Setup Finder by cryptokazancevEnglish
The indicator helps find setups based on Smart Money instruments
What OB and FVG Are
Order Blocks (OB) are a bullish or bearish candle (or several candles) where the next candle (or a sequence of candles) impulsively engulfs the order block.
Imbalance (FVG) is a price inefficiency caused by an impulsive price move due to an abnormal dominance of supply or demand at a price level.
Indicator Settings (in Simple Terms)
Show OB — enable/disable displaying the detected order blocks on the chart.
Show FVG — enable/disable displaying the detected FVG zones.
Max OB (per side) — how many long and how many short order blocks to display at the same time.
Max FVG (per side) — how many long and how many short FVG zones to display at the same time.
Engulfing Window (candles) — how many subsequent candles are allowed to consider the order block “engulfed.”
Color Engulfing Candles — highlight candles where the engulfing occurred to make it easier to spot on history.
OB Invalidation Mode — when to consider an order block “broken” (invalid):
“50%” — the OB is considered invalid if price closes with the candle body below/above the midpoint (50%) of the order block.
“Entry Drill” — the OB becomes invalid on the first touch of the OB zone.
Size Limits via ATR
OB Size in ATR — here ATR is defined as the average candle size over the last 500 bars. It is used to determine the maximum allowed size of an order block.
FVG Size in ATR — the same, but for an FVG zone: a limit on what FVG size is considered acceptable.
Setup Search Mode
Enable Setup Search Mode — when enabled, the indicator will not display all OB and FVG, but only those that contain:
pivots, or
a Sunday Open level, or
both.
Require Pivots / Require Sunday Open — a requirement that the OB/FVG zone must contain pivots and/or Sunday Open levels (depending on the selected option).
Number of Sunday Open Levels — how many Sunday Open levels to draw on the chart.
How to use
Enable Setup Search Mode .
Turn on the requirements Require Pivots and Require Sunday Open so that only the most relevant OB/FVG zones are displayed.
Wait for price to return into the highlighted Order Block or FVG area.
On a lower timeframe, look for an entry model/confirmation, such as:
engulfing,
pin bar,
break of structure / Market Structure Shift (MSS).
Repainting
The indicator does not repaint.
Русский
Индикатор помогает находить сетапы по торговой стратегии Павла Казанцева.
Что такое OB и FVG
Ордерблоки (OB) — это бычья или медвежья свеча (или несколько свеч), при этом следующая свеча (или связка свеч) импульсно поглощает ордерблок.
Имбаланс (FVG) — это ценовая неэффективность, вызванная импульсным движением цены вследствие аномального превосходства спроса/предложения на ценовом уровне.
Настройки индикатора (простыми словами)
Показывать OB — включить/выключить отображение найденных ордерблоков на графике.
Показывать FVG — включить/выключить отображение найденных зон FVG.
Максимум OB (на сторону) — сколько лонговых и сколько шортовых ордерблоков показывать одновременно.
Максимум FVG (на сторону) — сколько лонговых и сколько шортовых зон FVG показывать одновременно.
Окно поглощения (свечей) — сколько следующих свечей допускается, чтобы считать, что ордерблок был “поглощён”.
Окрашивать поглощённые свечи — подсвечивать свечи, где произошло поглощение, чтобы проще было искать это на истории.
Режим инвалидации OB — когда считать ордерблок “сломавшимся” (недействительным):
“50%” — OB считается недействительным, если цена закрепилась телом свечи ниже/выше середины (50%) ордерблока.
“Entry Drill” — OB становится недействительным при первом касании зоны OB.
Ограничение размеров через ATR
Размер OB в ATR — ATR здесь понимается как средний размер свечей за последние 500 баров. От него считается, какой максимальный размер ордерблока допустим.
Размер FVG в ATR — то же самое, но для зоны FVG: ограничение, какой размер FVG считается допустимым.
Режим поиска сетапов
Включить режим поиска сетапов — если включить, индикатор будет показывать не все OB и FVG, а только те, внутри которых есть:
пивоты, или
уровень Sunday Open, или
и то, и другое.
Обязательно Пивоты / Обязательно Sunday Open — требование, чтобы в зоне OB/FVG обязательно были пивоты и/или уровни Sunday Open (в зависимости от выбранной опции).
Количество уровней Sunday Open — сколько уровней Sunday Open рисовать на графике.
Как пользоваться
Включите режим поиска сетапов .
Активируйте требования Обязательно Пивоты и Обязательно Sunday Open , чтобы отображались только наиболее релевантные зоны OB/FVG.
Дождитесь, когда цена вернётся в отмеченный диапазон ордерблока или FVG .
На младшем таймфрейме найдите модель входа/подтверждение, например:
поглощение,
пинбар,
слом структуры / Market Structure Shift (MSS).
Перерисовка
Индикатор ничего не перерисовывает.
