Rozpocznij

Strategy

ICT Entry V1 [TS_Indie]📌 Description – ICT Entry V1 This trading system is based on price action, combined with FVG, iFVG, and liquidity, and it uses the mechanism from the indicator “Smallest Swing ” to validate swings that become liquidity. ⚙️ Core Logic & Working Mechanism I won’t explain FVG in detail, as most traders are already familiar with it. Let’s focus on the mechanism of iFVG instead. The concept of iFVG is based on a supply-to-demand flip and a demand-to-supply flip within an FVG zone. For an iFVG to be confirmed, the candle close must break through the FVG. A wick alone does not count as a valid iFVG confirmation. The confirmation of market structure swings uses a pivot length mechanism combined with price action. It validates a swing by detecting a structure break formed by candles making new highs or new lows. 📈 Buy Setup 1.Liquidity sweep on the demand side, with price closing above the liquidity level. 2.A demand zone is formed as FVG and iFVG, where iFVG is located above FVG. 3.The gap between the upper box of FVG and the lower box of iFVG must be within the defined Min and Max range. 4.Market Structure must be in a Bullish trend. 5.Place a Pending Order at the upper box of FVG and set Stop Loss at the lower box of FVG (Entry and Stop Loss can be adjusted using Entry Zone and ATR-based Stop Loss). 📉 Sell Setup 1.Liquidity sweep on the supply side, with price closing below the liquidity level. 2.A supply zone is formed as FVG and iFVG, where iFVG is located below FVG. 3.The gap between the lower box of FVG and the upper box of iFVG must be within the defined Min and Max range. 4.Market Structure must be in a Bearish trend. 5.Place a Pending Order at the lower box of FVG and set Stop Loss at the upper box of FVG (Entry and Stop Loss can be adjusted using Entry Zone and ATR-based Stop Loss). ⚙️ Liquidity Sweep Conditions ➯ When a liquidity sweep occurs on the demand side, the system will start looking for Buy Setup conditions. ➯ When a liquidity sweep occurs on the supply side, the system will immediately switch to looking for Sell Setup conditions. ➯ The system will always prioritize the most recent liquidity sweep and search for setups based on that direction. ➯ The liquidity sweep condition will be invalidated when price closes back below (for demand sweep) or above (for supply sweep) the most recently swept liquidity level. ⭐ Pending Order Cancellation Conditions A Pending Order will be canceled under the following conditions: 1.A new Price Action signal appears on either the Buy or Sell side. 2.When Time Session is enabled, the Pending Order is canceled once price exits the selected session. 🕹 Order Management Rule When there is an active open position, the indicator restricts the creation of new Pending Orders to prevent overlapping positions. ⚠️ Disclaimer This indicator is designed for educational and research purposes only. It does not guarantee profits and should not be considered financial advice. Trading in financial markets involves significant risk, including the potential loss of capital. 🥂 Community Sharing If you find parameter settings that work well or produce strong statistical results, feel free to share them with the community so we can improve and develop this indicator together.
Strategia Pine Script®
od Truth_Strategy_Indie
3
Adaptive Bull Ratio Strategy█ Overview: Why This Strategy Most option strategies fall into two traps: They are too rigid: A "Call Ratio Spread" works great in slow markets but gets destroyed if the market rallies hard. They are too simple: A simple "Buy Call" suffers from time decay (Theta) if the market chops sideways. The Adaptive Bull Ratio Strategy solves both . It is a living strategy that "shifts gears" based on price action. It is called "Adaptive" because it morphs its structure three times during a trade. It starts conservative to harvest Time Decay, but if the market explodes upwards, it "uncaps" itself to ride the trend aggressively. █ The Entry Philosophy: Why Supertrend? The default setting uses the Supertrend indicator as the trigger. This is intentional: Volatility Awareness: Supertrend adapts to market noise using ATR. In high volatility, bands widen to prevent false entries. Trend Confirmation: Since Phase 1 involves selling options, entering "too early" against a falling market is dangerous. Supertrend forces patience, waiting for a confirmed reversal (Close > Trend Line), ensuring the momentum is actually in your favor before you commit capital. The "Drift" Benefit: This strategy excels in markets that "drift" upwards. Supertrend identifies these trends while filtering out short-term chop. Flexibility with External Sources: While Supertrend is the default, the strategy is designed to be flexible. You can enable the 'Enable External Source' option in the settings to plug in any custom indicator (e.g., Moving Averages, Parabolic SAR, or a proprietary trendline). The Golden Rule for External Sources: The script interprets a Bullish Signal whenever your External Source line is below the Close price (Ext Source < Close). Compatibility: As long as your custom indicator behaves like a support line in an uptrend (plotting below the candles), it will work seamlessly with this strategy's logic. █ The "Long Only" Rationale: Avoiding the Volatility Trap Why not trade this on the short side (Puts) during crashes? The Volatility Trap (Vega Risk): In Bull markets, Implied Volatility (IV) usually drops, helping your sold options decay faster. In Bear markets, IV explodes (panic). Selling OTM Puts during a crash is dangerous as their value skyrockets, neutralizing gains. Velocity Risk: Bear markets crash fast ("Elevator Down"). Prices can blow through adjustment levels faster than the strategy can safely roll down, causing slippage. Structural Skew: OTM Puts are inherently more expensive. Buying expensive ITM Puts and selling expensive OTM Puts shifts the breakeven further away, making V-shape recoveries painful. █ How It Works & Stands Out This strategy actively transforms risk profiles based on market movement: Phase 1: The "Safe" Start (Entry) Setup: Initiates a Call Ratio Spread (Buy 2 ITM, Sell 4 OTM) + Protective Puts. Logic: Profits from sideways drift or slow rallies via Time Decay (Theta). The sold options finance the trade. Phase 2: The "Shift" (Adjustment Level 1) Trigger: Market moves above Leg 2 (3 OTM Call). Action: Rolls Up the position. Exits initial legs, enters new higher legs, and adds a Short Put to finance the roll. Impact: Aggressive. You bet the trend is strong enough to support the added downside risk of the short put. Phase 3: The "Uncap" (Adjustment Level 2) Trigger: Market moves above Leg 3 (4 OTM Call). Action: Exits all Sold Calls. Impact: Uncaps profit potential. The trade becomes a Net Long position (Long Calls + Short Puts), allowing you to ride a massive rally without a ceiling. Phase 4: The "Lock-In" (Optional Trail Adjustment) Trigger: The market goes parabolic (price rises X levels above Leg 3, configurable in settings). Action (If Enabled): Call Adj: Exits the Phase 3 calls and buys fresh 1-OTM calls (Rolling Up to lock profits). Put Adj: Exits all Put legs (Removing downside risk completely). Impact: Maximum Safety. This phase is about "banking" the windfall from a massive rally and leaving a smaller, risk-free runner to capture any final extension. █ How to Start: A Quick Setup Guide Step 1: Map Expiry Dates Manually input your trading expiry dates in Settings -> Expiry Management. Format: YYYY-MM-DD (e.g., 2025-12-25). Strict adherence required for DhanHQ. Step 2: Configure Symbol & Size Exchange/Symbol: Enter NSE and NIFTY (or your ticker). Lot Multiplier: Default is 1. Set to 2 to double all quantities (e.g., Buy 2 becomes Buy 4). Step 3: Understand Visuals Entry Window (Light Blue): Strategy is scanning for new trades. Non-Entry Window (Dark Blue): Trading blocked (Day before Expiry & Expiry Day). Only management allowed. Green Box: Valid Late Entry Zone. Red Dashed Line: Invalidation Level (if price touches this, no late entry). Fuchsia Line: Trigger level for Special Trail Adjustments (Phase 4). IMPORTANT: Broker & Technology Heads-Up: The alerts generated by this script ({"secret": "...", "alertType": "multi_leg_order"...