Rozpocznij

Average True Range (ATR)

.srb suite vol & infoThe volume indicator what can replace the built-in volume indicator and It also has some useful features. and designed to work as overlay in the same pane with open-source indicator by default. Regular volume Indicator Volume SMA plot Large Volume ! emphasize by color & mark. Ultra Volume ! overlay marking ; x2 x4 x6 lager than regular average volume. it will help you can take the reversal BTC-agg. Volume 4 BTC-spot & 4 BTC-PERP volume aggregated. It might helps you don't miss out on important volume flows. Weighted to spot trading volume when using PERP+spot volume. If enabled, BTC-agg.Vol automatically applied when selecting BTC-pair. Information panel (optimized for crypto-currency) BTC-PERP price & delta (when Binance:BTCUSDT selected) BTC dominance, Binance:BTCUSDTPERP OI Symbol, Price, Daily up/down ATR14 (for checking current volatility) Recommended setup for .srb suite tradingview | chart setting > Appearance > Top margin 0%, Bottom margin 0% for optimized screen usage tradingview | chart setting > Appearance > Right margin 57 .srb suite vol & info --> Visual Order > Bring to Front .srb suite vol & info --> Pin to scale > No scale (Full-screen)
Wskaźnik Pine Script™
od sr_b
10
Volatility Pivot Support and Resistance [Loxx]Volatility Pivot Support and Resistance calculates "pivots" (support/resistance lines) based on current symbol/timeframe Average True Range calculated volatility. What is Average True Range? The average true range (ATR) is a technical analysis indicator, introduced by market technician J. Welles Wilder Jr. in his book New Concepts in Technical Trading Systems, that measures market volatility by decomposing the entire range of an asset price for that period. The true range indicator is taken as the greatest of the following: current high less the current low; the absolute value of the current high less the previous close; and the absolute value of the current low less the previous close. The ATR is then a moving average, generally using 14 days, of the true ranges. Included: -Bar coloring
Wskaźnik Pine Script™
od loxx
Chandelier Exit - Heikin AshiThis is a redesign of the Chandelier Exit indicator. It removes stupid transitions between Chandelier Exit' states and highlights initial points for both lines. This indicator was originally developed by Charles Le Beau and popularized by Dr . Alexander Elder in his book "Come Into My Trading Room: A Complete Guide to Trading" (2002). In short, this is a trailing stop-loss based on the Average True Range (ATR). If "Heikin Ashi for calculation" is checked, then ATR and buy/sell signals are calculated based on heikin ashi candles. You don't need to change bar style to heikin ashi. Thanks to everget for the initial version.
Wskaźnik Pine Script™
od mpeick
11
ADR% / ATR / Market CapDisplays the following values in a table in the upper right corner of the chart: ADR%: Average daily range (in percent). ATR: Average true range (hidden by default). Market Cap: Total value of all a company's shares of stock. All values are calculated based on daily bars, no matter what time frame you are currently viewing. Doesn't work for time frames >1D, which is why the table is not shown on weekly/monthly charts. Credit to MikeC / TheScrutiniser and GlinckEastwoot for ADR% formula, and ArmerSchlucker for the original script which includes LoD Dist . instead of Market Cap.
Wskaźnik Pine Script™
od rwak
5
Spinn ATR targetNot quite the usual approach to plotting targets on the chart, where the price will come with a given probability. The indicator draws targets by studying the ATR of the target timeframe. More precisely, this is not exactly an ATR - the price move is taken from the closing price of the previous bar and is calculated both up and down separately. The settings specify the percentage used to calculate the price move, at which the specified percentage of bars reached this price move in the past. Simply put, if we set 50% in the settings, this means that a line will be drawn at the level at which the price reached this level in 50% of cases over a given period. -- Не совсем обычный подход к построению целей на графике, куда цена придет с заданной вероятностью. Индикатор рисует цели, изучая ATR целевого таймфрейма. Точнее, это не совсем ATR - ход цены берется от цены закрытия предыдущего бара и считается отдельно как вверх, так и вниз. В настройках задается процент, исходя из которого вычисляется ход цены, при котором заданный процент баров достигал этого хода цены ранее. Проще говоря, если мы задаем в настройках 50%, то это означает, что будет построена линия на том уровне, на котором цена в 50% случаев за заданный период достигала этого уровня.
