DrawIndicatorOnTheChart

Library "DrawIndicatorOnTheChart"
this library is used to show an indicator (such RSI, CCI, MOM etc) on the main chart with indicator's horizontal lines in a window. Location of the window is calculated dynamically by last price movemements

drawIndicator(enabled, indicatorName, indicator1, indicator2, indicator3, indicatorcolors, period, indimax_, indimin_, levels, precision, xlocation, lnwidth)
draws the realted indicator on the chart
Parameters:
enabled (bool): if it's enabled to show
indicatorName (string): is the indicator name as string such "RSI", "CCI" etc
indicator1 (float): is first indicator you want to show, such rsi(close, 14), mom(close, 10) etc
indicator2 (float): is second indicator you want to show, such -DI of DMI
indicator3 (float): is third indicator you want to show, such ADX of DMI
indicatorcolors (array<color>)
period (int): is the length of the window to show
indimax_ (float): is the maximum value of the indicator, for example for RSI it's 100.0, if the indicator (such CCI, MOM etc) doesn't have maximum value then use "na"
indimin_ (float): is the minimum value of the indicator, for example for RSI it's 0.0, if the indicator (such CCI, MOM etc)doesn't have maximum value then use "na"
levels (array<float>): is the levels of the array for the horizontal lines. for example if you want horizontal lines at 30.0, and 70.0 then use array.from(30.0, 70.0). if no horizontal lines then use array.from(na)
precision (int): is the precision/nuber of decimals that is used to show indicator values, for example for RSI set it 2
xlocation (int): is end location of the indicator window, for example if xlocation = 0 window is created on the index of the last bar/candle
lnwidth (int): is the line width of the indicator lines
Returns: none

Informacje o Wersji

v2

업데이트됨
drawIndicator(enabled, indicatorName, indicator1, indicator2, indicator3, indicatorcolors, period, indimax_, indimin_, levels, precision, xlocation, lnwidth, windowLabel)
draws the realted indicator on the chart
Parameters:
enabled (bool): if it's enabled to show
indicatorName (string): is the indicator name as string such "RSI", "CCI" etc
indicator1 (float): is first indicator you want to show, such rsi(close, 14), mom(close, 10) etc
indicator2 (float): is second indicator you want to show, such -DI of DMI
indicator3 (float): is third indicator you want to show, such ADX of DMI
indicatorcolors (array<color>)
period (int): is the length of the window to show
indimax_ (float): is the maximum value of the indicator, for example for RSI it's 100.0, if the indicator (such CCI, MOM etc) doesn't have maximum value then use "na"
indimin_ (float): is the minimum value of the indicator, for example for RSI it's 0.0, if the indicator (such CCI, MOM etc) doesn't have maximum value then use "na"
levels (array<float>): is the levels of the array for the horizontal lines. for example if you want horizontal lines at 30.0, and 70.0 then use array.from(30.0, 70.0). if no horizontal lines then use array.from(na)
precision (int): is the precision/nuber of decimals that is used to show indicator values, for example for RSI set it 2
xlocation (int): is end location of the indicator window, for example if xlocation = 0 window is created on the index of the last bar/candle
lnwidth (int): is the line width of the indicator lines
windowLabel (string): is the label of the window
Returns: none

Informacje o Wersji

v5

업데이트됨
drawIndicator(enabled, indicatorName, indicator1, indicator2, indicator3, indicatorcolors, period, indimax_, indimin_, levels, precision, xlocation, lnwidth, padding)
draws the realted indicator on the chart
Parameters:
enabled (bool): if it's enabled to show
indicatorName (string): is the indicator name as string such "RSI", "CCI" etc
indicator1 (float): is first indicator you want to show, such rsi(close, 14), mom(close, 10) etc
indicator2 (float): is second indicator you want to show, such -DI of DMI
indicator3 (float): is third indicator you want to show, such ADX of DMI
indicatorcolors (array<color>)
period (int): is the length of the window to show
indimax_ (float): is the maximum value of the indicator, for example for RSI it's 100.0, if the indicator (such CCI, MOM etc) doesn't have maximum value then use "na"
indimin_ (float): is the minimum value of the indicator, for example for RSI it's 0.0, if the indicator (such CCI, MOM etc)doesn't have maximum value then use "na"
levels (array<float>): is the levels of the array for the horizontal lines. for example if you want horizontal lines at 30.0, and 70.0 then use array.from(30.0, 70.0). if no horizontal lines then use array.from(na)
precision (int): is the precision/nuber of decimals that is used to show indicator values, for example for RSI set it 2
xlocation (int): is end location of the indicator window, for example if xlocation = 0 window is created on the index of the last bar/candle
lnwidth (int): is the line width of the indicator lines
padding (float): is the padding in percentage between chart and indicator window
Returns: none