}) are specifically formatted for the DhanHQ webhook structure. Dhan Users: Plug-and-play. Other Brokers: You need middleware (NextLevelBot, Quantiply) to parse the JSON. █ Risk Disclaimer & Advice Trading options involves substantial risk. The Whipsaw Risk: In Phase 2, you are Long Calls and Short Puts. A sharp reversal causes losses on both sides. Margin: Selling options requires significant margin. Keep a 15-20% cash buffer to handle adjustments instantly. Testing: This strategy is optimized for NIFTY Weekly Options. Effectiveness on BankNifty or Stocks is untested and may require parameter tuning. Advice: Backtest: Use TradingView Replay. Paper Trade: Run for at least one expiry cycle before live deployment. Consult: Seek professional financial advice before trading. Practical Tips for Smooth Execution For a new trader deploying this system, these operational tips are vital: Capital Buffer: Do not trade at your limit. Always keep 10-15% free cash in your broker account. Adjustments (specifically Phase 2, where you sell an extra Put) require additional margin instantly. If margin is short, the order fails, and your hedge breaks. Liquidity Awareness : The script trades "Far Deep OTM" options (Leg 4) to reduce margin. On indices like Nifty/BankNifty, this is fine. On individual stocks, these deep strikes might be illiquid. Check the option chain volume before deploying on stocks. Trust the Process (but Verify) : While the algo drives, you are the pilot. Check your API connection every morning. Ensure the "Entry Window" background color on the chart matches your real-world date. Verify that your broker executed all legs of a multi-leg order (partial fills are rare but possible). The "Human" Stop: If major news breaks (e.g., unexpected election results, war announcements), volatility can expand faster than any algo can react. It is acceptable—and smart—to pause the strategy during known "Black Swan" events or earnings releases. █ Timeframe Selection: The 30-Minute Standard Critical Requirement: This indicator must be applied to a 30-minute chart. Why? Noise Filtering: The Supertrend logic is tuned to capture multi-day trends. Lower timeframes (5m, 15m) are full of "noise"—random fluctuations that look like trend changes but aren't. Execution Logic (The Hybrid Engine): The script has a built-in "Dual Timeframe" architecture. Decision Layer (30m): Uses the chart timeframe to decide when to be Bullish or Bearish. Execution Layer (5m): Internally fetches 5-minute data to manage the how (Adjustments, Late Entries, and precise invalidation). The Risk of Lower Timeframes: If you run the main chart on 5-minutes, you destroy this hierarchy. You will get too many signals, pay too much brokerage, and the internal logic may behave erratically. Recommendation: Always keep your TradingView chart interval at 30m. Do not switch to lower timeframes expecting "faster" signals; you will likely just get "false" signals. █ Testing Scope, Feedback ⚠️ Important Note on Asset Classes: This strategy logic and the associated strike step calculations have been rigorously tested ONLY on NIFTY Index Options with Weekly Expiry. BankNifty / Sensex / FinNifty: The volatility characteristics (ATR) and strike intervals of these instruments differ significantly from NIFTY. The effectiveness of this strategy on these other scripts has not been verified and may require different parameter tuning (e.g., strike_step or ATR Length). Stocks: Individual stock options often lack the liquidity required for the "Deep OTM" legs, leading to potential execution failures. We encourage traders to backtest this logic on other indices and share their findings! If you find a robust parameter set for BankNifty or observe unique behaviors on other scripts, please let us know in the comments below so we can improve the algorithm for everyone. Your feedback is appriciated.
Wskaźnik Pine Script®
od TradeWiseWithEase
4
Quality-Controlled Trend Strategy v2 (Expectancy Focused)This script focuses on quality control rather than curve-fitting. No repainting, no intrabar tricks, no fake equity curves. It uses confirmed-bar entries, ATR-based risk, and clean trend logic so backtests reflect what could actually be traded live. If you publish scripts, this is the minimum structure worth sharing. Why this script exists TradingView’s public scripts are flooded with: repainting indicators no stop-loss logic curve-fit entries that collapse live strategies that look good only in hindsight This script is intentionally boring but honest. No repainting. No intrabar tricks. No fake equity curves The goal is quality control, not hype. What this strategy enforces ✔ Confirmed bars only ✔ Single source of truth for indicators ✔ Fixed risk structure ✔ No signal repainting ✔ Clean exits with unique IDs ✔ Works on any liquid market Trading Logic (simple & auditable) Trend filter EMA 50 vs EMA 200 Entry Pullback to EMA 50 RSI confirms momentum (not oversold/overbought) Risk ATR-based stop Fixed R:R One position at a time This is the minimum bar for a strategy to be considered publish-worthy. Why this helps TradingView quality Most low-value scripts fail because they: hide repainting logic skip exits entirely use inconsistent calculations rely on hindsight candles This strategy forces discipline: every signal is confirmed every trade has defined risk behavior is repeatable across symbols & timeframes If more scripts followed this baseline, TradingView’s public library would be far more usable.
Strategia Pine Script®
od AIScripts
Golden Vector Trend Orchestrator (GVTO)Golden Vector Trend Orchestrator (GVTO) is a composite trend-following strategy specifically engineered for XAUUSD (Gold) and volatile assets on H4 (4-Hour) and Daily timeframes. This script aims to solve a common problem in trend trading: "Whipsaws in Sideways Markets." Instead of relying on a single indicator, GVTO employs a Multi-Factor Confluence System that filters out low-probability trades by requiring alignment across Trend Structure, Momentum, and Volatility. 🛠 Methodology & Logic The strategy executes trades only when four distinct technical conditions overlap (Confluence). If any single condition is not met, the trade is filtered out to preserve capital. 1. Market Structure Filter (200 EMA) Indicator: Exponential Moving Average (Length 200). Logic: The 200 EMA acts as the baseline for the long-term trend regime. Bullish Regime: Price must close above the 200 EMA. Bearish Regime: Price must close below the 200 EMA. Purpose: Prevents counter-trend trading against the macro direction. 2. Signal Trigger & Trailing Stop (Supertrend) Indicator: Supertrend (ATR Length 14, Factor 3.5). Logic: Uses Average True Range (ATR) to detect trend reversals while accounting for volatility. Purpose: Provides the specific entry signal and acts as a dynamic trailing stop-loss to let profits run while cutting losses when the trend invalidates. 3. Volatility Gatekeeper (ADX Filter) Indicator: Average Directional Index (Length 14). Threshold: > 25. Logic: A high ADX value indicates a strong trend presence, regardless of direction. Purpose: This is the most critical filter. It prevents the strategy from entering trades during "choppy" or ranging markets (consolidation zones) where trend-following systems typically fail. 4. Momentum Confirmation (DMI) Indicator: Directional Movement Index (DI+ and DI-). Logic: Checks if the buying pressure (DI+) is physically stronger than selling pressure (DI-), or vice versa. Purpose: Ensures that the price movement is backed by genuine momentum, not just a momentary price spike. 📋 How to Use This Strategy 🟢 LONG (BUY) Setup A Buy signal is generated only when ALL of the following occur simultaneously: Price Action: Price closes ABOVE the 200 EMA (Orange Line). Trigger: Supertrend flips to GREEN (Bullish). Strength: ADX is greater than 25 (Strong Trend). Momentum: DI+ (Plus Directional Indicator) is greater than DI- (Minus). 🔴 SHORT (SELL) Setup A Sell signal is generated only when ALL of the following occur simultaneously: Price Action: Price closes BELOW the 200 EMA (Orange Line). Trigger: Supertrend flips to RED (Bearish). Strength: ADX is greater than 25 (Strong Trend). Momentum: DI- (Minus Directional Indicator) is greater than DI+ (Plus). 🛡 Exit Strategy Stop Loss / Take Profit: The strategy utilizes the Supertrend Line as a dynamic Trailing Stop. Exit Long: When Supertrend turns Red. Exit Short: When Supertrend turns Green. Note: Traders can also use the real-time P/L Dashboard included in the script to manually secure profits based on their personal Risk:Reward ratio. 📊 Included Features Real-Time P/L Dashboard: A table in the top-right corner displays the current trend status, ADX strength, and the Unrealized Profit/Loss % of the current active position. Smart Labeling: Buy/Sell labels are coded to appear only on the initial entry trigger. They do not repaint and do not spam the chart if the trend continues (no pyramiding visualization). Visual Aids: Background color changes (Green/Red) to visually represent the active trend based on the Supertrend status. ⚠️ Risk Warning & Best Practices Asset Class: Optimized for XAUUSD (Gold) due to its high volatility nature. It also works well on Crypto (BTC, ETH) and Major Forex Pairs. Timeframe: Highly recommended for H4 (4 Hours) or D1 (Daily). Using this on lower timeframes (M5, M15) may result in false signals due to market noise. News Events: Automated strategies cannot predict economic news (CPI, NFP). Exercise caution or pause trading during high-impact economic releases.
