Rozpocznij
PINE LIBRARY

TA

Od reees
Zaktualizowano
Library "TA"
General technical analysis functions

div_bull(pS, iS, cp_length_after, cp_length_before, pivot_length, lookback, no_broken, pW, iW, hidW, regW)
  Test for bullish divergence
  Parameters:
    pS: Price series (float)
    iS: Indicator series (float)
    cp_length_after: Bars after current (divergent) pivot low to be considered a valid pivot (optional int)
    cp_length_before: Bars before current (divergent) pivot low to be considered a valid pivot (optional int)
    pivot_length: Bars before and after prior pivot low to be considered valid pivot (optional int)
    lookback: Bars back to search for prior pivot low (optional int)
    no_broken: Flag to only consider divergence valid if the pivot-to-pivot trendline is unbroken (optional bool)
    pW: Weight of change in price, used in degree of divergence calculation (optional float)
    iW: Weight of change in indicator, used in degree of divergence calculation (optional float)
    hidW: Weight of hidden divergence, used in degree of divergence calculation (optional float)
    regW: Weight of regular divergence, used in degree of divergence calculation (optional float)
  Returns: [flag,degree,type,lx1,ly1,lx2,ly2]
flag = true if divergence exists (bool)
degree = degree (strength) of divergence (float)
type = 1 = regular, 2 = hidden (int)
lx1 = x coordinate 1 (int)
ly1 = y coordinate 1 (float)
lx2 = x coordinate 2 (int)
ly2 = y coordinate 2 (float)

div_bear(pS, iS, cp_length_after, cp_length_before, pivot_length, lookback, no_broken, pW, iW, hidW, regW)
  Test for bearish divergence
  Parameters:
    pS: Price series (float)
    iS: Indicator series (float)
    cp_length_after: Bars after current (divergent) pivot high to be considered a valid pivot (optional int)
    cp_length_before: Bars before current (divergent) pivot highto be considered a valid pivot (optional int)
    pivot_length: Bars before and after prior pivot high to be considered valid pivot (optional int)
    lookback: Bars back to search for prior pivot high (optional int)
    no_broken: Flag to only consider divergence valid if the pivot-to-pivot trendline is unbroken (optional bool)
    pW: Weight of change in price, used in degree of divergence calculation (optional float)
    iW: Weight of change in indicator, used in degree of divergence calculation (optional float)
    hidW: Weight of hidden divergence, used in degree of divergence calculation (optional float)
    regW: Weight of regular divergence, used in degree of divergence calculation (optional float)
  Returns: [flag,degree,type,lx1,ly1,lx2,ly2]
flag = true if divergence exists (bool)
degree = degree (strength) of divergence (float)
type = 1 = regular, 2 = hidden (int)
lx1 = x coordinate 1 (int)
ly1 = y coordinate 1 (float)
lx2 = x coordinate 2 (int)
ly2 = y coordinate 2 (float)
Informacje o Wersji
v2
Return absolute value of degree to handle series with negative values.
Informacje o Wersji
v3
- Added support for lookback # of pivots for div_bull() and div_bear()
- Fixed divergence degree calculation when indicator series has negative values
- Changed default pivot lengths for div_bull() and div_bear()

Updated:
div_bull(pS, iS, cp_length_after, cp_length_before, pivot_length, lookback, lookback_pivs, no_broken, pW, iW, hidW, regW)
  Test for bullish divergence
  Parameters:
    pS: Price series (float)
    iS: Indicator series (float)
    cp_length_after: Bars after current (divergent) pivot low to be considered a valid pivot (optional int)
    cp_length_before: Bars before current (divergent) pivot low to be considered a valid pivot (optional int)
    pivot_length: Bars before and after prior pivot low to be considered valid pivot (optional int)
    lookback: Bars back to search for prior pivot low (optional int)
    lookback_pivs: Pivots back to search for prior pivot low (optional int)
    no_broken: Flag to only consider divergence valid if the pivot-to-pivot trendline is unbroken (optional bool)
    pW: Weight of change in price, used in degree of divergence calculation (optional float)
    iW: Weight of change in indicator, used in degree of divergence calculation (optional float)
    hidW: Weight of hidden divergence, used in degree of divergence calculation (optional float)
    regW: Weight of regular divergence, used in degree of divergence calculation (optional float)
  Returns: [flag,degree,type,lx1,ly1,lx2,ly2]
flag = true if divergence exists (bool)
degree = degree (strength) of divergence (float)
type = 1 = regular, 2 = hidden (int)
lx1 = x coordinate 1 (int)
ly1 = y coordinate 1 (float)
lx2 = x coordinate 2 (int)
ly2 = y coordinate 2 (float)

div_bear(pS, iS, cp_length_after, cp_length_before, pivot_length, lookback, lookback_pivs, no_broken, pW, iW, hidW, regW)
  Test for bearish divergence
  Parameters:
    pS: Price series (float)
    iS: Indicator series (float)
    cp_length_after: Bars after current (divergent) pivot high to be considered a valid pivot (optional int)
    cp_length_before: Bars before current (divergent) pivot highto be considered a valid pivot (optional int)
    pivot_length: Bars before and after prior pivot high to be considered valid pivot (optional int)
    lookback: Bars back to search for prior pivot high (optional int)
    lookback_pivs: Pivots back to search for prior pivot high (optional int)
    no_broken: Flag to only consider divergence valid if the pivot-to-pivot trendline is unbroken (optional bool)
    pW: Weight of change in price, used in degree of divergence calculation (optional float)
    iW: Weight of change in indicator, used in degree of divergence calculation (optional float)
    hidW: Weight of hidden divergence, used in degree of divergence calculation (optional float)
    regW: Weight of regular divergence, used in degree of divergence calculation (optional float)
  Returns: [flag,degree,type,lx1,ly1,lx2,ly2]
flag = true if divergence exists (bool)
degree = degree (strength) of divergence (float)
type = 1 = regular, 2 = hidden (int)
lx1 = x coordinate 1 (int)
ly1 = y coordinate 1 (float)
lx2 = x coordinate 2 (int)
ly2 = y coordinate 2 (float)
Informacje o Wersji
v4
Changed divergence strength/degree calculation to use the angle of the divergence line divided by 90 degrees (as opposed to the % change in the indicator value). This will keep the unweighted strength value between 0 and 1 for the indicator portion of the calculation, which is desirable because different indicator series can have wildly different ranges.
Informacje o Wersji
v5
Added chk_prev_bar flag as an argument to the divergence checks, which will check for divergence using the indicator value from the prior bar. This is necessary in some cases where the indicator is using a different price source than the one passed into the divergence function.