Analizy Trendu
ADX DMI SqueezeOverview
This indicator combines:
ADX / DMI → Measures trend strength and direction
ADX Squeeze Histogram → Shows when the trend is accelerating or “squeezing” for a breakout
Triangles → Highlight potential expansion points
Optional DI+ / DI− lines → Show bullish/bearish dominance
ADX Threshold Lines (15 / 20) → Help filter weak trends
Early ADX Acceleration Dots → Provide an early heads-up before a squeeze fires
It can be used standalone or alongside other trend tools like VWAP for better entry timing.
Entry Guidelines
Long Trades (Buy):
Histogram above 0
Green triangle appears
ADX rising or above threshold (15/20 recommended)
Optional: DI+ > DI− confirms bullish strength
Short Trades (Sell):
Histogram above 0
Red triangle appears
ADX rising or above threshold (15/20 recommended)
Optional: DI− > DI+ confirms bearish strength
Avoid trades if:
Histogram negative
Triangles appear but ADX below threshold or trend not confirmed by DI linesOptional Filters
Require ADX acceleration: Only shows signals when ADX is increasing → avoids late or false entries
VWAP Bias: Session-anchored institutional positioning (best for open & intraday scalps).
MA Bias: Time-based trend direction (best for continuation & trend days).
Tips
Best on 30-min or higher timeframes for swing/short-term trend trades
Can be combined with VWAP Moving averages , support/resistance, or Bollinger Bands
Use DI lines toggle if you want extra visual trend confirmation
Adjust DMI length (sensitivity) and ADX smoothing for your preferred timeframe
Interpretation
Histogram turning green above 0 + triangle → strong bullish move forming
Histogram turning red above 0 + triangle → strong bearish move forming
ADX above 20 → strong trend, more reliable
ADX below 15 → weak trend, signals less reliable
In short:
Long = Green bars above 0 + Green triangle
Short = Red bars above 0 + Red triangle
Confirm with ADX above threshold and optionally DI lines
yesterday
5-SMA Smart PivotDescription
This indicator is designed to identify short-term trend reversals by detecting pivot points in the 5-period Simple Moving Average (SMA).
How It Works
The script monitors the 5-day SMA for specific turning points:
Turn Down (Purple Arrow): Triggers when the SMA shifts from rising/flat to falling.
Turn Up (White Arrow): Triggers when the SMA shifts from falling/flat to rising.
Key Features
Smart Filter (Price Confirmation): Includes an optional "Weak Signal Filter" enabled by default. This ensures an arrow is only plotted if the price actually closes on the correct side of the SMA (e.g., Price must close below the SMA for a Down arrow). This helps reduce noise in choppy markets.
Clean Settings Menu: Unlike standard scripts that clutter your "Style" tab with dozens of checkboxes, this script uses dynamic labeling. This keeps your settings menu clean while still giving you full control.
Fully Customizable:
Arrow Size: Select from "Tiny" to "Huge" via a simple dropdown menu.
Colors: Fully adjustable colors for the SMA line, Up arrows, and Down arrows.
Settings
SMA Length: Default is 5, but can be adjusted to any length.
Filter Weak Signals: Toggle on/off to require price confirmation.
Visual Style: Change line width, colors, and arrow sizes instantly from the Inputs tab.
Usage
This tool is best used for short-term momentum trading to catch immediate shifts in trend direction. It works well when combined with a longer-term trend filter (like the 20/50 SMA) to take signals only in the direction of the major trend.
MTF - OHLC - AMDPO3 Extension – Key Features
SMT
-Shows correlations between multiple instruments (e.g., Pair 2, Pair 3).
-Auto-matching of pairs to highlight synchronized movements.
-Does not include SMT with DXY.
HTF Projection (High Time Frame)
-Projects higher timeframe levels directly onto the current chart.
-Supports multiple HTFs (e.g., 1H, 4H, Daily, Weekly) with customizable number of candles.
-Shows mid lines and key candle levels for HTFs.
-Full visual customization: candle body, border, and spike colors for bull and bear.
-Options for labels above/below candles and PSP display.
-Manage offsets for candle distance and visual sizing.
Multi-Timeframe and Separators
-Displays levels and period separators across multiple timeframes: for example, on 1m chart,
you can see 15m and 4H references.
-Ideal for strategies combining MTF, HTF, and LTF.
Manipulation Detection (AMD)
-Identifies accumulation, manipulation, and distribution zones.
-Activates manipulation signal when a candle wipes out the previous High or Low and closes
back within the range.
-Highlights CISD zones related to manipulation or HTF SMT.
Advanced Level Analysis
-Tracks daily levels with minimum distance between them.