Informacje o Wersji

v6

업데이트됨
drawIndicator(enabled, indicatorName, indicator1, indicator2, indicator3, indicator4, indicatorcolors, period, indimax_, indimin_, levels, precision, xlocation, lnwidth, padding)
draws the realted indicator on the chart
Parameters:
enabled (bool): if it's enabled to show
indicatorName (string): is the indicator name as string such "RSI", "CCI" etc
indicator1 (float): is first indicator you want to show, such rsi(close, 14), mom(close, 10) etc
indicator2 (float): is second indicator you want to show, such -DI of DMI
indicator3 (float): is third indicator you want to show, such ADX of DMI
indicator4 (float): is fourth indicator you want to show
indicatorcolors (array<color>)
period (int): is the length of the window to show
indimax_ (float): is the maximum value of the indicator, for example for RSI it's 100.0, if the indicator (such CCI, MOM etc) doesn't have maximum value then use "na"
indimin_ (float): is the minimum value of the indicator, for example for RSI it's 0.0, if the indicator (such CCI, MOM etc)doesn't have maximum value then use "na"
levels (array<float>): is the levels of the array for the horizontal lines. for example if you want horizontal lines at 30.0, and 70.0 then use array.from(30.0, 70.0). if no horizontal lines then use array.from(na)
precision (int): is the precision/nuber of decimals that is used to show indicator values, for example for RSI set it 2
xlocation (int): is end location of the indicator window, for example if xlocation = 0 window is created on the index of the last bar/candle
lnwidth (int): is the line width of the indicator lines
padding (float): is the padding in percentage between chart and indicator window
Returns: none

Informacje o Wersji

v10

업데이트됨
drawIndicator(enabled, indicatorName, indicator1, indicator2, indicator3, indicatorcolors, period, indimax_, indimin_, levels, precision, xlocation, lnwidth)
draws the realted indicator on the chart
Parameters:
enabled (bool): if it's enabled to show
indicatorName (string): is the indicator name as string such "RSI", "CCI" etc
indicator1 (float): is first indicator you want to show, such rsi(close, 14), mom(close, 10) etc
indicator2 (float): is second indicator you want to show, such -DI of DMI
indicator3 (float): is third indicator you want to show, such ADX of DMI
indicatorcolors (array<color>)
period (int): is the length of the window to show
indimax_ (float): is the maximum value of the indicator, for example for RSI it's 100.0, if the indicator (such CCI, MOM etc) doesn't have maximum value then use "na"
indimin_ (float): is the minimum value of the indicator, for example for RSI it's 0.0, if the indicator (such CCI, MOM etc)doesn't have maximum value then use "na"
levels (array<float>): is the levels of the array for the horizontal lines. for example if you want horizontal lines at 30.0, and 70.0 then use array.from(30.0, 70.0). if no horizontal lines then use array.from(na)
precision (int): is the precision/nuber of decimals that is used to show indicator values, for example for RSI set it 2
xlocation (int): is end location of the indicator window, for example if xlocation = 0 window is created on the index of the last bar/candle
lnwidth (int): is the line width of the indicator lines
Returns: none

Informacje o Wersji

v11

Informacje o Wersji

v12

Informacje o Wersji

v13

Informacje o Wersji

v14

Informacje o Wersji

v15

Informacje o Wersji

v16

Informacje o Wersji

v17

Informacje o Wersji

v18

Informacje o Wersji

v19

업데이트됨
drawIndicator(enabled, indicatorName, indicator1, indicator2, indicator3, indicatorcolors, period, indimax_, indimin_, levels, precision, xlocation, lnwidth)
Parameters:
enabled (bool)
indicatorName (string)
indicator1 (float)
indicator2 (float)
indicator3 (float)
indicatorcolors (array<color>)
period (int)
indimax_ (float)
indimin_ (float)
levels (array<float>)
precision (int)
xlocation (int)
lnwidth (int)

Informacje o Wersji

v20

Informacje o Wersji

v21

업데이트됨
drawIndicator(enabled, indicatorName, indicator1, indicator2, indicator3, indicatorcolors, period, indimax_, indimin_, levels, precision, xlocation, lnwidth)
draws the realted indicator on the chart
Parameters:
enabled (bool): if it's enabled to show
indicatorName (string): is the indicator name as string such "RSI", "CCI" etc
indicator1 (float): is first indicator you want to show, such rsi(close, 14), mom(close, 10) etc
indicator2 (float): is second indicator you want to show, such -DI of DMI
indicator3 (float): is third indicator you want to show, such ADX of DMI
indicatorcolors (array<color>)
period (int): is the length of the window to show
indimax_ (float): is the maximum value of the indicator, for example for RSI it's 100.0, if the indicator (such CCI, MOM etc) doesn't have maximum value then use "na"
indimin_ (float): is the minimum value of the indicator, for example for RSI it's 0.0, if the indicator (such CCI, MOM etc)doesn't have maximum value then use "na"
levels (array<float>): is the levels of the array for the horizontal lines. for example if you want horizontal lines at 30.0, and 70.0 then use array.from(30.0, 70.0). if no horizontal lines then use array.from(na)
precision (int): is the precision/nuber of decimals that is used to show indicator values, for example for RSI set it 2
xlocation (int): is end location of the indicator window, for example if xlocation = 0 window is created on the index of the last bar/candle
lnwidth (int): is the line width of the indicator lines
Returns: none