Updated:
div_bull(pS, iS, chk_prev_bar, cp_length_after, cp_length_before, pivot_length, lookback, lookback_pivs, no_broken, pW, iW, hidW, regW)
  Test for bullish divergence
  Parameters:
    pS: Price series (float)
    iS: Indicator series (float)
    chk_prev_bar: Flag to check for divergence using the indicator value from the prior bar. This is necessary in some cases where the indicator is using a different price source than the one passed in pS.
    cp_length_after: Bars after current (divergent) pivot low to be considered a valid pivot (optional int)
    cp_length_before: Bars before current (divergent) pivot low to be considered a valid pivot (optional int)
    pivot_length: Bars before and after prior pivot low to be considered valid pivot (optional int)
    lookback: Bars back to search for prior pivot low (optional int)
    lookback_pivs: Pivots back to search for prior pivot low (optional int)
    no_broken: Flag to only consider divergence valid if the pivot-to-pivot trendline is unbroken (optional bool)
    pW: Weight of change in price, used in degree of divergence calculation (optional float)
    iW: Weight of change in indicator, used in degree of divergence calculation (optional float)
    hidW: Weight of hidden divergence, used in degree of divergence calculation (optional float)
    regW: Weight of regular divergence, used in degree of divergence calculation (optional float)
  Returns: [flag,degree,type,lx1,ly1,lx2,ly2]
flag = true if divergence exists (bool)
degree = degree (strength) of divergence (float)
type = 1 = regular, 2 = hidden (int)
lx1 = x coordinate 1 (int)
ly1 = y coordinate 1 (float)
lx2 = x coordinate 2 (int)
ly2 = y coordinate 2 (float)

div_bear(pS, iS, chk_prev_bar, cp_length_after, cp_length_before, pivot_length, lookback, lookback_pivs, no_broken, pW, iW, hidW, regW)
  Test for bearish divergence
  Parameters:
    pS: Price series (float)
    iS: Indicator series (float)
    chk_prev_bar: Flag to check for divergence using the indicator value from the prior bar. This is necessary in some cases where the indicator is using a different price source than the one passed in pS.
    cp_length_after: Bars after current (divergent) pivot high to be considered a valid pivot (optional int)
    cp_length_before: Bars before current (divergent) pivot highto be considered a valid pivot (optional int)
    pivot_length: Bars before and after prior pivot high to be considered valid pivot (optional int)
    lookback: Bars back to search for prior pivot high (optional int)
    lookback_pivs: Pivots back to search for prior pivot high (optional int)
    no_broken: Flag to only consider divergence valid if the pivot-to-pivot trendline is unbroken (optional bool)
    pW: Weight of change in price, used in degree of divergence calculation (optional float)
    iW: Weight of change in indicator, used in degree of divergence calculation (optional float)
    hidW: Weight of hidden divergence, used in degree of divergence calculation (optional float)
    regW: Weight of regular divergence, used in degree of divergence calculation (optional float)
  Returns: [flag,degree,type,lx1,ly1,lx2,ly2]
flag = true if divergence exists (bool)
degree = degree (strength) of divergence (float)
type = 1 = regular, 2 = hidden (int)
lx1 = x coordinate 1 (int)
ly1 = y coordinate 1 (float)
lx2 = x coordinate 2 (int)
ly2 = y coordinate 2 (float)
Informacje o Wersji
v6
When calculating the divergence strength on an indicator, Scale the X coordinates to a range similar to the Y scale (X and Y scales should be on the same order of magnitude for the angle value to be meaningful. e.g. if ΔY is 10,000,000 and ΔX is 12, the angle will always be very nearly 90 degrees, which makes for a meaningless value)
Informacje o Wersji
v7
Adjusted multiplier in iDelta() to use the average Y value rather than the difference of the two Y values.
Informacje o Wersji
v8
Now calculating divergence strength in terms of the standard deviation.
= Δ price/StDev + Δ indicator/stDev (multiplied by specified weights)
Informacje o Wersji
v9
Informacje o Wersji
v10
Changes to check more thoroughly for pivots on indicator series.