Strategia Pine Script®
od Gustav_Rex
2
CryptoFlux Dynamo [JOAT]CryptoFlux Dynamo: Velocity Scalping Strategy WHAT THIS STRATEGY IS CryptoFlux Dynamo is an open-source Pine Script v6 strategy designed for momentum-based scalping on cryptocurrency perpetual futures. It combines multiple technical analysis methods into a unified system that adapts its behavior based on current market volatility conditions. This script is published open-source so you can read, understand, and modify the complete logic. The description below explains everything the strategy does so that traders who cannot read Pine Script can fully understand how it works before using it. HOW THIS STRATEGY IS ORIGINAL AND WHY THE INDICATORS ARE COMBINED This strategy uses well-known indicators (MACD, EMA, RSI, MFI, Bollinger Bands, Keltner Channels, ATR). The originality is not in the individual indicators themselves, but in the specific way they are integrated into a regime-adaptive system. Here is the detailed justification for why these components are combined and how they work together: The Problem Being Solved: Standard indicator-based strategies use fixed thresholds. For example, a typical MACD strategy might enter when the histogram crosses above zero. However, in cryptocurrency markets, volatility changes dramatically throughout the day and week. A MACD crossover during a low-volatility consolidation period has very different implications than the same crossover during a high-volatility trending period. Using the same entry thresholds and stop distances in both conditions leads to either: Too many false signals during consolidation (if thresholds are loose) Missing valid opportunities during expansion (if thresholds are tight) Stops that are too tight during volatility spikes (causing premature exits) Stops that are too wide during compression (giving back profits) The Solution Approach: This strategy first classifies the current volatility regime using normalized ATR (ATR as a percentage of price), then dynamically adjusts ALL other parameters based on that classification. This creates a context-aware system rather than a static threshold comparison. How Each Component Contributes to the System: ATR-Based Regime Classification (The Foundation) The strategy calculates ATR over 21 periods, smooths it with a 13-period EMA to reduce noise from wicks, then divides by price to get a normalized percentage. This ATR% is classified into three regimes: - Compression (ATR% < 0.8%): Market is consolidating, breakouts are more likely but false signals are common - Expansion (ATR% 0.8% - 1.6%): Normal trending conditions - Velocity (ATR% > 1.6%): High volatility, larger moves but also larger adverse excursions This regime classification then controls stop distances, profit targets, trailing stop offsets, and signal strength requirements. The regime acts as a "meta-parameter" that tunes the entire system. EMA Ribbon (8/21/34) - Trend Structure Detection The three EMAs establish trend direction and structure. When EMA 8 > EMA 21 > EMA 34, the trend structure is bullish. The slope of the middle EMA (21) is calculated over 8 bars and converted to degrees using arctangent. This slope measurement quantifies trend strength, not just direction. Why these specific periods? The 8/21/34 sequence follows Fibonacci-like spacing and provides good separation on 5-minute cryptocurrency charts. The fast EMA (8) responds to immediate price action, the mid EMA (21) represents the short-term trend, and the slow EMA (34) acts as a trend filter. The EMA ribbon works with the regime classification: during compression regimes, the strategy requires stronger ribbon alignment before entry because false breakouts are more common. MACD (8/21/5) - Momentum Measurement The MACD uses faster parameters (8/21/5) than the standard (12/26/9) because cryptocurrency markets move faster than traditional markets. The histogram is smoothed with a 5-period EMA to reduce noise. The key innovation is the adaptive histogram baseline. Instead of using a fixed threshold, the strategy calculates a rolling baseline from the smoothed absolute histogram value, then multiplies by a sensitivity factor (1.15). This means the threshold for "significant momentum" automatically adjusts based on recent momentum levels. The MACD works with the regime classification: during velocity regimes, the histogram baseline is effectively higher because recent momentum has been stronger, preventing entries on relatively weak momentum. RSI (21 period) and MFI (21 period) - Independent Momentum Confirmation RSI measures momentum using price changes only. MFI (Money Flow Index) measures momentum using price AND volume. By requiring both to confirm, the strategy filters out price moves that lack volume support. The 21-period length is longer than typical (14) to reduce noise on 5-minute charts. The trigger threshold (55 for longs, 45 for shorts) is slightly offset from 50 to require momentum in the trade direction, not just neutral readings. These indicators work together: a signal requires RSI > 55 AND MFI > 55 for longs. This dual confirmation reduces false signals from price manipulation or low-volume moves. Bollinger Bands (1.5 mult) and Keltner Channels (1.8 mult) - Squeeze Detection When Bollinger Bands contract inside Keltner Channels, volatility is compressing and a breakout is likely. This is the "squeeze" condition. When the bands expand back outside the channels, the squeeze "releases." The strategy uses a 1.5 multiplier for Bollinger Bands (tighter than standard 2.0) and 1.8 for Keltner Channels. These values were chosen to identify meaningful squeezes on 5-minute cryptocurrency charts without triggering too frequently. The squeeze detection works with the regime classification: squeeze releases during compression regimes receive additional signal strength points because breakouts from consolidation are more significant. Volume Impulse Detection - Institutional Participation Filter The strategy calculates a volume baseline (34-period SMA) and standard deviation. A "volume impulse" is detected when current volume exceeds the baseline by 1.15x OR when the volume z-score exceeds 0.5. This filter ensures entries occur when there is meaningful market participation, not during low-volume periods where price moves are less reliable. Volume impulse is required for all entries and adds points to the composite signal strength score. Cycle Oscillator - Trend Alignment Filter The strategy calculates a 55-period EMA as a cycle basis, then measures price deviation from this basis as a percentage. When price is more than 0.15% above the cycle basis, the cycle is bullish. When more than 0.15% below, the cycle is bearish. This filter prevents counter-trend entries. Long signals require bullish cycle alignment; short signals require bearish cycle alignment. BTC Dominance Filter (Optional) - Market Regime Filter The strategy can optionally use BTC.D (Bitcoin Dominance) as a market regime filter. When BTC dominance is rising (slope > 0.12), the market is in "risk-off" mode and long entries on altcoins are filtered. When dominance is falling (slope < -0.12), short entries are filtered. This filter is optional because the BTC.D data feed may lag during low-liquidity periods. How The Components Work Together (The Mashup Justification): The strategy uses a composite scoring system where each signal pathway contributes points: Trend Break pathway (30 points): Requires EMA ribbon alignment + positive slope + price breaks above recent structure high Momentum Surge pathway (30 points): Requires MACD histogram > adaptive baseline + MACD line > signal + RSI > 55 + MFI > 55 + volume impulse Squeeze Release pathway (25 points): Requires BB inside KC (squeeze) then release + momentum bias + histogram confirmation Micro Pullback pathway (15 points): Requires shallow retracement to fast EMA within established trend + histogram confirmation + volume impulse Additional modifiers: +5 points if volume impulse is present, -5 if absent +5 points in velocity regime, -2 in compression regime +5 points if cycle is aligned, -5 if counter-trend A trade only executes when the composite score reaches the minimum threshold (default 55) AND all filters agree (session, cycle bias, BTC dominance if enabled). This scoring system is the core innovation: instead of requiring ALL conditions to be true (which would generate very few signals) or ANY condition to be true (which would generate too many false signals), the strategy requires ENOUGH conditions to be true, with different conditions contributing different weights based on their reliability. HOW THE STRATEGY CALCULATES ENTRIES AND EXITS Entry Logic: 1. Calculate current volatility regime from ATR% 2. Calculate all indicator values (MACD, EMA, RSI, MFI, squeeze, volume) 3. Evaluate each signal pathway and sum points 4. Check all filters (session, cycle, dominance, kill switch) 5. If composite score >= 55 AND all filters pass, generate entry signal 6. Calculate position size based on risk per trade and regime-adjusted stop distance 7. Execute entry with regime name as comment Position Sizing Formula: RiskCapital = Equity * (0.65 / 100) StopDistance = ATR * StopMultiplier(regime) RawQuantity = RiskCapital / StopDistance MaxQuantity = Equity * (12 / 100) / Price Quantity = min(RawQuantity, MaxQuantity) Quantity = round(Quantity / 0.001) * 0.001 This ensures each trade risks approximately 0.65% of equity regardless of volatility, while capping total exposure at 12% of equity. Stop Loss Calculation: Stop distance is ATR multiplied by a regime-specific multiplier: Compression regime: 1.05x ATR (tighter stops because moves are smaller) Expansion regime: 1.55x ATR (standard stops) Velocity regime: 2.1x ATR (wider stops to avoid premature exits during volatility) Take Profit Calculation: Target distance is ATR multiplied by regime-specific multiplier and base risk/reward: Compression regime: 1.6x ATR * 1.8 base R:R * 0.9 regime bonus = approximately 2.6x ATR