Visual for HTF - MTF - LTF
Mode 1
tf → TF1 → TF2 → TF3 → TF4
"1m → 15m → 30m → 1h → 4h"
"3m → 30m → 4h → D → W"
"5m → 1h → D → M → 3M"
"15m → 4h → W → M → 3M"
"30m → 4h → W → M → 3M"
"1h → D → M → 3M"
"4h → W → M"
"D → M"
"W → M"
Mode 2
tf → TF1 → TF2 → TF3 → TF4
"1m → 15m → 30m → 1h → 4h"
"3m → 30m → 1h → 4h → D"
"5m → 1h → 4h → D → W"
"15m → 1h → 4h → D → W"
"30m → 1h → 4h → D → W"
"1h → 4h → D → W → M"
"4h → D → W → M"
"D → W → M"
"W → M"
Model SMT: Same TF but Correlated Pairs
Model Manual: use the manually set TF (HTF 1 - HTF 2 - HTF 3 - HTF 4)"
With this indicator, you'll have a clearer view of what it can do to the price.
For example, if we're bullish and see manipulation on the highs in HTF and CISD confirmation in LTF, we can predict that the price will fall to the TP level.
Disclaimer
This script is provided for educational and informational purposes only. It does not constitute financial advice, investment advice, or a recommendation to buy or sell any financial instrument. The author takes no responsibility for any losses or damages resulting from the use of this script. Trading involves risk, and you are solely responsible for your trading decisions.
RSL Buy Signal Alert the relative Strength Index from Levy is checked. If it is above a dynamic value, an alert is triggered
THAI TRENDINGVolume is the total amount of assets traded in a specific period of time. The 24-hour Volume indicator is used to measure the total volume of a symbol traded in the last 24 hours, expressed as in currency. It can be used to measure the market's interest in a particular symbol.
ChunkbrAI-NN INDIChunkbrAI-NN INDI: The Neural Network Odyssey
A Native Pine Script Neural Network Research Engine
Welcome to ChunkbrAI-NN 5.3. This is not a standard technical indicator; it is a proof-of-concept Artificial Intelligence engine built entirely from scratch within Pine Script.
Neural Networks typically require iterating over massive datasets, a task that usually times out on TradingView. ChunkbrAI solves this by introducing a novel "Chunking Architecture"—a system that breaks history into digestible learning blocks and trains a Multilayer Perceptron (MLP) using a "Chunking" approach.
It features a living ecosystem where neurons have "genes," grow mature, and adapt to market regimes using a highly sophisticated Context-Aware normalization engine.
-----------------------------------------------------------
The Core Concept: "The Time Wheel"
To bypass Pine Script's execution limits, this script does not train linearly from the beginning of time. Instead, it operates like a spinning wheel of experience.
* The Chunk System: On every bar update, the engine reaches back into history (up to 5000 bars) and grabs random or sequential "Chunks" of data. It treats these chunks as isolated training samples.
* Experience Replay: By constantly revisiting past market scenarios (Chunks), the network slowly converges its weights, learning to recognize patterns across different eras of price action.
-----------------------------------------------------------
Architecture & Modules
A. The Neural Core (MLP)
At the heart is a raw neural network built with arrays:
* Topology: A dense network with a customizable Hidden Layer (Default: 60 Neurons).
* Timewarp (Stride): When enabled, the network uses "dilated" inputs (skipping bars, e.g., 1, 3, 5...). This increases the network's Field of View without increasing computational load.
* Forecasting: The network outputs a standardized prediction which is then de-normalized to project the future price path on your chart.
B. The Context System (The "Eyes")
Raw prices confuse neural networks. A $1000 move in Bitcoin is massive in 2016 but noise in 2024. ChunkbrAI uses a relativistic Context System:
* Regime Detection: It uses a Zero-Lag Moving Average (ZLMA) and Non-Linear Regression to measure the current market "Vibe" (Volatility & Trend).
* Dynamic Normalization: The inputs are scaled based on this context. If the market is volatile, the data is compressed; if calm, it is expanded. This ensures the brain receives consistent signal patterns regardless of the absolute price.
C. The Gene System (Neuro-Plasticity)
This is the experimental "biology" layer. Neurons are not just static math; they have life cycles.
* Maturity: Neurons start "Young" (highly plastic, high mutation rate). As they successfully reduce error, they become "Wise" (stable, low mutation).
* Mutation: If a "Wise" neuron begins failing (high error), it is demoted and forced to mutate. This allows the brain to "forget" obsolete behaviors and adapt to new market paradigms automatically.
* Profiles: You can initialize the brain with different personalities (e.g., Dreamer, Young Chaos, Zen Monk).
D. The Brain Scheduler (Adaptive Learning)
A static Learning Rate (LR) is inefficient. The Brain Scheduler acts as the heartbeat:
* Panic vs. Flow: It monitors the derivative of the error. If the error spikes (Panic), the Scheduler slows down learning to prevent the model from exploding. If the error smooths out (Flow), it accelerates learning (Infinite LR Mode).
-----------------------------------------------------------
Forecasting Modes
The script provides two distinct ways to visualize the future:
1. Direct Projection (Green Line):
The network takes the current window of price action and predicts the immediate next step. If Timewarp is active, it interpolates the result to draw a smooth curve.
2. Autoregression (Cyan Line):
Available in "Auto" mode. The network feeds its *own* predictions back into itself as inputs to generate multi-step forecasts.
* Wave Segmentation: The script intelligently guesses the current market cycle length and attempts to project that specific duration forward.