Updated:
div_bull(pS, iS, cp_length_after, cp_length_before, pivot_length, lookback, lookback_pivs, no_broken, pW, iW, hidW, regW)
  Test for bullish divergence
  Parameters:
    pS: Price series (float)
    iS: Indicator series (float)
    cp_length_after: Bars after current (divergent) pivot low to be considered a valid pivot (optional int)
    cp_length_before: Bars before current (divergent) pivot low to be considered a valid pivot (optional int)
    pivot_length: Bars before and after prior pivot low to be considered valid pivot (optional int)
    lookback: Bars back to search for prior pivot low (optional int)
    lookback_pivs: Pivots back to search for prior pivot low (optional int)
    no_broken: Flag to only consider divergence valid if the pivot-to-pivot trendline is unbroken (optional bool)
    pW: Weight of change in price, used in degree of divergence calculation (optional float)
    iW: Weight of change in indicator, used in degree of divergence calculation (optional float)
    hidW: Weight of hidden divergence, used in degree of divergence calculation (optional float)
    regW: Weight of regular divergence, used in degree of divergence calculation (optional float)
  Returns: [flag,degree,type,lx1,ly1,lx2,ly2]
flag = true if divergence exists (bool)
degree = degree (strength) of divergence (float)
type = 1 = regular, 2 = hidden (int)
lx1 = x coordinate 1 (int)
ly1 = y coordinate 1 (float)
lx2 = x coordinate 2 (int)
ly2 = y coordinate 2 (float)

div_bear(pS, iS, cp_length_after, cp_length_before, pivot_length, lookback, lookback_pivs, no_broken, pW, iW, hidW, regW)
  Test for bearish divergence
  Parameters:
    pS: Price series (float)
    iS: Indicator series (float)
    cp_length_after: Bars after current (divergent) pivot high to be considered a valid pivot (optional int)
    cp_length_before: Bars before current (divergent) pivot highto be considered a valid pivot (optional int)
    pivot_length: Bars before and after prior pivot high to be considered valid pivot (optional int)
    lookback: Bars back to search for prior pivot high (optional int)
    lookback_pivs: Pivots back to search for prior pivot high (optional int)
    no_broken: Flag to only consider divergence valid if the pivot-to-pivot trendline is unbroken (optional bool)
    pW: Weight of change in price, used in degree of divergence calculation (optional float)
    iW: Weight of change in indicator, used in degree of divergence calculation (optional float)
    hidW: Weight of hidden divergence, used in degree of divergence calculation (optional float)
    regW: Weight of regular divergence, used in degree of divergence calculation (optional float)
  Returns: [flag,degree,type,lx1,ly1,lx2,ly2]
flag = true if divergence exists (bool)
degree = degree (strength) of divergence (float)
type = 1 = regular, 2 = hidden (int)
lx1 = x coordinate 1 (int)
ly1 = y coordinate 1 (float)
lx2 = x coordinate 2 (int)
ly2 = y coordinate 2 (float)
Informacje o Wersji
v11
div_bull() and div_bear() - adjusted indicator pivot checking to be more inclusive.
Informacje o Wersji
v12
Added function for validating harmonic XABCD patterns: harmonic_validate_xabcd()

Added:
harmonic_validate_xabcd(xX, xY, aX, aY, bX, bY, cX, cY, dX, dY, pErr, pAsym, pivot_length, gart, bat, bfly, crab)
  Validate harmonic XABCD pattern
  Parameters:
    xX: X coordinate of point X (int)
    xY: Y coordinate of point X (float)
    aX: X coordinate of point A (int)
    aY: Y coordinate of point A (float)
    bX: X coordinate of point B (int)
    bY: Y coordinate of point B (float)
    cX: X coordinate of point C (int)
    cY: Y coordinate of point C (float)
    dX: X coordinate of point D (int)
    dY: Y coordinate of point D (float)
    pErr: Acceptable percent error of leg ratios (does not apply to legs defined within a range) (float)
    pAsym: Acceptable percent asymmetry of leg ΔX (each leg tested against average ΔX of prior legs) (float)
    pivot_length: Bars before and after prior pivot high to be considered valid pivot (optional int)
    gart: Flag to validate Gartley pattern (bool)
    bat: Flag to validate Bat pattern (bool)
    bfly: Flag to validate Butterfly pattern (bool)
    crab: Flag to validate Crab pattern (bool)
  Returns: [flag,t1,t2,t3,t4]
flag = true if valid harmonic
t1 = true if valid gartley
t2 = true if valid bat
t3 = true if valid butterfly
t4 = true if valid crab
Informacje o Wersji
v13

Added pattern_xabcd() - determine if an XABCD pattern has just completed.

Added:
pattern_xabcd(x_is_low, pivot_length, source)
  Determine if an XABCD pattern has just completed (i.e. point D is on the previous bar)
  Parameters:
    x_is_low: Flag to determine if point X is a low pivot, i.e. bullish pattern (bool, dft = true)
    pivot_length: Number of bars before and after a valid pivot (int, dft = 5)
    source: Source series (float, dft = na, will use high and low series)
  Returns: [flag,xx,xy,ax,ay,bx,by,cx,cy,dx,dy]
flag = true if valid XABCD pattern completed on previous bar
xx = X coordinate of point X (int)
xy = Y coordinate of point X (float)
ax = X coordinate of point A (int)
ay = Y coordinate of point A (float)
bx = X coordinate of point B (int)
by = Y coordinate of point B (float)
cx = X coordinate of point C (int)
cy = Y coordinate of point C (float)
dx = X coordinate of point D (int)
dy = Y coordinate of point D (float)
Informacje o Wersji
v14

Added:
pat_xabcd(x_is_low, pivot_length, source)
  Determine if an XABCD pattern has just completed (i.e. point D is on the previous bar)
  Parameters:
    x_is_low: Flag to determine if point X is a low pivot, i.e. bullish pattern (bool, dft = true)
    pivot_length: Number of bars before and after a valid pivot (int, dft = 5)
    source: Source series (float, dft = na, will use high and low series)
  Returns: [flag,xx,xy,ax,ay,bx,by,cx,cy,dx,dy]
flag = true if valid XABCD pattern completed on previous bar
xx = X coordinate of point X (int)
xy = Y coordinate of point X (float)
ax = X coordinate of point A (int)
ay = Y coordinate of point A (float)
bx = X coordinate of point B (int)
by = Y coordinate of point B (float)
cx = X coordinate of point C (int)
cy = Y coordinate of point C (float)
dx = X coordinate of point D (int)
dy = Y coordinate of point D (float)