Informacje o Wersji

v22

업데이트됨
drawIndicator(enabled, indicatorName, indicator1, indicator2, indicator3, indicatorcolors, period, indimax_, indimin_, levels, xlocation, lnwidth)
draws the realted indicator on the chart
Parameters:
enabled (bool): if it's enabled to show
indicatorName (string): is the indicator name as string such "RSI", "CCI" etc
indicator1 (float): is first indicator you want to show, such rsi(close, 14), mom(close, 10) etc
indicator2 (float): is second indicator you want to show, such -DI of DMI
indicator3 (float): is third indicator you want to show, such ADX of DMI
indicatorcolors (array<color>)
period (int): is the length of the window to show
indimax_ (float): is the maximum value of the indicator, for example for RSI it's 100.0, if the indicator (such CCI, MOM etc) doesn't have maximum value then use "na"
indimin_ (float): is the minimum value of the indicator, for example for RSI it's 0.0, if the indicator (such CCI, MOM etc)doesn't have maximum value then use "na"
levels (array<float>): is the levels of the array for the horizontal lines. for example if you want horizontal lines at 30.0, and 70.0 then use array.from(30.0, 70.0). if no horizontal lines then use array.from(na)
xlocation (int): is end location of the indicator window, for example if xlocation = 0 window is created on the index of the last bar/candle
lnwidth (int): is the line width of the indicator lines
Returns: none

Informacje o Wersji

v23

Informacje o Wersji

v24

업데이트됨
drawIndicator(enabled, indicatorName, indicator1, indicatorcolor, period, indimax_, indimin_, levels, precision, xlocation, lnwidth)
draws the realted indicator on the chart
Parameters:
enabled (bool): if it's enabled to show
indicatorName (string): is the indicator name as string such "RSI", "CCI" etc
indicator1 (float): is first indicator you want to show, such rsi(close, 14), mom(close, 10) etc
indicatorcolor (color): is the color of indicator line
period (int): is the length of the window to show
indimax_ (float): is the maximum value of the indicator, for example for RSI it's 100.0, if the indicator (such CCI, MOM etc) doesn't have maximum value then use "na"
indimin_ (float): is the minimum value of the indicator, for example for RSI it's 0.0, if the indicator (such CCI, MOM etc)doesn't have maximum value then use "na"
levels (array<float>): is the levels of the array for the horizontal lines. for example if you want horizontal lines at 30.0, and 70.0 then use array.from(30.0, 70.0). if no horizontal lines then use array.from(na)
precision (int): is the precision/nuber of decimals that is used to show indicator values, for example for RSI set it 2
xlocation (int): is end location of the indicator window, for example if xlocation = 0 window is created on the index of the last bar/candle
lnwidth (int): is the line width of the indicator lines
Returns: none

Informacje o Wersji

v25

Informacje o Wersji

v26

더해짐
findIndiLoc()

getIndiLevel(indi, indimax, indimin, top, bottom)
Parameters:
indi (float)
indimax (float)
indimin (float)
top (float)
bottom (float)

findLowestTimeframe(timeframes)
Parameters:
timeframes (array<int>)

findLabelIndex(timeframes, lowestTimeframe)
Parameters:
timeframes (array<int>)
lowestTimeframe (int)

drawMultipleIndicators(enabled, title, windowNumber, indicatorValues, timeframes, indicatorColors, period, indimax_, indimin_, levels, precision, xlocation, lnwidth)
Parameters:
enabled (bool)
title (string)
windowNumber (int)
indicatorValues (array<float>)
timeframes (array<int>)
indicatorColors (array<color>)
period (int)
indimax_ (float)
indimin_ (float)
levels (array<float>)
precision (int)
xlocation (int)
lnwidth (int)

없어짐
drawIndicator(enabled, indicatorName, indicator1, indicatorcolor, period, indimax_, indimin_, levels, precision, xlocation, lnwidth)
draws the realted indicator on the chart

Informacje o Wersji

v27

없어짐
findIndiLoc()

Informacje o Wersji

v28

Biblioteka Pine

W duchu TradingView autor opublikował ten kod Pine jako bibliotekę open-source, aby inni programiści Pine z naszej społeczności mogli go ponownie wykorzystać. Brawa dla autora! Możesz używać tej biblioteki prywatnie lub w innych publikacjach open-source, ale ponowne wykorzystanie tego kodu w publikacjach podlega Zasadom Społeczności.

brasscoin

Wyłączenie odpowiedzialności

Informacje i publikacje przygotowane przez TradingView lub jego użytkowników, prezentowane na tej stronie, nie stanowią rekomendacji ani porad handlowych, inwestycyjnych i finansowych i nie powinny być w ten sposób traktowane ani wykorzystywane. Więcej informacji na ten temat znajdziesz w naszym Regulaminie.

Biblioteka Pine

brasscoin