-----------------------------------------------------------
Operation Manual
The script has two distinct training loops: first, when you add it to a chart, Pine runs through the available historical bars once, and this initial history pass is the main training phase where the network iterates chunk-by-chunk using your configured chunk count/iterations (e.g., if chunk count is 3, it performs 3 chunk updates per step), but pushing chunk count, iterations, or model sizing too high can hit Pine’s execution limits; after that, once real-time candles start printing, the script can either keep training (weights continue updating) or freeze the weights and run inference only, producing predictions from the learned parameters, and if live training is enabled it can also simulate “bars-back” style training during live mode by iterating across prior bars as if doing another history pass—which again can run into limits if chunks/iterations/sizing are too heavy—so when changing parameters to evaluate behavior you change them carefully and individually, because multiple simultaneous increases make it hard to attribute effects and can more easily trigger those execution constraints.
Weight Persistence (Save/Load):
Pine Script can’t write files or persist weights directly, so ChunkbrAI uses a library-based workaround that’s honestly tricky and kind of a pain: you enable the weight-export alerts so the script emits the weights (W1/W2/biases etc.) as text, and those payloads are chunked as well; then, outside TradingView, I use a separate Python script to parse the alert emails, reconstruct and format the chunked weights properly, and generate the corresponding library code files; after that, the libraries have to be published/updated, and only then can the main script “restore” by reading the published lib constants on chart load, effectively starting with the pre-trained weights instead of relying purely on the fresh history-run training pass. I don’t recommend this process unless you really have to—it’s fragile and high-effort—but until TradingView implements some simple built-in data storage for scripts, it’s basically the only practical way to save and reload your models.
-----------------------------------------------------------
Limitations & Notes
* Calculation Limits: This script pushes Pine Script to its absolute edge. If you increase Chunk Size or Hidden Size too much, you WILL hit execution limits. Use the defaults as a baseline.
* Non-Deterministic: Because the "Wheel" picks random chunks for training, two instances of this script might evolve slightly different brains unless you use the Restore Weights feature.
* Experimental: This is a research tool designed to explore Neural Networks and Genetic Algorithms on the chart. Treat it as an educational engine, not financial advice.
Credits: Concept and Engineering by funkybrown.
QuCap Pure Liquidity: Untouched Liquidity PoolsOverview Most liquidity indicators on the Public Library suffer from "Chart Noise." They often leave levels on the chart long after they have been "wicked out," simply because the candle didn't manage to close past the level.
QuCap Pure Liquidity is designed for the precision trader who only cares about Intact Liquidity. This script identifies pivot-based liquidity pools and monitors them in real-time. If price wicks through a level by even a single tick, the level is immediately invalidated and removed from your chart.
Key Features
Instant Invalidation: Levels are deleted on wick touch (High/Low), not candle close.
Intact Levels Only: What you see on the chart is "Fresh" and has not been mitigated.
Memory Management: Includes customizable limits for Buy-Side and Sell-Side levels to keep your chart clean and your browser running fast.
Fully Customizable: Adjust pivot strength (Left/Right bars) and visual styles to match your personal template.
How to Use
Draw on Liquidity: Use the remaining lines as a magnet for price action.
Stop Runs: Observe how price reacts when it clears these levels.
Clean Charts: Perfect for traders who follow SMC or ICT concepts and need to see where the real "resting" orders are.
Settings
Pivot Strength: Increase these values (e.g., 5, 5) to find more significant historical levels, or keep them low (2, 2) for scalp targets.
Max Levels: Keeps the chart from showing lines from weeks ago that are no longer relevant to current intraday price action.
MTF EMA Traffic Light System Trend Alignment for ScalpersMTF EMA Traffic Light – Trend Bias System
This indicator is designed to help traders quickly identify high-probability trend alignment using multiple timeframes and EMAs.
It analyzes price relative to the 13 EMA and 55 EMA on:
1 Minute
5 Minute
15 Minute
1 Hour
4 Hour
Then it converts that data into a simple Traffic Light system to guide trade decisions.
🚦 How It Works
Each timeframe is classified as:
🟢 BULL – Price above both EMAs
🔴 BEAR – Price below both EMAs
🟡 MIXED – No clear direction
The system focuses on lower-timeframe alignment:
When 1m + 5m + 15m are aligned → Strong setup
When mixed → Caution
When misaligned → Stand aside
🟢 GREEN State (Full Trade Mode)
Triggered when:
✔ 1m, 5m, and 15m are all BULL → Long Bias
✔ 1m, 5m, and 15m are all BEAR → Short Bias
Rules:
Full position size
Trade with trend
Look for EMA pullbacks
Let winners run
🟡 YELLOW State (Caution Mode)
Triggered when:
✔ Lower timeframes are mixed
Rules:
Reduce size
Take quick profits
No holding
Defensive trading
🔴 RED State (No Trade)
Triggered when:
✔ No clear alignment
Rules:
Stay out
Mark key levels
Protect capital
📋 Dashboard Panel
The indicator displays a real-time table showing:
Each timeframe’s bias
Overall market state
Trade rules
This allows you to read market structure in seconds without switching charts.