Removed:
pattern_xabcd(x_is_low, pivot_length, source)
  Determine if an XABCD pattern has just completed (i.e. point D is on the previous bar)
Informacje o Wersji
v15
Fixed point D validation for harmonic XABCD pattern
Informacje o Wersji
v16
Fixed harmonic XABCD ΔX symmetry validation
Informacje o Wersji
v17

Added:
harmonic_xabcd_validate(xX, xY, aX, aY, bX, bY, cX, cY, dX, dY, pErr, pAsym, pivot_length, gart, bat, bfly, crab)
  Validate harmonic XABCD pattern
  Parameters:
    xX: X coordinate of point X (int)
    xY: Y coordinate of point X (float)
    aX: X coordinate of point A (int)
    aY: Y coordinate of point A (float)
    bX: X coordinate of point B (int)
    bY: Y coordinate of point B (float)
    cX: X coordinate of point C (int)
    cY: Y coordinate of point C (float)
    dX: X coordinate of point D (int)
    dY: Y coordinate of point D (float)
    pErr: Acceptable percent error of leg ratios (does not apply to legs defined within a range) (float)
    pAsym: Acceptable percent asymmetry of leg ΔX (each leg tested against average ΔX of prior legs) (float)
    pivot_length: Bars before and after prior pivot high to be considered valid pivot (optional int)
    gart: Flag to validate Gartley pattern (bool)
    bat: Flag to validate Bat pattern (bool)
    bfly: Flag to validate Butterfly pattern (bool)
    crab: Flag to validate Crab pattern (bool)
  Returns: [flag,t1,t2,t3,t4]
flag = true if valid harmonic
t1 = true if valid gartley
t2 = true if valid bat
t3 = true if valid butterfly
t4 = true if valid crab

harmonic_xabcd_prz(type, xY, aY, bY, cY)
  Get the potential reversal zone (PRZ) levels of a harmonic XABCD pattern
  Parameters:
    type: Harmonic pattern type (int - 1 = Gartley, 2 = Bat, 3 = Butterfly, 4 = Crab)
    xY: Y coordinate of point X (float)
    aY: Y coordinate of point A (float)
    bY: Y coordinate of point B (float)
    cY: Y coordinate of point C (float)
  Returns: [bc_u, bc_l, xa_u, xa_l]
bc_u = nearest BC retracement/extension level (nearest to point C)
bc_l = farthest BC retracement/extension level (nearest to point C)
xa_u = nearest XA retracement/extension level (or the only XA level, if applicable)
xa_l = farthest XA retracement/extension level (or na if not applicable)

Removed:
harmonic_validate_xabcd(xX, xY, aX, aY, bX, bY, cX, cY, dX, dY, pErr, pAsym, pivot_length, gart, bat, bfly, crab)
  Validate harmonic XABCD pattern
Informacje o Wersji
v18
Fixed harmonic retracement validation
Informacje o Wersji
v19

Added:
harmonic_xabcd_validateIncomplete(xX, xY, aX, aY, bX, bY, cX, cY, pErr, pAsym, pivot_length, gart, bat, bfly, crab)
  Validate the first 3 legs of a harmonic XABCD pattern
  Parameters:
    xX: X coordinate of point X (int)
    xY: Y coordinate of point X (float)
    aX: X coordinate of point A (int)
    aY: Y coordinate of point A (float)
    bX: X coordinate of point B (int)
    bY: Y coordinate of point B (float)
    cX: X coordinate of point C (int)
    cY: Y coordinate of point C (float)
    pErr: Acceptable percent error of leg ratios (does not apply to legs defined within a range) (float)
    pAsym: Acceptable percent asymmetry of leg ΔX (each leg tested against average ΔX of prior legs) (float)
    pivot_length: Bars before and after prior pivot high to be considered valid pivot (optional int)
    gart: Flag to validate Gartley pattern (bool)
    bat: Flag to validate Bat pattern (bool)
    bfly: Flag to validate Butterfly pattern (bool)
    crab: Flag to validate Crab pattern (bool)
  Returns: [flag,t1,t2,t3,t4]
flag = true if valid harmonic
t1 = true if valid gartley
t2 = true if valid bat
t3 = true if valid butterfly
t4 = true if valid crab
Informacje o Wersji
v20
Fixed bug with pat_axbcd() algorithm, checking wrong pivot looking for point C in bearish patterns.
Informacje o Wersji
v21
Fixed bug in pat_xabcd() where intermediate low wasn't being detected between points C and D
Informacje o Wersji
v22

Added:
harmonic_xabcd_przClosest(l1, l2, l3, l4)
  Get the confluent PRZ levels (i.e. the two closest PRZ levels)
Order of arguments does not matter
  Parameters:
    l1: level 1 (float)
    l2: level 2 (float)
    l3: level 3 (float)
    l4: level 4 (optional, float)
  Returns: [lL,lH]
lL = lower confluent PRZ level
lH = higher confluent PRZ level
Informacje o Wersji
v23

Added:
success(entry, stop, t1, t2)
  Determine if trade is successful
  Parameters:
    entry: Entry bar index (int)
    stop: Stop level (float)
    t1: Target 1 level (float)
    t2: Target 2 level (float)
  Returns: [t1Hit,t2Hit,t1x,t1y,t2x,t2y]
Informacje o Wersji
v24

Added:
harmonic_xabcd_rAndE(type, l, l1, l2)
  Get the ratio of two pattern legs, and the percent error from the theoretical harmonic ratio
Order of arguments does not matter
  Parameters:
    type: Harmonic pattern type (int - 1 = Gartley, 2 = Bat, 3 = Butterfly, 4 = Crab)
    l: Leg ID ("xab", "abc", "bcd", or "xad") (string)
    l1: Line 1 height (float)
    l2: Line 2 height (float)
  Returns: [r,e]
Informacje o Wersji
v25