Expansion regime: 2.05x ATR * 1.8 base R:R * 1.0 regime bonus = approximately 3.7x ATR Velocity regime: 2.8x ATR * 1.8 base R:R * 1.15 regime bonus = approximately 5.8x ATR Trailing Stop Logic: When adaptive trailing is enabled, the strategy calculates a trailing offset based on ATR and regime: Compression regime: 1.1x base offset (looser trailing to avoid noise) Expansion regime: 1.0x base offset (standard) Velocity regime: 0.8x base offset (tighter trailing to lock in profits during fast moves) The trailing stop only activates when it would be tighter than the initial stop. Momentum Fail-Safe Exits: The strategy closes positions early if momentum reverses: Long positions close if MACD histogram turns negative OR EMA ribbon structure breaks (fast EMA crosses below mid EMA) Short positions close if MACD histogram turns positive OR EMA ribbon structure breaks This prevents holding through momentum reversals even if stop loss hasn't been hit. Kill Switch: If maximum drawdown exceeds 6.5%, the strategy disables new entries until manually reset. This prevents continued trading during adverse conditions. HOW TO USE THIS STRATEGY Step 1: Apply to Chart Use a 5-minute chart of a high-liquidity cryptocurrency perpetual (BTC/USDT, ETH/USDT recommended) Ensure at least 200 bars of history are loaded for indicator stabilization Use standard candlestick charts only (not Heikin Ashi, Renko, or other non-standard types) Step 2: Understand the Visual Elements EMA Ribbon: Three lines (8/21/34 periods) showing trend structure. Bullish when stacked upward, bearish when stacked downward. Background Color: Shows current volatility regime - Indigo/dark blue = Compression (low volatility) - Purple = Expansion (normal volatility) - Magenta/pink = Velocity (high volatility) Bar Colors: Reflect signal strength divergence. Brighter colors indicate stronger directional bias. Triangle Markers: Entry signals. Up triangles below bars = long entry. Down triangles above bars = short entry. Dashboard (top-right): Real-time display of regime, ATR%, signal strengths, position status, stops, targets, and risk metrics. Step 3: Interpret the Dashboard Regime: Current volatility classification (Compression/Expansion/Velocity) ATR%: Normalized volatility as percentage of price Long/Short Strength: Current composite signal scores (0-100) Cycle Osc: Price deviation from 55-period EMA as percentage Dominance: BTC.D slope and filter status Position: Current position direction or "Flat" Stop/Target: Current stop loss and take profit levels Kill Switch: Status of drawdown protection Volume Z: Current volume z-score Impulse: Whether volume impulse condition is met Step 4: Adjust Parameters for Your Needs For more conservative trading: Increase "Minimum Composite Signal Strength" to 65 or higher For more aggressive trading: Decrease to 50 (but expect more false signals) For higher timeframes (15m+): Increase "Structure Break Window" to 12-15, increase "RSI Momentum Trigger" to 58 For lower liquidity pairs: Increase "Volume Impulse Multiplier" to 1.3, increase slippage in strategy properties To disable short selling: Uncheck "Enable Short Structure" To disable BTC dominance filter: Uncheck "BTC Dominance Confirmation" STRATEGY PROPERTIES (BACKTEST SETTINGS) These are the exact settings used in the strategy's Properties dialog box. You must use these same settings when evaluating the backtest results shown in the publication: Initial Capital: $100,000 Justification: This amount is higher than typical retail accounts. I chose this value to demonstrate percentage-based returns that scale proportionally. The strategy uses percentage-based position sizing (0.65% risk per trade), so a $10,000 account would see the same percentage returns with 10x smaller position sizes. The absolute dollar amounts in the backtest should be interpreted as percentages of capital. Commission: 0.04% (commission_value = 0.04) Justification: This reflects typical perpetual futures exchange fees. Major exchanges charge between 0.02% (maker) and 0.075% (taker). The 0.04% value is a reasonable middle estimate. If your exchange charges different fees, adjust this value accordingly. Higher fees will reduce net profitability. Slippage: 1 tick Justification: This is conservative for liquid pairs like BTC/USDT on major exchanges during normal conditions. For less liquid altcoins or during high volatility, actual slippage may be higher. If you trade less liquid pairs, increase this value to 2-3 ticks for more realistic results. Pyramiding: 1 Justification: No position stacking. The strategy holds only one position at a time. This simplifies risk management and prevents overexposure. calc_on_every_tick: true Justification: The strategy evaluates on every price update, not just bar close. This is necessary for scalping timeframes where waiting for bar close would miss opportunities. Note that this setting means backtest results may differ slightly from bar-close-only evaluation. calc_on_order_fills: true Justification: The strategy recalculates immediately after order fills for faster response to position changes. RISK PER TRADE JUSTIFICATION The default risk per trade is 0.65% of equity. This is well within the TradingView guideline that "risking more than 5-10% on a trade is not typically considered viable." With the 12% maximum exposure cap, even if the strategy takes multiple consecutive losses, the total risk remains manageable. The kill switch at 6.5% drawdown provides additional protection by halting new entries during adverse conditions. The position sizing formula ensures that stop distance (which varies by regime) is accounted for, so actual risk per trade remains approximately 0.65% regardless of volatility conditions. SAMPLE SIZE CONSIDERATIONS For statistically meaningful backtest results, you should select a dataset that generates at least 100 trades. On 5-minute BTC/USDT charts, this typically requires: 2-3 months of data during normal market conditions 1-2 months during high-volatility periods 3-4 months during low-volatility consolidation periods The strategy's selectivity (requiring 55+ composite score plus all filters) means it generates fewer signals than less filtered approaches. If your backtest shows fewer than 100 trades, extend the date range or reduce the minimum signal strength threshold. Fewer than 100 trades produces statistically unreliable results. Win rate, profit factor, and other metrics can vary significantly with small sample sizes. STRATEGY DESIGN COMPROMISES AND LIMITATIONS Every strategy involves trade-offs. Here are the compromises made in this design and the limitations you should understand: Selectivity vs. Opportunity Trade-off The 55-point minimum threshold filters many potential trades. This reduces false signals but also misses valid setups that don't meet all criteria. Lowering the threshold increases trade frequency but decreases win rate. There is no "correct" threshold; it depends on your preference for fewer higher-quality signals vs. more signals with lower individual quality. Regime Classification Lag The ATR-based regime detection uses historical data (21 periods + 13-period smoothing). It cannot predict sudden volatility spikes. During flash crashes or black swan events, the strategy may be classified in the wrong regime for several bars before the classification updates. This is an inherent limitation of any lagging indicator. Indicator Parameter Sensitivity The default parameters (MACD 8/21/5, EMA 8/21/34, RSI 21, etc.) are tuned for BTC/ETH perpetuals on 5-minute charts during 2024 market conditions. Different assets, timeframes, or market regimes may require different parameters. There is no guarantee that parameters optimized on historical data will perform similarly in the future. BTC Dominance Filter Limitations The CRYPTOCAP:BTC.D data feed may lag during low-liquidity periods or weekends. The dominance slope calculation uses a 5-bar SMA, adding additional delay. If you notice the filter behaving unexpectedly, consider disabling it. Backtest vs. Live Execution Differences TradingView backtesting does not replicate actual broker execution. Key differences: Backtests assume perfect fills at calculated prices; real execution involves order book depth, latency, and partial fills The calc_on_every_tick setting improves backtest realism but still cannot capture sub-bar price action or order book dynamics Commission and slippage settings are estimates; actual costs vary by exchange, time of day, and market conditions Funding rates on perpetual futures are not modeled in backtests and can significantly impact profitability over time Exchange-specific limitations (position limits, liquidation mechanics, order types) are not modeled Market Condition Dependencies This strategy is designed for trending and breakout conditions. During extended sideways consolidation with no clear direction, the strategy may generate few signals or experience whipsaws. No strategy performs well in all market conditions. Cryptocurrency-Specific Risks Cryptocurrency markets operate 24/7 without session boundaries. This means: No natural "overnight" risk reduction Volatility can spike at any time Liquidity varies significantly by time of day Exchange outages or issues can occur at any time WHAT THIS STRATEGY DOES NOT DO To be straightforward about limitations: This strategy does not guarantee profits. Past backtest performance does not indicate future results. This strategy does not predict the future. It reacts to current conditions based on historical patterns. This strategy does not account for funding rates, which can significantly impact perpetual futures profitability. This strategy does not model exchange-specific execution issues (partial fills, requotes, outages). This strategy does not adapt to fundamental news events or black swan scenarios. This strategy is not optimized for all market conditions. It may underperform during extended consolidation. IMPORTANT RISK WARNINGS Past performance does