🎯 Best Use
This tool works best for:
✔ Scalping
✔ Intraday trading
✔ Trend continuation setups
✔ EMA pullback strategies
Recommended for:
Forex
Indices
Gold
Crypto
⚠️ Risk Disclaimer
This indicator is a decision-support tool, not a guarantee of profits.
Always use:
Proper risk management
Stop losses
Personal trade rules
Never risk more than you can afford to lose.
Pivot Points Detector - ATR basedThis pivot points detector is a precision-tuned momentum and structural pivot detector designed specifically for high-frequency scalpers (like those trading ES or NQ on the 15-second timeframe).
By combining dynamic volatility filters with structural displacement requirements, it isolates high-conviction reversal points while filtering out the "noise" of lower-timeframe chop.
How It Works
This indicator utilizes a three-gate logic system to ensure that only the most significant market turns are highlighted:
Gate 1: The ATR Momentum Break
The system monitors an ATR (12 / 2.0) trailing stop. A potential pivot is only identified when the price successfully closes across this volatility line, proving that immediate momentum has shifted.
Gate 2: Absolute Structural Anchor
Once a trend change is triggered, the indicator performs a 60-bar retrospective scan (approximately 15 minutes of data) to identify the absolute Highest High or Lowest Low that initiated the move. This pins the marker to the "Source" of the trend rather than the signal bar itself.
Gate 3: The Persistence Proof (Faded vs. Solid)
To prevent "fake outs," the indicator uses a unique faded logic:
Faded Triangle: Appears instantly at the pivot source as a "potential" setup.
12-Tick Run: The triangle only turns Solid if the price travels 12 ticks from that absolute pivot without crossing back over the ATR trail.
Auto-Deletion: If the momentum fails and the ATR trail is breached before the 12-tick target is hit, the faded triangle is automatically wiped from the chart.
Key Features
Clean Visuals: Triangles are printed with a 2-tick offset from the candle wicks for maximum readability.
Label Memory Management: The script maintains a history of the last 200 triangles, ensuring performance stability during long trading sessions.
Fully Customizable: Users can adjust the ATR multiplier, the structural lookback window, the tick-confirmation target, and all visual colors directly from the settings menu.
Trend-Change Focus: Unlike standard Zig-Zags that repainting or mark every wiggle, this tool only prints a marker when a formal ATR trend flip occurs.
Best Use Case: This tool is built for the scalper who needs a reliable "Hard Level" for stop-loss management and re-entry identification. When a triangle turns Solid, it represents a verified structural floor or ceiling that has shown displacement strength.
UTC-5 Time MarkersFor model 110 of DTT use flout with this as a bias and you will catch high wr high rr trades for this certain time window of continuation or reversal
Cruzamento MACD 15 min sauloCruzamento macd nos 15 min, quando acontece o cruzamento o indicador da o sinal de compra e venda.
ATR Deviation Sigmoid Oscillator# ATR Sigmoid Volatility Regime Oscillator
## What This Indicator Does
The **ATR Sigmoid Volatility Regime Oscillator** is a volatility-regime detection tool designed to answer a single, critical question:
> *Is the market currently in a low-volatility or high-volatility regime—relative to its own recent behavior?*
Instead of using raw volatility values, this indicator **contextualizes volatility** by comparing the current ATR (Average True Range) to its own historical baseline and then mapping that deviation into a bounded, interpretable scale.
---
## How It Works (Conceptual)
1. **ATR Calculation**
The indicator starts with the standard ATR, which measures market volatility without direction.
2. **Baseline via EMA**
An EMA of ATR is used as a dynamic volatility baseline. This adapts to changing market conditions instead of relying on static thresholds.
3. **Relative Deviation**
The difference between ATR and its EMA represents how "unusual" current volatility is relative to its recent history.
4. **Normalization**
This deviation is normalized using ATR’s own dispersion, ensuring comparability across assets and timeframes.
5. **Sigmoid Transformation (0–100)**
A sigmoid function maps the normalized value into a **bounded 0–100 oscillator**, producing:
* Stability at extremes
* Smooth regime transitions
* No unbounded spikes
---
## How to Read the Oscillator
* **Above 50 (Green)**
High-volatility regime. Momentum strategies, breakout logic, and wider risk parameters tend to perform better.
* **Below 50 (Red)**
Low-volatility regime. Mean-reversion, range trading, and tighter risk controls are generally more appropriate.
* **The 50 Level**
Acts as a *volatility regime boundary*, not a buy/sell signal.
This indicator is **not directional**. It is a *context filter*.
---
## What This Indicator Is Best Used For
* Enabling/disabling strategies based on volatility regime
* Filtering false signals in low-volatility environments
* Position sizing and stop-distance adaptation
* Multi-asset volatility comparison using a common scale
---
## What This Indicator Is NOT
* ❌ Not a buy or sell signal
* ❌ Not a trend indicator
* ❌ Not predictive on its own
It is designed to be used **in combination with price, trend, or momentum logic**.