Added:
harmonic_xabcd_przRange()
  Get upper and lower PRZ levels

harmonic_xabcd_eD()
  Measure closeness of D to either of the two closest PRZ levels, relative to height of the XA leg

przScore()
  Measure the closeness of the two closest PRZ levels, relative to the height of the XA leg

harmonic_xabcd_eAvg()
  Get the avg retracement ratio % error

harmonic_xabcd_targets()
  Get target level

pat_xabcd_asym()
  Get the avg asymmetry %
Informacje o Wersji
v26

Added:
harmonic_xabcd_przScore()
  Measure the closeness of the two closest PRZ levels, relative to the height of the XA leg

Removed:
przScore()
  Measure the closeness of the two closest PRZ levels, relative to the height of the XA leg
Informacje o Wersji
v27

Updated:
pat_xabcd(x_is_low, pivot_length, source, conf_length)
  Determine if an XABCD pattern has just completed (i.e. point D is on the previous bar)
  Parameters:
    x_is_low: Flag to determine if point X is a low pivot, i.e. bullish pattern (bool, dft = true)
    pivot_length: Number of bars before and after a valid pivot (int, dft = 5)
    source: Source series (float, dft = na, will use high and low series)
    conf_length: Number of trailing bars after pivot point D to confirm a valid pattern (int, dft = 1)
  Returns: [flag,xx,xy,ax,ay,bx,by,cx,cy,dx,dy]
flag = true if valid XABCD pattern completed on previous bar
xx = X coordinate of point X (int)
xy = Y coordinate of point X (float)
ax = X coordinate of point A (int)
ay = Y coordinate of point A (float)
bx = X coordinate of point B (int)
by = Y coordinate of point B (float)
cx = X coordinate of point C (int)
cy = Y coordinate of point C (float)
dx = X coordinate of point D (int)
dy = Y coordinate of point D (float)
Informacje o Wersji
v28
Informacje o Wersji
v29
Informacje o Wersji
v30

Added:
harmonic_xabcd_score()
  Get score values for a pattern
Informacje o Wersji
v31
Added Shark and Cypher XABCD patterns

Updated:
harmonic_xabcd_validate(xX, xY, aX, aY, bX, bY, cX, cY, dX, dY, pErr, pAsym, pivot_length, gart, bat, bfly, crab, shark, cyph)
  Validate harmonic XABCD pattern
  Parameters:
    xX: X coordinate of point X (int)
    xY: Y coordinate of point X (float)
    aX: X coordinate of point A (int)
    aY: Y coordinate of point A (float)
    bX: X coordinate of point B (int)
    bY: Y coordinate of point B (float)
    cX: X coordinate of point C (int)
    cY: Y coordinate of point C (float)
    dX: X coordinate of point D (int)
    dY: Y coordinate of point D (float)
    pErr: Acceptable percent error of leg ratios (does not apply to legs defined within a range) (float)
    pAsym: Acceptable percent asymmetry of leg ΔX (each leg tested against average ΔX of prior legs) (float)
    pivot_length: Bars before and after prior pivot high to be considered valid pivot (optional int)
    gart: Flag to validate Gartley pattern (bool)
    bat: Flag to validate Bat pattern (bool)
    bfly: Flag to validate Butterfly pattern (bool)
    crab: Flag to validate Crab pattern (bool)
    shark: Flag to validate Shark pattern (bool)
    cyph: Flag to validate Cypher pattern (bool)
  Returns: [flag,t1,t2,t3,t4,t5,t6]
flag = true if valid harmonic
t1 = true if valid gartley
t2 = true if valid bat
t3 = true if valid butterfly
t4 = true if valid crab
t5 = true if valid shark
t6 = true if valid cypher

harmonic_xabcd_validateIncomplete(xX, xY, aX, aY, bX, bY, cX, cY, pErr, pAsym, pivot_length, gart, bat, bfly, crab, shark, cyph)
  Validate the first 3 legs of a harmonic XABCD pattern
  Parameters:
    xX: X coordinate of point X (int)
    xY: Y coordinate of point X (float)
    aX: X coordinate of point A (int)
    aY: Y coordinate of point A (float)
    bX: X coordinate of point B (int)
    bY: Y coordinate of point B (float)
    cX: X coordinate of point C (int)
    cY: Y coordinate of point C (float)
    pErr: Acceptable percent error of leg ratios (does not apply to legs defined within a range) (float)
    pAsym: Acceptable percent asymmetry of leg ΔX (each leg tested against average ΔX of prior legs) (float)
    pivot_length: Bars before and after prior pivot high to be considered valid pivot (optional int)
    gart: Flag to validate Gartley pattern (bool)
    bat: Flag to validate Bat pattern (bool)
    bfly: Flag to validate Butterfly pattern (bool)
    crab: Flag to validate Crab pattern (bool)
    shark: Flag to validate Shark pattern (bool)
    cyph: Flag to validate Cypher pattern (bool)
  Returns: [flag,t1,t2,t3,t4]
flag = true if valid harmonic
t1 = true if valid gartley
t2 = true if valid bat
t3 = true if valid butterfly
t4 = true if valid crab
t5 = true if valid shark
t6 = true if valid cypher
Informacje o Wersji
v32

Updated:
harmonic_xabcd_przScore()
  Measure the closeness of the two closest PRZ levels, relative to the height of the XA leg
Informacje o Wersji
v33

Added:
harmonic_xabcd_fibDispTxt()
  Get fib ratio display text
Informacje o Wersji
v34

Added:
harmonic_xabcd_symbol()
  Get pattern symbol
Informacje o Wersji
v35

Added:
harmonic_xabcd_scoreTot()
  Get total weighted score value for a pattern
Informacje o Wersji
v36