not guarantee future results. The backtest results shown reflect specific historical market conditions and parameter settings. Markets change constantly, and strategies that performed well historically may underperform or lose money in the future. A single backtest run does not constitute proof of future profitability. Trading involves substantial risk of loss. Cryptocurrency derivatives are highly volatile instruments. You can lose your entire investment. Only trade with capital you can afford to lose completely. This is not financial advice. This strategy is provided for educational and informational purposes only. It does not constitute investment advice, trading recommendations, or any form of financial guidance. The author is not a licensed financial advisor. You are responsible for your own decisions. Before using this strategy with real capital: Thoroughly understand the code and logic by reading the open-source implementation Forward test with paper trading or very small positions for an extended period Verify that commission, slippage, and execution assumptions match your actual trading environment Understand that live results will differ from backtest results Consider consulting with a qualified financial advisor No guarantees or warranties. This strategy is provided "as is" without any guarantees of profitability, accuracy, or suitability for any purpose. The author is not responsible for any losses incurred from using this strategy. OPEN-SOURCE CODE STRUCTURE The strategy code is organized into these sections for readability: Configuration Architecture: Input parameters organized into logical groups (Core Controls, Optimization Constants, Regime Intelligence, Signal Pathways, Risk Architecture, Visualization) Helper Functions: calcQty() for position sizing, clamp01() and normalize() for value normalization, calcMFI() for Money Flow Index calculation Core Indicator Engine: EMA ribbon, ATR and regime classification, MACD with adaptive baseline, RSI, MFI, volume analytics, cycle oscillator, BTC dominance filter, squeeze detection Signal Pathway Logic: Trend break, momentum surge, squeeze release, micro pullback pathways with composite scoring Entry/Exit Orchestration: Signal filtering, position sizing, entry execution, stop/target calculation, trailing stop logic, momentum fail-safe exits Visualization Layer: EMA plots, regime background, bar coloring, signal labels, dashboard table You can read and modify any part of the code. Understanding the logic before deployment is strongly recommended. - Made with passion by officialjackofalltrades
Strategia Pine Script®
od officialjackofalltrades
Max Pain Options [QuantLabs] v5 (Balanced)Institutional Grade Options Analysis: Max Pain, Gamma & Pin Risk For years, TradingView users have been flying blind without access to Options Chain data. QuantLabs: Max Pain & Gamma Exposure changes that. This is not just a support/resistance indicator—it is a sophisticated, algorithmic model that reverse-engineers the incentives of Market Makers using synthetic Black-Scholes logic. This tool visualizes the "invisible hand" of the market: the hedging requirements of large dealers who are forced to buy or sell to keep their books neutral. CORE FEATURES: 🔴 Max Pain Gravity Model The bright red line represents the "Max Pain" strike—the price level where the maximum amount of Options Open Interest (Calls + Puts) expires worthless. Theory: As OpEx (Expiration) approaches, Market Makers maximize profits by pinning the price to this level. Strategy: Use this as a mean-reversion target. If price is far away, look for a snap-back to the red line. 🟣 Gamma Exposure Profiles (The Purple Lines) These neon histograms show you the estimated "Gamma Walls." Long Gamma: Dealers trade against the trend (stabilizing price). Short Gamma: Dealers trade with the trend (accelerating volatility). Visual: The larger the purple bar, the harder it will be for price to break through that level. 📦 Algorithmic "Pin Risk" Zones The dashed red box highlights the "Kill Zone." When price enters this area near expiration, volatility often dies as dealers pin the asset to kill retail premiums. Warning: Do not expect breakouts while inside the Pin Zone. 📊 Institutional HUD A clean, non-intrusive dashboard provides real-time Greeks and risk analysis: Pin Risk: High/Medium/Low probability of a pinned close. Exp Mode: Detects if the market is in "Short Gamma" (Squeeze territory) or "Long Gamma" (Chop territory). HOW IT WORKS (The Math): Since live options data is not available via Pine Script, this engine uses a proprietary Synthetic OI Distribution Model. It inputs Volume, Volatility (IV), and Time-to-Expiry into a modified Black-Scholes equation to probability-map where the heavy open interest likely sits. SETTINGS & CUSTOMIZATION: Responsiveness: Tuned for the "Goldilocks Zone" (Spread: 12, Decay: 22) to catch local liquidity walls without over-fitting. Visuals: Designed for Dark Mode. High-contrast Neon aesthetics for maximum readability.
Wskaźnik Pine Script®
od CustomQuantLabs
4
Liquidity Maxing [JOAT]Liquidity Maxing - Institutional Liquidity Matrix Introduction Liquidity Maxing is an open-source strategy for TradingView built around institutional market structure concepts. It identifies structural shifts, evaluates trades through multi-factor confluence, and implements layered risk controls. The strategy is designed for swing trading on 4-hour timeframes, focusing on how institutional order flow manifests in price action through structure breaks, inducements, and liquidity sweeps. Core Functionality Liquidity Maxing performs three primary functions: Tracks market structure to identify when control shifts between buyers and sellers Scores potential trades using an eight-factor confluence system Manages position sizing and risk exposure dynamically based on volatility and user-defined limits The goal is selective trading when multiple conditions align, rather than frequent entries. Market Structure Engine The structure engine tracks three key events: Break of Structure (BOS): Price pushes beyond a prior pivot in the direction of trend Change of Character (CHoCH): Control flips from bullish to bearish or vice versa Inducement Sweeps (IDM): Market briefly runs stops against trend before moving in the real direction The structure module continuously updates strong highs and lows, labeling structural shifts visually. IDM markers are optional and disabled by default to maintain chart clarity. The trade engine requires valid structure alignment before considering entries. No structure, no trade. Eight-Factor Confluence System Instead of relying on a single indicator, Liquidity Maxing uses an eight-factor scoring system: Structure alignment with current trend RSI within healthy bands (different ranges for up and down trends) MACD momentum agreement with direction Volume above adaptive baseline Price relative to main trend EMA Session and weekend filter (configurable) Volatility expansion/contraction via ATR shifts Higher-timeframe EMA confirmation Each factor contributes one point to the confluence score. The default minimum confluence threshold is 6 out of 8, but you can adjust this from 1-8 based on your preference for trade frequency versus selectivity. Only when structure and confluence agree does the strategy proceed to risk evaluation. Dynamic Risk Management Risk controls are implemented in multiple layers: ATR-based stops and targets with configurable risk-to-reward ratio (default 2:1) Volatility-adjusted position sizing to maintain consistent risk per trade as ranges expand or compress Daily and weekly risk budgets that halt new entries once thresholds are reached Correlation cooldown to prevent clustered trades in the same direction Global circuit breaker with maximum drawdown limit and emergency kill switch If any guardrail is breached, the strategy will not open new positions. The dashboard clearly displays risk state for transparency. Market Presets The strategy includes configuration presets optimized for different market types: Crypto (BTC/ETH): RSI bands 70/30, volume multiplier 1.2, enhanced ATR scaling Forex Majors: RSI bands 75/25, volume multiplier 1.5 Indices (SPY/QQQ): RSI bands 70/30, volume multiplier 1.3 Custom: Default values for user customization For crypto assets, the strategy automatically applies ATR volatility scaling to account for higher volatility characteristics. Monitoring and Dashboards The strategy includes optional monitoring layers: Risk Operations Dashboard (top-right): Trend state Confluence score ATR value Current position size percentage Global drawdown Daily and weekly risk consumption Correlation guard state Alert mode status Performance Console (top-left): Net profit Current equity Win rate percentage Average trade value Sharpe-style ratio (rolling 50-bar window) Profit factor Open trade count Optional risk tint on chart background provides visual indication of "safe to trade" versus "halted" state. All visualization elements can be toggled on/off from the inputs for clean chart viewing or full telemetry during parameter tuning. Alerts and Automation The strategy supports alert integration with two formats: Standard alerts: Human-readable messages for long, short, and risk-halt conditions Webhook format: JSON-formatted payloads ready for external execution systems (optional) Alert messages are predictable and unambiguous, suitable for manual review or automated forwarding to execution engines. Built-in Validation Suite The strategy includes an optional validation layer that can be enabled from inputs. It checks: Internal consistency of structure and confluence metrics Sanity and ordering of risk parameters Position sizing compliance with user-defined floors and caps This validation is optional and not required for trading, but provides transparency into system operation during development or troubleshooting. Strategy Parameters Market Presets: Configuration Preset: Choose between Crypto (BTC/ETH), Forex