Wskaźnik Pine Script™
od Spinn29
10
Fake breakHi Traders, I've developed an indicator which can detect fake-breaks on the chart. In the following you'll find the definition of the fake break candles and also you will find how to recognize it on the chart with practical examples. What is the fake break pattern? Sometimes support and resistance lines broke with a full body and strong candles that gives us the idea of sharp movements on the chart but suddenly the next candle returns all the path of the previous candle. in this case we can say fake break is happening on the chart. This indicator detect fake break patterns based on two criteria: 1. It uses AverageTrueRange indicator to measure the strength of the pattern. 2. The returning candle should engulf minimum 75% of the break candle. This indicator plot 2 terms in the name of "FB-D" and "FB-U" that are abbreviations of the "Fake Break Down" and "Fake Break Up". You can also set alerts to get notified when fake breakout happens on the chart. Notice: This pattern is only acceptable in valid support and resistance zones and you can not rely on it everywhere on the chart (specially in the middle of the waves). Notice: The source code of this indicator is open and you are allowed to use it on your scripts by mentioning the name of author. Disclaimer: This is not a financial advice or any signal to buy or sell, the goal of developing such an indicator is to use for educational purposes.
Wskaźnik Pine Script™
od salarkamjoo
9
Spinn ATR tableThe table contains summary data on the ATR from different timeframes and for different periods. You can view both absolute values ​​and the percentage of the average price move to the current price. This data can be used to compare the ATR on different timeframes. And, most importantly, you can compare the ATR of different coins. In addition, the last column shows the average deviation of the ATR for each of the timeframes. You can compare these values ​​on different coins to determine which ones are more volatile . Note. Using the indicator on different timeframes may give slightly different values ​​due to the difference in the stored data for these timeframes. -- В таблице собраны сводные данные по ATR с разных таймфреймов и за разные периоды. Можно просматривать как абсолютные значения, так и процентное соотношение среднего хода цены к текущей цене. Эти данные можно использовать, чтобы сравнить ATR на разных таймфреймах. И, самое главное, можно сравнивать ATR разных монет. Кроме того, в последней колонке указано среднее отклонение ATR по каждому из таймфреймов. Можно сравнивать эти значения на разных монетах, чтобы определить - какие из них более волатильны . Примечание. Использование индикатора на разных таймфреймах может давать слегка разные значения из-за разницы в хранимых данных для этих таймфреймов.
Wskaźnik Pine Script™
od Spinn29
3
ATR LevelsATR Levels The indicator plots levels based on the ATR indicator Initial data required for the indicator: - Open price - ATR Levels are calculated as follows: 1. Open price +100% ATR 2. Open price +50% ATR 3. Open price 4. Open price -50% ATR 5. Open price -100% ATR For visual convenience: The area between levels 1-2 and 4-5 is filled with red Zone between levels 2-4 - filled with green Уровни среднего истинного диапазона Индикатор строит уровни, основанные на индикаторе ATR (Средний истинный диапазон) Исходные данные, необходимы для индикатора: - Цена открытия - ATR (Средний истинный диапазон) Уровни рассчитываются следующим образом: 1. Цена открытия +100% ATR 2. Цена открытия +50% ATR 3. Цена открытия 4. Цена открытия -50% ATR 5. Цена открытия -100% ATR Для удобства визуального восприятия: Зона между уровнями 1-2 и 4-5 заполнена красным цветом Зона между уровнями 2-4 - заполнена зеленым цветом
Wskaźnik Pine Script™
od CBzeek
4
Adaptive ATR Keltner Channels [Loxx]Adaptive ATR Channels are adaptive Keltner channels. ATR is calculated using a rolling signal-to-noise ratio making this indicator flex more to changes in price volatility than the fixed Keltner Channels. What is Average True Range (ATR)? The average true range (ATR) is a technical analysis indicator, introduced by market technician J. Welles Wilder Jr. in his book New Concepts in Technical Trading Systems, that measures market volatility by decomposing the entire range of an asset price for that period.1 The true range is taken as the greatest of the following: current high less the current low; the absolute value of the current high less the previous close; and the absolute value of the current low less the previous close. The ATR is then a moving average, generally using 14 days, of the true ranges. What are Keltner Channel (ATR)? Keltner Channels are volatility-based bands that are placed on either side of an asset's price and can aid in determining the direction of a trend. The Keltner channel uses the average-true range (ATR) or volatility, with breaks above or below the top and bottom barriers signaling a continuation.