Removed:
harmonic_xabcd_scoreTot()
  Get total weighted score value for a pattern

harmonic_xabcd_fibDispTxt()
  Get fib ratio display text

harmonic_xabcd_symbol()
  Get pattern symbol
Informacje o Wersji
v37

Added:
harmonic_xabcd_scoreTot()
  Get pattern's total weighted score
Informacje o Wersji
v38

Added:
harmonic_xabcd_fibDispTxt()
  Get fib ratio display text

harmonic_xabcd_symbol()
  Get pattern symbol
Informacje o Wersji
v39
Informacje o Wersji
v40
Informacje o Wersji
v41
Informacje o Wersji
v42

Added:
harmonic_xabcd_stop()
  Get stop level
Informacje o Wersji
v43
Fixed bug with cypher validation of point D (retracement of XC, not XA)
Informacje o Wersji
v44
Informacje o Wersji
v45
Removed redundant "==true" comparisons
Informacje o Wersji
v46
Fixed bug with cypher PRZ level
Informacje o Wersji
v47

Added:
pat_xabcd_avgDev()
  Get the average % deviation of an XABCD pattern
Informacje o Wersji
v48
Informacje o Wersji
v49
Testing
Informacje o Wersji
v50
Testing
Informacje o Wersji
v51

Added:
pat_xabcd_validate(xX, xY, aX, aY, bX, bY, cX, cY, dX, dY, pErr, pAsym)
  Validate custom XABCD pattern
  Parameters:
    xX: X coordinate of point X (int)
    xY: Y coordinate of point X (float)
    aX: X coordinate of point A (int)
    aY: Y coordinate of point A (float)
    bX: X coordinate of point B (int)
    bY: Y coordinate of point B (float)
    cX: X coordinate of point C (int)
    cY: Y coordinate of point C (float)
    dX: X coordinate of point D (int)
    dY: Y coordinate of point D (float)
    pErr: Acceptable percent error of leg ratios (does not apply to legs defined within a range) (float)
    pAsym: Acceptable percent asymmetry of leg ΔX (each leg tested against average ΔX of prior legs) (float)
  Returns: TRUE if pattern is valid

pat_xabcd_validateIncomplete(xX, xY, aX, aY, bX, bY, cX, cY, pErr, pAsym)
  Validate the first 3 legs of a custom XABCD pattern
  Parameters:
    xX: X coordinate of point X (int)
    xY: Y coordinate of point X (float)
    aX: X coordinate of point A (int)
    aY: Y coordinate of point A (float)
    bX: X coordinate of point B (int)
    bY: Y coordinate of point B (float)
    cX: X coordinate of point C (int)
    cY: Y coordinate of point C (float)
    pErr: Acceptable percent error of leg ratios (does not apply to legs defined within a range) (float)
    pAsym: Acceptable percent asymmetry of leg ΔX (each leg tested against average ΔX of prior legs) (float)
  Returns: TRUE if first 3 legs are valid

pat_xabcd_prz(xY, aY, bY, cY)
  Get the potential reversal zone (PRZ) levels of a custom XABCD pattern
  Parameters:
    xY: Y coordinate of point X (float)
    aY: Y coordinate of point A (float)
    bY: Y coordinate of point B (float)
    cY: Y coordinate of point C (float)
  Returns: [xad_lvl,bcd_lvl,xcd_lvl]
Informacje o Wersji
v52

Updated:
harmonic_xabcd_eAvg()
  Get the avg retracement ratio % error
Informacje o Wersji
v53
Fixed bug with success(), extra checks on entry bar
Informacje o Wersji
v54

Added:
tradeClosed()
  Determine if Target or Stop was hit on the current bar
Informacje o Wersji
v55
Bug fix for closed trade check
Informacje o Wersji
v56
Bug fix for closed trade check
Informacje o Wersji
v57

Updated:
pat_xabcd(x_is_low, pivot_length, source, conf_length, incomplete)
  Determine if an XABCD pattern has just completed (i.e. point D is on the previous bar)
  Parameters:
    x_is_low: Flag to determine if point X is a low pivot, i.e. bullish pattern (bool, dft = true)
    pivot_length: Number of bars before and after a valid pivot (int, dft = 5)
    source: Source series (float, dft = na, will use high and low series)
    conf_length: Number of trailing bars after pivot point D to confirm a valid pattern (int, dft = 1)
    incomplete: Flag to return an incomplete XABC pattern (bool, dft = false)
  Returns: [flag,xx,xy,ax,ay,bx,by,cx,cy,dx,dy]
flag = true if valid XABCD pattern completed on previous bar
xx = X coordinate of point X (int)
xy = Y coordinate of point X (float)
ax = X coordinate of point A (int)
ay = Y coordinate of point A (float)
bx = X coordinate of point B (int)
by = Y coordinate of point B (float)
cx = X coordinate of point C (int)
cy = Y coordinate of point C (float)
dx = X coordinate of point D (int)
dy = Y coordinate of point D (float)
Informacje o Wersji
v58
Short circuit incomplete XABCD pattern search
Informacje o Wersji
v59

Updated:
harmonic_xabcd_przRange()
  Get upper and lower PRZ levels
Informacje o Wersji
v60

Added:
harmonic_xabcd_entry()
Informacje o Wersji
v61

Added:
xabcd_entryHit()
  Determine if entry level was reached. Assumes pattern is active/not timed out.
Informacje o Wersji
v62
Updated przClosest check to exclude values of 0 (only used when actual retracement value < 0)
Informacje o Wersji
v63
backed out last change
Informacje o Wersji
v64
test
Informacje o Wersji
v65
dont allow entry value < 0
Informacje o Wersji
v66
Updated to use latest version of Fib script (improved efficiency for precise fibs)
Informacje o Wersji
v67
test