Majors, Indices (SPY/QQQ), or Custom Market Structure Architecture: Pivot Length: Default 5 bars Filter by Inducement (IDM): Default enabled Visualize Structure: Default enabled Structure Lookback: Default 50 bars Risk & Capital Preservation: Risk:Reward Ratio: Default 2.0 ATR Period: Default 14 ATR Multiplier (Stop): Default 2.0 Max Drawdown Circuit Breaker: Default 10% Risk per Trade (% Equity): Default 1.5% Daily Risk Limit: Default 6% Weekly Risk Limit: Default 12% Min Position Size (% Equity): Default 0.25% Max Position Size (% Equity): Default 5% Correlation Cooldown (bars): Default 3 Emergency Kill Switch: Default disabled Signal Confluence: RSI Length: Default 14 Trend EMA: Default 200 HTF Confirmation TF: Default Daily Allow Weekend Trading: Default enabled Minimum Confluence Score (0-8): Default 6 Backtesting Considerations When backtesting this strategy, consider the following: Commission: Default 0.05% (adjustable in strategy settings) Initial Capital: Default $100,000 (adjustable) Position Sizing: Uses percentage of equity (default 2% per trade) Timeframe: Optimized for 4-hour charts, though can be tested on other timeframes Results will vary significantly based on: Market conditions and volatility regimes Parameter settings, especially confluence threshold Risk limit configuration Symbol characteristics (crypto vs forex vs equities) Past performance does not guarantee future results. Win rate, profit factor, and other metrics should be evaluated in context of drawdown periods, trade frequency, and market conditions. How to Use This Strategy This is a framework that requires understanding and parameter tuning, not a one-size-fits-all solution. Recommended workflow: Start on 4-hour timeframe with default parameters and appropriate market preset Run backtests and study performance console metrics: focus on drawdown behavior, win rate, profit factor, and trade frequency Adjust confluence threshold to match your risk appetite—higher thresholds mean fewer but more selective trades Set realistic daily and weekly risk budgets appropriate for your account size and risk tolerance Consider ATR multiplier adjustments based on market volatility characteristics Only connect alerts or automation after thorough testing and parameter validation Treat this as a risk framework with an integrated entry engine, not merely an entry signal generator. The risk controls are as important as the trade signals. Strategy Limitations Designed for swing trading timeframes; may not perform optimally on very short timeframes Requires sufficient market structure to identify pivots; may struggle in choppy or low-volatility environments Crypto markets require different parameter tuning than traditional markets Risk limits may prevent entries during favorable setups if daily/weekly budgets are exhausted Correlation cooldown may delay entries that would otherwise be valid Backtesting results depend on data quality and may not reflect live trading with slippage Design Philosophy Many indicators tell you when price crossed a moving average or RSI left oversold. This strategy addresses questions institutional traders ask: Who is in control of the market right now? Is this move structurally significant or just noise? Do I want to add more risk given what I've already done today/week? If I'm wrong, exactly how painful can this be? The strategy provides disciplined, repeatable answers to these questions through systematic structure analysis, confluence filtering, and multi-layer risk management. Technical Implementation The strategy uses Pine Script v6 with: Custom types for structure, confluence, and risk state management Functional programming approach for reusable calculations State management through persistent variables Optional visual elements that can be toggled independently The code is open-source and can be modified to suit individual needs. All important logic is visible in the source code. Disclaimer This script is provided for educational and informational purposes only. It is not intended as financial, investment, trading, or any other type of advice or recommendation. Trading involves substantial risk of loss and is not suitable for all investors. Past performance, whether real or indicated by historical tests of strategies, is not indicative of future results. No representation is being made that any account will or is likely to achieve profits or losses similar to those shown. In fact, there are frequently sharp differences between backtested results and actual results subsequently achieved by any particular trading strategy. The user should be aware of the risks involved in trading and should trade only with risk capital. The authors and publishers of this script are not responsible for any losses or damages, including without limitation, any loss of profit, which may arise directly or indirectly from use of or reliance on this script. This strategy uses technical analysis methods and indicators that are not guaranteed to be accurate or profitable. Market conditions change, and strategies that worked in the past may not work in the future. Users should thoroughly test any strategy in a paper trading environment before risking real capital. Commission and slippage settings in backtests may not accurately reflect live trading conditions. Real trading results will vary based on execution quality, market liquidity, and other factors not captured in backtesting. The user assumes full responsibility for all trading decisions made using this script. Always consult with a qualified financial advisor before making investment decisions. Enjoy - officialjackofalltrades
Strategia Pine Script®
od officialjackofalltrades
ML Adaptive SuperTrend Strategy [trade_crush]# ML Adaptive SuperTrend Strategy - User Guide ## Introduction The **ML Adaptive SuperTrend Strategy** is a sophisticated trading tool that combines traditional trend-following logic with **Machine Learning (K-Means Clustering)** to dynamically adapt to market volatility. Unlike standard SuperTrend indicators that use a fixed ATR, this strategy analyzes historical volatility to categorize the current market into distinct clusters, providing more precise entries and exits. > > **Special Thanks:** This strategy is based on the innovative work of **AlgoAlpha**. You can explore their extensive library of high-quality indicators and strategies on TradingView: (www.tradingview.com). --- ## Machine Learning Engine (K-Means) The core of this strategy is its ability to "learn" from recent market behavior. - **K-Means Clustering**: The script takes the last $N$ bars of ATR data and runs an iterative clustering algorithm to find three "centroids" representing **High**, **Medium**, and **Low** volatility. - **Adaptive ATR**: Based on the current volatility, the strategy selects the nearest centroid to use as the ATR value for the SuperTrend calculation. This ensures the trailing stop tightens during low volatility and widens during high volatility to avoid "noise". --- ## Key Features ### 1. Non-Repainting Signals - **Confirm Signals**: When enabled, signals are only triggered after a bar closes. This ensures that the arrows and entries you see on the chart are permanent and reliable for backtesting. ### 2. Intelligent Risk Management - **Multiple SL/TP Types**: Choose between **Percentage** based stops or **ATR** based stops for both Stop Loss and Take Profit. - **Trailing Stop Loss (TSL)**: - Supports both Percentage and ATR modes. - **Activation Offset**: Only activates the trailing mechanism after the price has moved a certain percentage in your favor, protecting early-stage trades. ### 3. Risk-Based Position Sizing - **Dynamic Quantity**: If enabled, the strategy automatically calculates the trade size based on your **Risk % Per Trade** and the distance to your **Stop Loss**. This ensures you never lose more than your defined risk on a single trade. --- ## User Input Guide ### SuperTrend & ML Settings - **ATR Length**: The window used to calculate market volatility. - **SuperTrend Factor**: The multiplier that determines the distance of the trailing stop from the price. - **Use ML Adaptive ATR**: Toggle between the ML-enhanced logic and standard ATR. - **Training Data Length**: How many historical bars the ML engine analyzes to find clusters. ### Risk Management - **Stop Loss Type**: Set to Percentage, ATR, or None. - **TS Activation Offset**: The profit buffer required before the trailing stop starts following the price. - **Use Risk-Based Sizing**: Toggle this to let the script manage your position size automatically. --- ## How to Trade with This Strategy 1. **Monitor the Dashboard**: Check the top-right table to see which volatility cluster the market is currently in. 2. **Observe the Fills**: The adaptive fills (green/red) visualize the "breathing room" the strategy is giving the price. 3. **Execution**: The strategy enters on "ML Bullish" (Triangle Up) and "ML Bearish" (Triangle Down) signals. 4. **Exits**: The script will automatically exit based on your SL, TP, or Trailing Stop settings. --- ## Credits Original Concept: **AlgoAlpha** Strategy Conversion & Enhancements: **Antigravity AI**
Strategia Pine Script®
od trade_crush