Wskaźnik Pine Script™
od loxx
3
ATR Adaptive EMA [Loxx]ATR adaptive EMA is an exponential moving average with dynamic ATR-adjusted length inputs. What is Average True Range (ATR)? The average true range (ATR) is a technical analysis indicator, introduced by market technician J. Welles Wilder Jr. in his book New Concepts in Technical Trading Systems, that measures market volatility by decomposing the entire range of an asset price for that period.1 The true range is taken as the greatest of the following: current high less the current low; the absolute value of the current high less the previous close; and the absolute value of the current low less the previous close. The ATR is then a moving average, generally using 14 days, of the true ranges.
Wskaźnik Pine Script™
od loxx
2
Customizable Non-Repainting HTF MACD MFI Scalper Bot Strategy v2Customizable Non-Repainting HTF MACD MFI Scalper Bot Strategy v2 This script was originally shared by Wunderbit as a free open source script for the community to work with. This is my second published iteration of this idea. WHAT THIS SCRIPT DOES: It is intended for use on an algorithmic bot trading platform but can be used for scalping and manual trading. This strategy is based on the trend-following momentum indicator . It includes the Money Flow index as an additional point for entry. This is a new and improved version geared for lower timeframes (15-5 minutes), but can be run on larger ones as well. I am testing it live as my high frequency trader. HOW IT DOES IT: It uses a combination of MACD and MFI indicators to create entry signals. Parameters for each indicator have been surfaced for user configurability. Take profits are now trailing profits, and the stop loss is now fixed. Why? I found that the trailing stop loss with ATR in the previous version yields very good results for back tests but becomes very difficult to deploy live due to transaction fees. As you can see the average trade is a higher profit percentage than the previous version. HOW IS MY VERSION ORIGINAL: Now instead of using ATR stop loss, we have a fixed stop loss - counter intuitively to what some may believe this performs better in live trading scenarios since it gives the strategy room to move. I noticed that the ATR trailing stop was stopping out too fast and was eating away balance due to transaction fees. The take profit on the other hand is now a trailing profit with a customizable deviation. This ensures that you can have a minimum profit you want to take in order to exit. I have depracated the old ATR trailing stop as it became too confusing to have those as different options. I kept the old version for others that want to experiment with it. The source code still requires some cleanup, but its fully functional. I added in a way to show RSI values and ATR values with a checkbox so that you can use the new an improved ATR Filter (and grab the right RSI values for the RSI filter). This will help to filter out times of very low volatility where we are unlikely to find a profitable trade. Use the "Show Data" checkbox to see what the values are on the indicator pane, then use those values to gauge what you want to filter out. Both versions Delayed Signals : The script has been refactored to use a time frame drop down. The higher time frame can be run on a faster chart (recommended on one minute chart for fastest signal confirmation and relay to algotrading platform.) Repainting Issues : All indicators have been recoded to use the security function that checks to see if the current calculation is in realtime, if it is, then it uses the previous bar for calculation. If you are still experiencing repainting issues based on intended (or non intended use), please provide a report with screenshot and explanation so I can try to address. Filtering : I have added to additional filters an ABOVE EMA Filter and a BELOW RSI Filter (both can be turned on and off) Customizable Long and Close Messages : This allows someone to use the script for algorithmic trading without having to alter code. It also means you can use one indicator for all of your different alterts required for your bots. HOW TO USE IT: It is intended to be used in the 5-30 minute time frames, but you might be able to get a good configuration for higher time frames. I welcome feedback from other users on what they have found. Find a pair with high volatility (example KUCOIN:ETH3LUSDT ) - I have found it works particularly well with 3L and 3S tokens for crypto. although it the limitation is that confrigurations I have found to work typically have low R/R ratio, but very high win rate and profit factor. Ideally set one minute chart for bots, but you can use other charts for manual trading. The signal will be delayed by one bar but I have found configurations that still test well. Select a time frame in configuration for your indicator calculations. Select the strategy config for time frame (resolution). I like to use 5 and 15 minutes for scalping scenarios, but I am interested in hearing back from other community memebers. Optimize your indicator without filters : customize your settings for MACD and MFI that are profitable with your chart and selected time frame calculation. Try different Take Profits (try about 2-5%) and stop loss (try about 5-8%). See if your back test is profitable and continue to optimize. Use the Trend, RSI, ATR Filter to further refine your signals for entry. You will get less entries but you can increase your win ratio. You can use the open and close messages for a platform integration, but I choose to set mine up on the destination platform and let the platform close it. With certain platforms you cannot be sure what your entry point actually was compared to Trading View due to slippage and timing, so I let the platform decide when it is actually profitable. Limitations: this works rather well for short term, and does some good forward testing but back testing large data sets is a problem when switching from very small time frame to large time frame. For instance, finding a configuration that works on a one minute chart but then changing to a 1 hour chart means you lose some of your intra bar calclulations. There are some new features in pine script which might be able to address, this, but I have not had a chance to work on that issue.