---
## Disclaimer
This indicator is provided for **educational and informational purposes only**.
It does not constitute financial advice, investment recommendations, or an offer to buy or sell any financial instrument. Trading involves risk, and past performance does not guarantee future results.
You are solely responsible for any trading decisions you make using this tool.
---
## Like This Indicator?
If you find this volatility regime tool useful:
* ⭐ **Add it to your favorites**
* 💬 **Leave a comment or feedback** — suggestions are welcome
* 👤 **Follow for future updates and new quantitative tools**
Your support helps improve and refine this work.
---
*Designed with a quantitative, regime-based approach to market analysis.*
MA ATR RangeExponencial Moving average with 3 ATR ranges. It shows trend and overbought and oversold levels.
SMA Dow-Flow MTF (SAXO Logical Alert)This script is an advanced MTF (multi-timeframe) monitor that combines the concepts of Dow Theory and SMA (Single Moving Average) to capture the moment when trends align across multiple timeframes. It is particularly focused on visualizing when lower timeframes synchronize with the direction of higher timeframes, without being distracted by short-term noise. 1. Trend Determination Mechanism (Core Logic): Rather than the usual simple determination of whether a price is above or below a moving average, this is based on updates of "low lows and highs." Pivot Detection: Points where the SMA moves in a "V" or "inverted V" shape are recorded as reversal candidates ($lastH$, $lastL$). Trend Reversal Conditions: Uptrend: When the price clearly breaks above the most recent SMA high ($lastH$). Downtrend: When the price clearly breaks below the most recent SMA low ($lastL$). 2. Indicator Features ① Sync Hierarchy: This script counts the degree to which the direction of each time period matches that of the higher time period, starting from the lower time period. The 5-minute time period forms a trend. The 15-minute time period follows the same direction as the 5-minute time period. The 1-hour time period follows the same direction as the 15-minute time period... (continues up to the daily time period). This ensures that an alert is sent out when the larger trend (daily or 4-hourly) swallows up the smaller trend (5-minute or 15-minute). ② Set Selection: You can switch between the "Yen Set (AUDJPY, EURJPY, etc.)" and the "Dollar Set (EURUSD, GBPUSD, etc.)." This allows you to grasp the strength or weakness of a specific currency (e.g., a weak yen or a strong dollar) at a glance.
This script's alert function does not simply sound when the trends match, but is designed to pinpoint the moment when the number of trend synchronizations increases (i.e., when momentum increases).
Below, we will explain in detail how it works and the meaning of the notifications.
1. Alert Conditions
An alert will only be triggered when all three of the following conditions are met.
Increase in Sync Count: For example, if only two time frames, the 5-minute and 15-minute ones, were aligned (Sync: 2), and the 1-hour one also aligns in the same direction (Sync: 3), the alert will be triggered.
Above the set minimum count (alert_min): The default setting is "3." In this case, a notification will be triggered the moment three, four, or five time frames are synchronized.
Selected Set Only: If the "Yen Set" is displayed, an alert will not be triggered even if a currency pair in the Dollar Set is synchronized.
2. How to Read the Alert Message
When you receive a notification, the following message will be displayed.
USDJPY: 4-Bar Synchronization (Upward)
USDJPY: A Currency Pair Gaining Momentum
4-Bar Synchronization: Indicates that the direction of the four timeframes (5-minute, 15-minute, 1-hour, and 4-hour) is consistent, starting with the lowest timeframe.
Upward/Downward: The direction of the synchronization.