Updated:
pat_xabcd(x_is_low, pivot_length, source, conf_length, incomplete)
  Determine if an XABCD pattern has just completed (i.e. point D is on the previous bar)
  Parameters:
    x_is_low: Flag to determine if point X is a low pivot, i.e. bullish pattern (bool, dft = true)
    pivot_length: Number of bars before and after a valid pivot (int, dft = 5)
    source: Source series (float, dft = na, will use high and low series)
    conf_length: Number of trailing bars after pivot point D to confirm a valid pattern (int, dft = 1)
    incomplete: Flag to return an incomplete XABC pattern (bool, dft = false)
  Returns: [flag,xx,xy,ax,ay,bx,by,cx,cy,dx,dy]
flag = true if valid XABCD pattern completed on previous bar
xx = X coordinate of point X (int)
xy = Y coordinate of point X (float)
ax = X coordinate of point A (int)
ay = Y coordinate of point A (float)
bx = X coordinate of point B (int)
by = Y coordinate of point B (float)
cx = X coordinate of point C (int)
cy = Y coordinate of point C (float)
dx = X coordinate of point D (int)
dy = Y coordinate of point D (float)
Informacje o Wersji
v68
Reverted test changes

Updated:
pat_xabcd(x_is_low, pivot_length, source, conf_length, incomplete)
  Determine if an XABCD pattern has just completed (i.e. point D is on the previous bar)
  Parameters:
    x_is_low: Flag to determine if point X is a low pivot, i.e. bullish pattern (bool, dft = true)
    pivot_length: Number of bars before and after a valid pivot (int, dft = 5)
    source: Source series (float, dft = na, will use high and low series)
    conf_length: Number of trailing bars after pivot point D to confirm a valid pattern (int, dft = 1)
    incomplete: Flag to return an incomplete XABC pattern (bool, dft = false)
  Returns: [flag,xx,xy,ax,ay,bx,by,cx,cy,dx,dy]
flag = true if valid XABCD pattern completed on previous bar
xx = X coordinate of point X (int)
xy = Y coordinate of point X (float)
ax = X coordinate of point A (int)
ay = Y coordinate of point A (float)
bx = X coordinate of point B (int)
by = Y coordinate of point B (float)
cx = X coordinate of point C (int)
cy = Y coordinate of point C (float)
dx = X coordinate of point D (int)
dy = Y coordinate of point D (float)
Informacje o Wersji
v69
Test allowing divergence checks with pivot length of 0
Informacje o Wersji
v70

Updated:
pat_xabcd(x_is_low, pivot_length, source, conf_length, incomplete, inc_skipC)
  Determine if an XABCD pattern has just completed (i.e. point D is on the previous bar)
  Parameters:
    x_is_low: Flag to determine if point X is a low pivot, i.e. bullish pattern (bool, dft = true)
    pivot_length: Number of bars before and after a valid pivot (int, dft = 5)
    source: Source series (float, dft = na, will use high and low series)
    conf_length: Number of trailing bars after pivot point D to confirm a valid pattern (int, dft = 1)
    incomplete: Flag to return an incomplete XABC pattern (bool, dft = false)
    inc_skipC: skip incomplete patterns whose point C is at or before this bar index (to avoid returning the same pattern on consecutive bars)
  Returns: [flag,xx,xy,ax,ay,bx,by,cx,cy,dx,dy]
flag = true if valid XABCD pattern completed on previous bar
xx = X coordinate of point X (int)
xy = Y coordinate of point X (float)
ax = X coordinate of point A (int)
ay = Y coordinate of point A (float)
bx = X coordinate of point B (int)
by = Y coordinate of point B (float)
cx = X coordinate of point C (int)
cy = Y coordinate of point C (float)
dx = X coordinate of point D (int)
dy = Y coordinate of point D (float)
Informacje o Wersji
v71
Informacje o Wersji
v72

Updated:
pat_xabcd(x_is_low, pivot_length, source, conf_length, incomplete, inc_skipC)
  Determine if an XABCD pattern has just completed (i.e. point D is on the previous bar)
  Parameters:
    x_is_low: Flag to determine if point X is a low pivot, i.e. bullish pattern (bool, dft = true)
    pivot_length: Number of bars before and after a valid pivot (int, dft = 5)
    source: Source series (float, dft = na, will use high and low series)
    conf_length: Number of trailing bars after pivot point D to confirm a valid pattern (int, dft = 1)
    incomplete: Flag to return an incomplete XABC pattern (bool, dft = false)
    inc_skipC: skip incomplete patterns whose point C is at this bar index (to avoid returning the same pattern on consecutive bars)
  Returns: [flag,xx,xy,ax,ay,bx,by,cx,cy,dx,dy]
flag = true if valid XABCD pattern completed on previous bar
xx = X coordinate of point X (int)
xy = Y coordinate of point X (float)
ax = X coordinate of point A (int)
ay = Y coordinate of point A (float)
bx = X coordinate of point B (int)
by = Y coordinate of point B (float)
cx = X coordinate of point C (int)
cy = Y coordinate of point C (float)
dx = X coordinate of point D (int)
dy = Y coordinate of point D (float)
Informacje o Wersji
v73
Informacje o Wersji
v74
Informacje o Wersji
v75