Strategia Pine Script™
od MauricioZuniga
14
Customizable Non-Repainting HTF MACD MFI Scalper Bot StrategyThis script was originally shared by Wunderbit as a free open source script for the community to work with. WHAT THIS SCRIPT DOES: It is intended for use on an algorithmic bot trading platform but can be used for scalping and manual trading. This strategy is based on the trend-following momentum indicator . It includes the Money Flow index as an additional point for entry. HOW IT DOES IT: It uses a combination of MACD and MFI indicators to create entry signals. Parameters for each indicator have been surfaced for user configurability. Take profits are fixed, but stop loss uses ATR configuration to minimize losses and close profitably. HOW IS MY VERSION ORIGINAL: I started trying to deploy this script myself in my algorithmic trading but ran into some issues which I have tried to address in this version. Delayed Signals : The script has been refactored to use a time frame drop down. The higher time frame can be run on a faster chart (recommended on one minute chart for fastest signal confirmation and relay to algotrading platform.) Repainting Issues : All indicators have been recoded to use the security function that checks to see if the current calculation is in realtime, if it is, then it uses the previous bar for calculation. If you are still experiencing repainting issues based on intended (or non intended use), please provide a report with screenshot and explanation so I can try to address. Filtering : I have added to additional filters an ABOVE EMA Filter and a BELOW RSI Filter (both can be turned on and off) Customizable Long and Close Messages : This allows someone to use the script for algorithmic trading without having to alter code. It also means you can use one indicator for all of your different alterts required for your bots. HOW TO USE IT: It is intended to be used in the 5-30 minute time frames, but you might be able to get a good configuration for higher time frames. I welcome feedback from other users on what they have found. Find a pair with high volatility (example KUCOIN:ETH3LUSDT ) - I have found it works particularly well with 3L and 3S tokens for crypto. although it the limitation is that confrigurations I have found to work typically have low R/R ratio, but very high win rate and profit factor. Ideally set one minute chart for bots, but you can use other charts for manual trading. The signal will be delayed by one bar but I have found configurations that still test well. Select a time frame in configuration for your indicator calculations. Select the strategy config for time frame. I like to use 5 and 15 minutes for scalping scenarios, but I am interested in hearing back from other community memebers. Optimize your indicator without filters (trendFilter and RSI Filter) Use the TrendFilter and RSI Filter to further refine your signals for entry. You will get less entries but you can increase your win ratio. I will add screenshots and possibly a video provided that it passes community standards. Limitations: this works rather well for short term, and does some good forward testing but back testing large data sets is a problem when switching from very small time frame to large time frame. For instance, finding a configuration that works on a one minute chart but then changing to a 1 hour chart means you lose some of your intra bar calclulations. There are some new features in pine script which might be able to address, this, but I have not had a chance to work on that issue.