Antigravity OCC Strategy (MA 5 + Delayed TSL)# OCC Strategy Optimized (MA 5 + Delayed TSL) - User Guide ## Introduction The **OCC Strategy Optimized** is an enhanced version of the classic **Open Close Cross (OCC)** strategy. This strategy is designed for high-precision trend following, utilizing the crossover logic of Open and Close moving averages to identify market shifts. This optimized version incorporates advanced risk management, multi-timeframe analysis, and a variety of moving average types to provide a robust trading solution for modern markets. > > **Special Thanks:** This strategy is based on the original work of **JustUncleL**, a renowned Pine Script developer. You can find their work and profile on TradingView here: (in.tradingview.com). --- ## Key Features ### 1. Optimized Core Logic - **MA Period (Default: 5):** The strategy is tuned with a shorter MA length to reduce lag and capture trends earlier. - **Crossing Logic:** Signals are generated when the Moving Average of the **Close** crosses the Moving Average of the **Open**. ### 2. Multi-Timeframe (MTF) Analysis - **Alternate Resolution:** Use a higher timeframe (Resolution Multiplier) to filter out noise. By default, it uses $3 \times$ your current chart timeframe to confirm the trend. - **Non-Repainting:** Includes an optional delay offset to ensure signals are confirmed and do not disappear (repaint) after the bar closes. ### 3. Advanced Risk Management This script features a hierarchical exit system to protect your capital and lock in profits: - **Fixed Stop Loss (Initial):** Protects against sudden market reversals immediately after entry. - **Delayed Trailing Stop Loss (TSL):** - **Activation Delay:** The TSL only activates after the trade reaches a specific profit threshold (e.g., 1%). This prevents being stopped out too early in the trade's development. - **Ratchet Trail:** Once activated, the stop loss "ratchets" up/down, never moving backward, ensuring you lock in profits as the trend continues. - **Take Profit (TP):** A fixed percentage target to exit the trade at a pre-defined profit level. ### 4. Versatility - **12 MA Types:** Choose from SMA, EMA, DEMA, TEMA, WMA, VWMA, SMMA, HullMA, LSMA, ALMA, SSMA, and TMA. - **Trade Direction:** Toggle between Long-only, Short-only, or Both. - **Visuals:** Optional bar coloring to visualize the trend directly on the candlesticks. --- ## User Input Guide ### Core Settings - **Use Alternate Resolution?:** Enable this to use the MTF logic. - **Multiplier for Alternate Resolution:** How many charts higher the "filter" timeframe should be. - **MA Type:** Select your preferred moving average smoothing method. - **MA Period:** The length of the Open/Close averages. - **Delay Open/Close MA:** Use `1` or higher to force non-repainting behavior. ### Risk Management Settings - **Use Trailing Stop Loss?:** Enables the TSL system. - **Trailing Stop %:** The distance the stop follows behind the price. - **TSL Activation % (Delay):** The profit % required before the TSL starts moving. - **Initial Fixed Stop Loss %:** Your hard stop if the trade immediately goes against you. - **Take Profit %:** Your ultimate profit target for the trade. --- ## How to Trade with This Strategy 1. **Identify the Trend:** Look for the Moving Average lines (Close vs Open) to cross. 2. **Wait for Confirmation:** If using MTF, ensure the higher timeframe also shows a trend change. 3. **Manage the Trade:** Let the TSL work. Once the trade hits the activation threshold, the TSL will take over, protecting your runner. 4. **Position Sizing:** Adjust the `Properties` tab in the script settings to match your desired capital allocation (Default is 10% of equity). --- ## Credits Original Strategy by: **JustUncleL** Optimized and Enhanced by: **Antigravity AI**
Strategia Pine Script®
od trade_crush
13
Selected Days Indicator V3-TrDoes the stock drop every Wednesday? Do March months always move similarly? Does the 1st week of the month behave differently? Do you ever say "it always makes this move in these months"? Don't you want to see more clearly whether it actually makes this move or not? Don't you want to see and test periodically repeating price patterns? Hisse her Çarşamba düşüyor mu? Mart ayları hep benzer mi hareket ediyor? Ayın 1. haftası farklı mı davranıyor? Bazen "bu aylarda hep bu hareketi yapıyor" dediğiniz oluyor mu? Gerçekten de bu hareketi yapıp yapmadığını daha net görmek istemez misiniz? Periyodik tekrarlayan fiyat kalıplarını görmek ve test etmek istemiyor musunuz? 1. Problem Some stocks or crypto assets exhibit systematic behaviors on certain days, weeks, or months. But it's hard to see - everything is mixed together on the chart. This indicator isolates the days/weeks/months you want and shows only them. Hides everything else. 2. How It Works Three-layer filter: Day (Monday, Tuesday...), Week (1st, 2nd, 3rd week of the month), Month (January, February...). Select what you want, let the rest disappear. Example: Show only Thursdays of March-June-September. Or compare every 1st week of the month. View as candlestick, line, or column chart. 3. What's It Good For? Test "end-of-month effect". Find "day-of-the-week anomaly". Analyze crypto volatility by days. See seasonality in commodities. Discover patterns specific to your own strategy. Past data doesn't guarantee the future but provides statistical advantage.
Wskaźnik Pine Script®
od ExperiMentalist
Volatility Targeting: Single Asset [BackQuant]Volatility Targeting: Single Asset An educational example that demonstrates how volatility targeting can scale exposure up or down on one symbol, then applies a simple EMA cross for long or short direction and a higher timeframe style regime filter to gate risk. It builds a synthetic equity curve and compares it to buy and hold and a benchmark. Important disclaimer This script is a concept and education example only . It is not a complete trading system and it is not meant for live execution. It does not model many real world constraints, and its equity curve is only a simplified simulation. If you want to trade any idea like this, you need a proper strategy() implementation, realistic execution assumptions, and robust backtesting with out of sample validation. Single asset vs the full portfolio concept This indicator is the single asset, long short version of the broader volatility targeted momentum portfolio concept. The original multi asset concept and full portfolio implementation is here: That portfolio script is about allocating across multiple assets with a portfolio view. This script is intentionally simpler and focuses on one symbol so you can clearly see how volatility targeting behaves, how the scaling interacts with trend direction, and what an equity curve comparison looks like. What this indicator is trying to demonstrate Volatility targeting is a risk scaling framework. The core idea is simple: If realized volatility is low relative to a target, you can scale position size up so the strategy behaves like it has a stable risk budget. If realized volatility is high relative to a target, you scale down to avoid getting blown around by the market. Instead of always being 1x long or 1x short, exposure becomes dynamic. This is often used in risk parity style systems, trend following overlays, and volatility controlled products. This script combines that risk scaling with a simple trend direction model: Fast and slow EMA cross determines whether the strategy is long or short. A second, longer EMA cross acts as a regime filter that decides whether the system is ACTIVE or effectively in CASH. An equity curve is built from the scaled returns so you can visualize how the framework behaves across regimes. How the logic works step by step 1) Returns and simple momentum The script uses log returns for the base return stream: ret = log(price / price ) It also computes a simple momentum value: mom = price / price - 1 In this version, momentum is mainly informational since the directional signal is the EMA cross. The lookback input is shared with volatility estimation to keep the concept compact. 2) Realized volatility estimation Realized volatility is estimated as the standard deviation of returns over the lookback window, then annualized: vol = stdev(ret, lookback) * sqrt(tradingdays) The Trading Days/Year input controls annualization: 252 is typical for traditional markets. 365 is typical for crypto since it trades daily. 3) Volatility targeting multiplier Once realized vol is estimated, the script computes a scaling factor that tries to push realized volatility toward the target: volMult = targetVol / vol This is then clamped into a reasonable range: Minimum 0.1 so exposure never goes to zero just because vol spikes. Maximum 5.0 so exposure is not allowed to lever infinitely during ultra low volatility periods. This clamp is one of the most important “sanity rails” in any volatility targeted system. Without it, very low volatility regimes can create unrealistic leverage. 4) Scaled return stream The per bar return used for the equity curve is the raw return multiplied by the volatility multiplier: sr = ret * volMult Think of this as the return you would have earned if you scaled exposure to match the volatility budget. 5) Long short direction via EMA cross Direction is determined by a fast and slow EMA cross on price: If fast EMA is above slow EMA, direction is long. If fast EMA is below slow EMA, direction is short. This produces dir as either +1 or -1. The scaled return stream is then signed by direction: avgRet = dir * sr So the strategy return is volatility targeted and directionally flipped depending on trend. 6) Regime filter: ACTIVE vs CASH A second EMA pair acts as a top level regime filter: If fast regime EMA is above slow regime EMA, the system is ACTIVE. If fast regime EMA is below slow regime EMA, the system is considered CASH, meaning it does not compound equity. This is designed to reduce participation in long bear phases or low quality environments, depending on how you set the regime lengths. By default it is a classic 50 and 200 EMA cross structure. Important detail, the script applies regime_filter when compounding equity, meaning it uses the prior bar regime state to avoid ambiguous same bar updates. 