このスクリプトは、「ダウ理論」と「移動平均線（SMA）」の考え方を組み合わせ、複数の時間足でトレンドが揃った瞬間を捉えるための高度なMTF（マルチタイムフレーム）モニターです。特に、短期的なノイズに惑わされず、上位足の方向に下位足が同期したタイミングを視覚化することに特化しています。1. トレンド判断の仕組み（コアロジック）通常の「移動平均線より上か下か」という単純な判定ではなく、「押し安値・戻り高値」の更新をベースにしています。ピボットの検知: SMAが「V字」または「逆V字」に動いた地点を、反転の候補（$lastH$, $lastL$）として記録します。トレンド転換の条件:上昇トレンド: 価格が直近のSMA高値（$lastH$）を明確に上抜けたとき。下落トレンド: 価格が直近のSMA安値（$lastL$）を明確に下抜けたとき。2. インジケーターの特徴① 同期（Sync）の階層構造このスクリプトは、下位足から順に「どれだけ上位足と方向が一致しているか」をカウントします。5分足がトレンドを形成。15分足が5分足と同じ方向。1時間足が15分足と同じ方向……（日足まで続く）これにより、「大きな流れ（日足・4時間足）に、小さな流れ（5分・15分）が飲み込まれた瞬間」を逃さずアラート通知します。② セット選択機能「円セット（AUDJPY, EURJPYなど）」と「ドルセット（EURUSD, GBPUSDなど）」を切り替えて表示できます。これにより、特定の通貨の強弱（円安・ドル高など）を一目で把握できるのが強みです。
このスクリプトのアラート機能は、単に「トレンドが一致した」ときに鳴るのではなく、**「トレンドの同期数が増加した瞬間（＝勢いが増した瞬間）」**をピンポイントで通知するように設計されています。
以下に、その仕組みと通知内容の意味を詳しく解説します。
1. アラートが発生する条件
アラートは、以下の3つの条件がすべて揃った時にのみ発信されます。
同期数（Sync Count）の増加: 例えば、それまで「5分足と15分足」の2つしか揃っていなかった（Sync: 2）のが、新しく「1時間足」も同じ方向に揃った（Sync: 3）という変化の瞬間に鳴ります。
設定した最小数以上 (alert_min): 初期設定では「3」になっています。この場合、3つ、4つ、または5つの時間足が同期した瞬間に通知が飛びます。
選択中のセットのみ: 「円セット」を表示している時は、ドルセットの通貨ペアが同期してもアラートは鳴りません。
2. アラートメッセージの読み方
通知が来ると、以下のようなメッセージが表示されます。
USDJPY: 4足同期 (上昇)
USDJPY: 勢いが出た通貨ペア
4足同期: 下位足から順に「5分・15分・1時間・4時間」の4つの時間足で方向が一致したことを示します。
上昇 / 下落: その同期している方向です。
MACD Buy E Sell EditavelMacd personalizavel com sell para cruzamento de venda e buy para cruzamento de compra
A+ Pullback & Continuation 3 ema pullback und continuation
signale buy sell nach pullback
ema müssen übereinander sein
buy sell signals after pullback
ema have to be clear
Vietnam Asset Monitoring ToolVietNamese Asset Correlation Tracking Chart
This chart monitors the relationship between major asset classes which Vietnamese analyst should monitor:
Gold Price: Gold is currently in the spotlight as international trade tensions show no signs of easing.
U.S. Dollar Index (DXY): The strength of the U.S. dollar, a key indicator that has relative correlations with most asset classes.
VN30: Vietnam’s benchmark stock index, representing the top 30 leading listed companies.
VNREAL: The stock index tracking Vietnam’s real estate–related companies.
Hanoi Residential Property Prices: Apartment and landed house prices in Hanoi, compiled and aggregated by **VietRealty.Pro**
Development in progress..
Iceberg strategy screenerIceberg Strategy — H4 Trend & Volume Filter
Iceberg Strategy is an H4 trend indicator that combines MACD structure, liquidity filtering, correlation analysis, and retest logic to identify structured market conditions.
The indicator is designed for swing trading and focuses on filtering weak markets while highlighting confirmed trend environments.
Core Components
H4 Trend Logic
Dual MACD structure is used to determine the main trend and confirmation phase before entry.
24H Volume Filter
Calculates USD trading volume over the last 24 hours.
Signals are allowed only in sufficiently liquid markets.
Correlation Filter
Optional correlation control against BTC (or a custom symbol) to avoid highly dependent market movements.
Volume Dominance (Buyer vs Seller)
Measures buying vs selling pressure to confirm directional strength.
Retest Logic
Optional retest confirmation after a level break to improve entry structure.
Risk Structure
The indicator automatically calculates:
ATR-based Stop Loss
Take Profit levels from 1R to 5R
All levels are visualized directly on the chart.
Visual Features
BUY / SELL labels
entry dots
SL / TP lines
H4 trend coloring
optional volume zones
parameter status table
Alerts
Built-in alerts:
Long Entry
Short Entry
Compatible with webhook automation.
Purpose
This indicator is intended for:
H4 swing trading
trend analysis
structured market filtering
disciplined trade planning
It is not a standalone trading system and requires independent risk management.
Disclaimer
This script is for educational and analytical purposes only.
It is not financial advice.
⚙️ Description of indicator settings
Risk Management
SL Offset
Additional safety buffer added to Stop Loss to reduce fake stop-outs.
Filters
Enable Correlation Filter
Activates correlation control against a reference symbol.
Enable 24H Volume Filter
Allows signals only when sufficient liquidity is present.
Correlation Settings
reference symbol (default: BTC)
lookback length
maximum allowed correlation
excluded symbols list
Volume Fight Settings
Lookback
Period used to measure buyer vs seller dominance.
Flat Threshold
Defines accumulation/distribution sensitivity.
Background Zones
Optional visual highlighting.
Retest Settings
Key Level Price
Important level used for retest logic.
Retest Range (%)
Allowed deviation range from the level.
SL/TP Settings
ATR Length
ATR calculation period.
ATR Multiplier
Stop Loss distance factor.