Strategia Pine Script™
od MauricioZuniga
11
Bollinger Bands + Keltner Channel Refurbished█ Goals This is an indicator that brings together Bollinger Bands and Keltner's Channels in one thing. Both are very similar, so I decided to make a merge of the best features I found out there. Here there is the possibility of choosing one of these two as needed. In addition, I added the following resources: 1. Pre-Defined intermediate bands with Fibonacci values; 2. Detachment of the bands in which the price was present; 3. Choice of Moving Average: "Simple", "Exponential", "Regularized Exponential", "Hull", "Arnaud Legoux", "Weighted Moving Average", "Least Squares Moving Average (Linear Regression)", "Volume Weighted Moving Average", "Smoothed Moving Average", "Median", "VWAP"); 4. Statistics: bars count within the bands. █ Concepts Keltner Channels vs. Bollinger Bands "These two indicators are quite similar. Keltner Channels use ATR to calculate the upper and lower bands while Bollinger Bands use standard deviation instead. The interpretation of the indicators is similar, although since the calculations are different the two indicators may provide slightly different information or trade signals." (Investopedia) Bollinger Bands (BB) "Bollinger Bands (BB) are a widely popular technical analysis instrument created by John Bollinger in the early 1980’s. Bollinger Bands consist of a band of three lines which are plotted in relation to security prices. The line in the middle is usually a Simple Moving Average (SMA) set to a period of 20 days (the type of trend line and period can be changed by the trader; however a 20 day moving average is by far the most popular). The SMA then serves as a base for the Upper and Lower Bands which are used as a way to measure volatility by observing the relationship between the Bands and price. Typically the Upper and Lower Bands are set to two standard deviations away from the SMA (The Middle Line); however the number of standard deviations can also be adjusted by the trader." (TradingView) Keltner Channels (KC) "The Keltner Channels (KC) indicator is a banded indicator similar to Bollinger Bands and Moving Average Envelopes. They consist of an Upper Envelope above a Middle Line as well as a Lower Envelope below the Middle Line. The Middle Line is a moving average of price over a user-defined time period. Either a simple moving average or an exponential moving average are typically used. The Upper and Lower Envelopes (user defined) are set a range away from the Middle Line. This can be a multiple of the daily high/low range, or more commonly a multiple of the Average True Range." (TradingView) █ Examples Bollinger Bands with 200 REMA: Keltner Channel with 200 REMA: Bollinger Bands with 55 ALMA: Keltner Channel with 55 ALMA: Bollinger Bands with 55 Least Squares Moving Average: █ Thanks - TradingView (BB, KC, ATR, MA's) - everget (Regularized Exponential Moving Average) - TimeFliesBuy ("Triple Bollinger Bands") - Rashad ("Fibonacci Bollinger Bands") - Dicargo_Beam ("Is the Bollinger Bands assumption wrong?")
Wskaźnik Pine Script™
od andre_007
20
SL and TP - ATRThis indicator is using ATR ( Average True Range ) to set the Target point and Stop loss. Use the pink number as target, always. If you are in Long position, use the green number as stop loss, so the red number is not useful in Buys. If you are in Short position, use the Red number as stop loss, so the green number is not useful in Sells. ** Need to enter the numbers in ticks --> VERY IMPORTANT: Write it completely, even the numbers after the point sign but DO NOT WRITE the point sign itself. e.g. : if the target tick on indicator is 123.75, you have to write 12375 ticks for your TP. ( one more example: If the number is 0.0001203 , write 1203 ticks. ) Enter the information of the opening candle. Most of the times, risk/reward ratio is a bit higher than 1. Works on multi timeframes. P.S: Haven't checked the weekly timeframe. Not trying to oversell the indicator, but this is perhaps the best TP/SL specifier. For beauty purposes, change (Sl @ buy) and (TP @ sell) to histograms. Histograms are only for visual purposes. Customize the indicator as you want :)) Hope you enjoy
Wskaźnik Pine Script™
od Dr_M_A
ATR with MAOVERVIEW The Average True Range Moving Average (ATRMA) is a technical indicator that gauges the amount of volatility currently present in the market, relative to the historical average volatility that was present before. It adds a moving average to the Average True Range (ATR) indicator. This indicator is extremely similar to the VOXI indicator, but instead of measuring volume, it measures volatility. Volume measures the amount of shares/lots/units/contracts exchanged per unit of time. Volatility, on the other hand, measures the range of price movement per unit of time. The purpose of this indicator is to help traders filter between non-volatile periods in the market from volatile periods in the market without introducing subjectivity. It can also help long-term investors to determine market regime using volatility without introducing subjectivity. CONCEPTS This indicator assumes that trends are more likely to start during periods of high volatility, and consolidation is more likely to persist during periods of low volatility. The indicator also assumes that the average true range (ATR) of the last 14 candles is reflective of the current volatility in the market. ATR is the average height of all the candles, where height = |high - low|. Suppose the ATR of the last 14 candles is greater than a moving average of the ATR(14) of the last 20 candles (this occurs whenever the indicator's filled region is colored BLUE). In that case, we can assume that the current volatility in the market is high. Suppose the ATR of the last 14 candles is less than the moving average of the ATR(14) of the last 20 candles (this occurs whenever the indicator's filled region is colored RED). In that case, we can assume that the current volatility in the market is low. HOW DO I READ THIS INDICATOR? If the ATR line is above the ATR MA line (indicated by the blue color), the current volatility is greater than the historical average volatility. If the ATR line is above the ATR MA line (indicated by the red color), the current volatility is less than the historical average volatility.
Wskaźnik Pine Script™
od bjr117
1