Updated:
pat_xabcd(x_is_low, pivot_length, source, conf_length, incomplete)
  Determine if an XABCD pattern has just completed (i.e. point D is on the previous bar)
  Parameters:
    x_is_low: Flag to determine if point X is a low pivot, i.e. bullish pattern (bool, dft = true)
    pivot_length: Number of bars before and after a valid pivot (int, dft = 5)
    source: Source series (float, dft = na, will use high and low series)
    conf_length: Number of trailing bars after pivot point D to confirm a valid pattern (int, dft = 1)
    incomplete: Flag to return an incomplete XABC pattern (bool, dft = false)
  Returns: [flag,xx,xy,ax,ay,bx,by,cx,cy,dx,dy]
flag = true if valid XABCD pattern completed on previous bar
xx = X coordinate of point X (int)
xy = Y coordinate of point X (float)
ax = X coordinate of point A (int)
ay = Y coordinate of point A (float)
bx = X coordinate of point B (int)
by = Y coordinate of point B (float)
cx = X coordinate of point C (int)
cy = Y coordinate of point C (float)
dx = X coordinate of point D (int)
dy = Y coordinate of point D (float)
Informacje o Wersji
v76

Updated:
tradeClosed(eX, eY, stop, t1h, t2h, t1, t2)
  Determine if Target or Stop was hit on the current bar
  Parameters:
    eX
    eY
    stop
    t1h
    t2h
    t1
    t2
Informacje o Wersji
v77

Updated:
pat_xabcd(x_is_low, pivot_length, source, conf_length, incomplete)
  Determine if an XABCD pattern has just completed (i.e. point D is on the previous bar)
  Parameters:
    x_is_low: Flag to determine if point X is a low pivot, i.e. bullish pattern (bool, dft = true)
    pivot_length: Number of bars before and after a valid pivot (int, dft = 5)
    source: Source series (float, dft = na, will use high and low series)
    conf_length: Number of trailing bars after pivot point D to confirm a valid pattern (int, dft = 1)
    incomplete: Flag to return an incomplete XABC pattern (bool, dft = false)
  Returns: [flag, x, a, b, c, d]
flag = true if valid XABCD pattern completed on previous bar
x = point X
a = point A
b = point B
c = point C
d = point D
Informacje o Wersji
v78
test revert d.y to 0.0
Informacje o Wersji
v79
Reverted changes using point object for pat_xabcd()

Updated:
pat_xabcd(x_is_low, pivot_length, source, conf_length, incomplete)
  Determine if an XABCD pattern has just completed (i.e. point D is on the previous bar)
  Parameters:
    x_is_low: Flag to determine if point X is a low pivot, i.e. bullish pattern (bool, dft = true)
    pivot_length: Number of bars before and after a valid pivot (int, dft = 5)
    source: Source series (float, dft = na, will use high and low series)
    conf_length: Number of trailing bars after pivot point D to confirm a valid pattern (int, dft = 1)
    incomplete: Flag to return an incomplete XABC pattern (bool, dft = false)
  Returns: [flag,xx,xy,ax,ay,bx,by,cx,cy,dx,dy]
flag = true if valid XABCD pattern completed on previous bar
xx = X coordinate of point X (int)
xy = Y coordinate of point X (float)
ax = X coordinate of point A (int)
ay = Y coordinate of point A (float)
bx = X coordinate of point B (int)
by = Y coordinate of point B (float)
cx = X coordinate of point C (int)
cy = Y coordinate of point C (float)
dx = X coordinate of point D (int)
dy = Y coordinate of point D (float)
Informacje o Wersji
v80
Add stop flag to tradeClosed()
Informacje o Wersji
v81

Added:
test_cd(cd, bc, xa, xc, ad, pErr, p_types)
  Validate CD leg of XABCD
  Parameters:
    cd
    bc
    xa
    xc
    ad
    pErr
    p_types
Informacje o Wersji
v82

Added:
pat_xabcdIncomplete(x_is_low, pivot_length, source, conf_length)
  Determine if an XABCD pattern is in progress (point C was just confirmed)
  Parameters:
    x_is_low: Flag to determine if point X is a low pivot, i.e. bullish M pattern (bool, dft = true)
    pivot_length: Number of bars before and after a valid pivot (int, dft = 5)
    source: Source series (float, dft = na, will use high and low series)
    conf_length: Number of trailing bars after pivot point D to confirm a valid pattern (int, dft = 1)
  Returns: [flag,xx,xy,ax,ay,bx,by,cx,cy]
flag = true if valid XABC pattern completed on bar_index[conf_length]
xx = X coordinate of point X (int)
xy = Y coordinate of point X (float)
ax = X coordinate of point A (int)
ay = Y coordinate of point A (float)
bx = X coordinate of point B (int)
by = Y coordinate of point B (float)
cx = X coordinate of point C (int)
cy = Y coordinate of point C (float)
dx = X coordinate of point D (int)
dy = Y coordinate of point D (float)
Informacje o Wersji
v83

Added:
pat_xabcd_testSym(xax, abx, bcx, cdx, pAsym)
  Validate ΔX symmetry of XABCD pattern
  Parameters:
    xax
    abx
    bcx
    cdx
    pAsym
Informacje o Wersji
v84
updated pat_xabcdIncomplete()
Informacje o Wersji
v85
pat_xabcdIncomplete() bug fix
Divergenceharmonic_patternsstatisticstechindicatorxabcd

Biblioteka Pine

W prawdziwym duchu TradingView autor opublikował ten kod Pine jako bibliotekę typu open source, aby inni programiści Pine z naszej społeczności mogli go ponownie wykorzystać. Pozdrowienia dla autora! Możesz używać tej biblioteki prywatnie lub w innych publikacjach typu open source, ale ponowne użycie tego kodu w publikacji podlega Zasadom Regulaminu.

reees
Również na:

Wyłączenie odpowiedzialności

Informacje i publikacje przygotowane przez TradingView lub jego użytkowników, prezentowane na tej stronie, nie stanowią rekomendacji ani porad handlowych, inwestycyjnych i finansowych i nie powinny być w ten sposób traktowane ani wykorzystywane. Więcej informacji na ten temat znajdziesz w naszym Regulaminie.