📘 Usage guide
Recommended workflow
Work on H4 chart
Wait for confirmed signal
Check higher timeframe structure
Enter with defined risk
Follow SL/TP structure
Entry refinement
After H4 signal:
use M15–H1 for precise entry
wait for pullback if needed
avoid chasing extended candles
Trade management
partial exit at TP1–TP3
move SL to breakeven after TP1 (optional)
trail remaining position
Avoid
trading against signals
removing stop loss
emotional position sizing
revenge trading
Alg0 Hal0 RSI 4555
The Alg0 ۞ Hal0 RSI 4555 is a trend-following momentum indicator designed to capture high-probability entries during market pullbacks. It combines a customizable Trend Filter (Moving Average) with a specialized "Armed & Triggered" RSI logic to avoid choppy markets and fakeouts.
1. How the Logic Works
This indicator uses a two-step process to generate signals, ensuring you only enter when momentum is confirmed.
The Trend Filter: The background color tells you the primary trend. If the price is above the Moving Average, the background is Green (Bullish). If below, it is Red (Bearish).
The "Arming" Phase: To prevent chasing "overbought" prices, the script must first see a pullback.
Longs: RSI must drop below 40 while the trend is Bullish.
Shorts: RSI must rise above 60 while the trend is Bearish.
The Trigger: Once "Armed," the script waits for a momentum shift.
LONG Signal: RSI crosses above 55.
SHORT Signal: RSI crosses below 45.
2. Key Visual Features
Dynamic Background: Instantly identifies the macro trend based on your chosen MA (SMA, EMA, HMA, WMA, or ALMA).
Momentum Labels: "LONG" and "SHORT" labels appear directly on the chart when all conditions are met.
Divergence Detection: Automatically plots Bullish and Bearish divergences to warn you of potential trend exhaustion.
Customizable Levels: The four key RSI levels (60, 55, 45, 40) are fully adjustable to fit different assets or timeframes.
3. Settings Guide
RSI Settings: Adjust the RSI length (default is 14) and toggle Divergence labels on/off.
Background Logic: Choose your preferred Moving Average style. ALMA is recommended for the smoothest trend filtering, while SMA/EMA are better for classic trend following.
Custom Levels: Fine-tune the 45/55 trigger points. For more aggressive entries, move these closer to the 50-midline. For more conservative entries, spread them further apart.
4. Best Practices
The "Neutral Zone": The area between 45 and 55 is the "No Man's Land." Wait for a clean candle close and a label before entering a trade.
Risk Management: Use the Recent Swing High/Low or the Trend MA as a logical stop-loss level.
Squeeze Momentum + ADX MemoThis indicator is a comprehensive technical analysis tool that combines the volatility detection of the Squeeze Momentum with the trend strength of the ADX (Average Directional Index). It is optimized to provide a clear reading of price action across multiple timeframes.
Unlike standard oscillators, this customized version by Memo integrates a dynamic Multi-Timeframe (MTF) info panel and a visual scaling system, allowing you to monitor strength and momentum in a single pane without cluttering your price chart.
🛠 KEY FEATURES
Squeeze Momentum: Identifies compression phases (red dots) and volatility breakouts (green dots).
Dynamic ADX: ADX and DI+/DI- lines are proportionally scaled to the histogram for intuitive visualization.
Multi-Timeframe Analysis (MTF): A dedicated dashboard shows trend strength and direction (EMA 200) for both the current chart and a higher timeframe (e.g., 1D).
Divergence Detector: Automatically identifies Bullish and Bearish divergences (BULL/BEAR DIV).
Signal Labels: LONG and SHORT markers triggered when trend strength is confirmed.
📘 DETAILED USER GUIDE
1. Understanding the Elements
Histogram: Cyan/Blue (Bullish), Red/Maroon (Bearish).
Center Dots: Red dots indicate the market is "squeezing" (price compression/accumulation). Green dots indicate the squeeze has released and a trend is underway.
White Line (ADX): Above the Critical Level (23) indicates a strong trend. Below 23 suggests a range-bound or "choppy" market.
2. Trading Strategy (High Probability Setup)
LONG Entry (Buy):
Squeeze: Red dots must be present (accumulation phase).
Shift: Histogram starts moving up or changes to recovery colors.
Strength: The ADX (white line) crosses above the critical level (23).
Confirmation: DI+ (green) must be above DI- (red).
Macro Filter: The dashboard must show a BULLISH trend on the Higher Timeframe.
SHORT Entry (Sell):
Squeeze: Red dots must be present.
Shift: Histogram starts dropping with increasing momentum.
Strength: The ADX crosses above the critical level (strength is gaining on the downside).
Confirmation: DI- (red) must be above DI+ (green).
Macro Filter: The dashboard must show a BEARISH trend on the Higher Timeframe.
3. Divergences & Exits
Use the BULL DIV and BEAR DIV labels as warning signals. A divergence against your current position is a clear sign to take profits or tighten your Stop Loss.
4. Info Panel (Dashboard)
ADX Metric: If both timeframes (Current and Higher) are green, the probability of a successful trend trade increases significantly.
Trend: Based on the 200 EMA. Memo's Golden Rule: Avoid trading against the higher timeframe trend to stay away from "fakeouts."
