix milliseconds for the current day. Example: t0200 = timestamp(TZ, yC, mC, dC, 2, 0, 0) sets the start time for the 02:00 OR to 2:00:00 AM NY time. Range Data Collection: The indicator uses the request.security_lower_tf() function to collect the High (hArr) and Low (lArr) prices of all bars that fall within the defined 30-second window, using a user-specified, sub-chart-timeframe (openrangetime, defaulted to "1" second, "30S", or "5" minutes). This ensures high precision in capturing the exact high and low during the 30-second window. High/Low Determination: It iteratively finds the absolute highest price (OR_high) and the absolute lowest price (OR_low) recorded by the bars during that 30-second window. Range Locking: Once the current chart bar's time (lastTs) passes the 30-second End Time (tEnd), the High and Low are locked (OR_locked = true), meaning the range calculation is complete for the day. Drawing: Upon locking, the range is drawn on the chart using line.new for the High, Low, and Equilibrium, and box.new for the shaded fill. The lines are extended to a subsequent time anchor point (e.g., the 02:00 OR is extended to 08:20, the 09:30 OR is extended to 16:00). Equilibrium (EQ): This is calculated as the simple average (midpoint) of the High and Low of the range. EQ= 2 OR_High+OR_Low ​ ⏰ Defined Trading Ranges The indicator defines and tracks the following specific 30-second ranges: Range Name Type Start Time (NY) Line Extension End Time (NY) Common Market Context 02:00 OR Opening 02:00:00 08:20:00 Asian/European Market Overlap 08:20 OR Opening 08:20:00 16:00:00 Pre-New York Open 09:30 OR Opening 09:30:00 16:00:00 New York Stock Exchange Open (Most significant OR) 18:00 OR Opening 18:00:00 20:00:00 Futures Market Open (Sunday/Monday) 20:00 OR Opening 20:00:00 Next Day's session start Asian Session Start 15:50 CR Closing 15:50:00 20:00:00 New York Close Range ⚙️ Key User Inputs and Customization The script offers extensive control over which ranges are displayed and how they are visualized: Range Time & History openrangetime: Sets the sub-timeframe (e.g., "1" for 1 second) used to calculate the precise High/Low of the 30-second range. Crucial for accuracy. showHistory: A toggle to show the ranges from previous days (up to a histCap of 50 days). Range Toggles and Styling On/Off Toggles: Independent input.bool (e.g., OR_0200_on) to enable or disable the display of each individual range. Colors & Width: Separate color and width inputs for the High/Low lines (hlC), the Equilibrium line (eqC), and the background fill (fillC) for each range. Line Styles: Global inputs for the line styles of High/Low (lineStyleInput) and Equilibrium (eqLineStyleInput) lines (Solid, Dotted, or Dashed). showFill: Global toggle to enable the shaded background box that highlights the area between the High and Low. Extensions The script calculates and plots extensions (multiples of the initial range) above the High and below the Low. showExt: Toggles the visibility of the extension lines. useRangeMultiples: If true, the step size for each extension level is equal to the initial range size: Step=Range=OR_High−OR_Low If false, the step size is a fixed value defined by stepPts (e.g., 60.0 points, which is a common value for NQ futures). stepCnt: Determines how many extension levels (multiples) are drawn above and below the range (default is 10). 📈 Trading Strategy Implications The Cold Brew Ranges indicator is a tool for session-based support and resistance and range breakout/reversal strategies. Key Support/Resistance: The High and Low of these defined opening ranges often act as strong, predefined price levels. Traders look for price rejection off these boundaries or a breakout with conviction. Equilibrium (Midpoint): The EQ often represents a fair value for that specific session's opening. Movements away from it are seen as opportunities, and a return to it is common. Extensions: The range extensions serve as potential profit targets or stronger, layered support/resistance levels if the market trends aggressively after the opening range is set. The core idea is that the activity in the first 30 seconds of a significant trading session (like the NYSE or a market session open) sets a bias and initial boundary for the trading period that follows.
Wskaźnik Pine Script®
od noprocess
2