7) Equity curve construction The script builds a synthetic equity curve starting from Initial Capital after Start Date . Each bar: If regime was ACTIVE on the previous bar, equity compounds by (1 + netRet). If regime was CASH, equity stays flat. Fees are modeled very simply as a per bar penalty on returns: netRet = avgRet - (fee_rate * avgRet) This is not realistic execution modeling, it is just a simple turnover penalty knob to show how friction can reduce compounded performance. Real backtesting should model trade based costs, spreads, funding, and slippage. Benchmark and buy and hold comparison The script pulls a benchmark symbol via request.security and builds a buy and hold equity curve starting from the same date and initial capital. The buy and hold curve is based on benchmark price appreciation, not the strategy’s asset price, so you can compare: Strategy equity on the chart symbol. Buy and hold equity for the selected benchmark instrument. By default the benchmark is TVC:SPX, but you can set it to anything, for crypto you might set it to BTC, or a sector index, or a dominance proxy depending on your study. What it plots If enabled, the indicator plots: Strategy Equity as a line, colored by recent direction of equity change, using Positive Equity Color and Negative Equity Color . Buy and Hold Equity for the chosen benchmark as a line. Optional labels that tag each curve on the right side of the chart. This makes it easy to visually see when volatility targeting and regime gating change the shape of the equity curve relative to a simple passive hold. Metrics table explained If Show Metrics Table is enabled, a table is built and populated with common performance statistics based on the simulated daily returns of the strategy equity curve after the start date. These include: Net Profit (%) total return relative to initial capital. Max DD (%) maximum drawdown computed from equity peaks, stored over time. Win Rate percent of positive return bars. Annual Mean Returns (% p/y) mean daily return annualized. Annual Stdev Returns (% p/y) volatility of daily returns annualized. Variance of annualized returns. Sortino Ratio annualized return divided by downside deviation, using negative return stdev. Sharpe Ratio risk adjusted return using the risk free rate input. Omega Ratio positive return sum divided by negative return sum. Gain to Pain total return sum divided by absolute loss sum. CAGR (% p/y) compounded annual growth rate based on time since start date. Portfolio Alpha (% p/y) alpha versus benchmark using beta and the benchmark mean. Portfolio Beta covariance of strategy returns with benchmark returns divided by benchmark variance. Skewness of Returns actually the script computes a conditional value based on the lower 5 percent tail of returns, so it behaves more like a simple CVaR style tail loss estimate than classic skewness. Important note, these are calculated from the synthetic equity stream in an indicator context. They are useful for concept exploration, but they are not a substitute for professional backtesting where trade timing, fills, funding, and leverage constraints are accurately represented. How to interpret the system conceptually Vol targeting effect When volatility rises, volMult falls, so the strategy de risks and the equity curve typically becomes smoother. When volatility compresses, volMult rises, so the system takes more exposure and tries to maintain a stable risk budget. This is why volatility targeting is often used as a “risk equalizer”, it can reduce the “biggest drawdowns happen only because vol expanded” problem, at the cost of potentially under participating in explosive upside if volatility rises during a trend. Long short directional effect Because direction is an EMA cross: In strong trends, the direction stays stable and the scaled return stream compounds in that trend direction. In choppy ranges, the EMA cross can flip and create whipsaws, which is where fees and regime filtering matter most. Regime filter effect The 50 and 200 style filter tries to: Keep the system active in sustained up regimes. Reduce exposure during long down regimes or extended weakness. It will always be late at turning points, by design. It is a slow filter meant to reduce deep participation, not to catch bottoms. Common applications This script is mainly for understanding and research, but conceptually, volatility targeting overlays are used for: Risk budgeting normalize risk so your exposure is not accidentally huge in high vol regimes. System comparison see how a simple trend model behaves with and without vol scaling. Parameter exploration test how target volatility, lookback length, and regime lengths change the shape of equity and drawdowns. Framework building as a reference blueprint before implementing a proper strategy() version with trade based execution logic. Tuning guidance Lookback lower values react faster to vol shifts but can create unstable scaling, higher values smooth scaling but react slower to regime changes. Target volatility higher targets increase exposure and drawdown potential, lower targets reduce exposure and usually lower drawdowns, but can under perform in strong trends. Signal EMAs tighter EMAs increase trade frequency, wider EMAs reduce churn but react slower. Regime EMAs slower regime filters reduce false toggles but will miss early trend transitions. Fees if you crank this up you will see how sensitive higher turnover parameter sets are to friction. Final note This is a compact educational demonstration of a volatility targeted, long short single asset framework with a regime gate and a synthetic equity curve. If you want a production ready implementation, the correct next step is to convert this concept into a strategy() script, add realistic execution and cost modeling, test across multiple timeframes and market regimes, and validate out of sample before making any decision based on the results.
Wskaźnik Pine Script®
od BackQuant
2
BTC DCA Risk Metric StrategyBTC DCA Risk Strategy - Automated Dollar Cost Averaging with 3Commas Integration Overview This strategy combines the proven Oakley Wood Risk Metric with an intelligent tiered Dollar Cost Averaging (DCA) system, designed to help traders systematically accumulate Bitcoin during periods of low risk and take profits during high-risk conditions. Key Features 📊 Multi-Component Risk Assessment 4-Year SMA Deviation: Measures Bitcoin's distance from its long-term mean 20-Week MA Analysis: Tracks medium-term momentum shifts 50-Day/50-Week MA Ratio: Captures short-to-medium term trend strength All metrics are normalized by time to account for Bitcoin's maturing market dynamics 💰 3-Tier DCA Buy System Level 1 (Low Risk): Conservative entry with base allocation Level 2 (Lower Risk): Increased allocation as opportunity improves Level 3 (Extreme Low Risk): Maximum allocation during rare buying opportunities Buys execute every bar while risk remains below thresholds, enabling true DCA accumulation 📈 Progressive Profit Taking Sell Level 1: Take initial profits as risk increases Sell Level 2: Scale out further positions during elevated risk Sell Level 3: Final exit during extreme market conditions Sell levels automatically reset when new buy signals occur, allowing flexible re-entry 🤖 3Commas Integration Fully automated webhook alerts for Custom Signal Bots JSON payloads formatted per 3Commas API specifications Supports multiple exchanges (Binance, Coinbase, Kraken, Gemini, Bybit) Configurable quote currency (USD, USDT, BUSD) How It Works The strategy calculates a composite risk metric (0-1 scale): 0.0-0.2: Extreme buying opportunity (green zone) 0.2-0.5: Favorable accumulation range (yellow zone) 0.5-0.8: Neutral to cautious territory (orange zone) 0.8-1.0+: High risk, profit-taking zone (red zone) Buy Logic: As risk decreases, position sizes increase automatically. If risk drops from L1 to L3 threshold, the strategy combines all three tier allocations for maximum exposure. Sell Logic: Sequential profit-taking ensures you capture gains progressively. The system won't advance to Sell L2 until L1 completes, preventing premature full exits. Configuration Risk Metric Parameters: All calculations use Bitcoin price data (any BTC chart works) Time-normalized formulas adapt to market maturity No manual parameter tuning required Buy Settings: Set risk thresholds for each tier (default: 0.20, 0.10, 0.00) Define dollar amounts per tier (default: $10, $15, $20) Fully customizable to your risk tolerance and capital Sell Settings: Configure risk thresholds for profit-taking (default: 1.00, 1.50, 2.00) Set percentage of position to sell at each level (default: 25%, 35%, 40%) 3Commas Setup: Create a Custom Signal Bot in 3Commas Copy Bot UUID and Secret Token into strategy inputs Enable 3Commas Alerts checkbox Create TradingView alert: Condition → "alert() function calls only", Webhook → api.3commas.io Backtesting Results Strengths: Systematically buys dips without emotion Averages down during extended bear markets Captures explosive bull run profits through tiered exits Pyramiding (1000 max orders) allows true DCA behavior Considerations: Requires sufficient capital for multiple buys during prolonged downtrends Backtest on Daily timeframe for most reliable signals Past performance does not guarantee future results Visual Design The indicator pane displays: Color-coded risk metric line: Changes from white→red→orange→yellow→green as risk decreases Background zones: Green (buy), yellow (hold), red (sell) areas Dashed threshold lines: Clear visual markers for each buy/sell level Entry/Exit labels: Green buy labels and orange/red sell labels mark all trades Credits Original Risk Metric: Oakley Wood Strategy Development & 3Commas Integration: Claude AI (Anthropic) Modifications: pommesUNDwurst Disclaimer This strategy is for educational and informational purposes only. Cryptocurrency trading carries substantial risk of loss. Always conduct your own research and never invest more than you can afford to lose. The authors are not financial advisors and assume no responsibility for trading decisions made using this tool.
Strategia Pine Script®
od nakphanan
Alphabet Long Trigger (Björn)Alphabet Trigger Dezember 2025: Kurs 267–269 € grüne Kerze mit höherem Tief Volumen-Lebenszeichen Nasdaq nicht im Abwärtsmodus Alphabet Momentum Pullback Strategy — Brief Description This strategy targets high-quality pullbacks within a confirmed uptrend and enters a long position only when price, structure, volume, and market context align. A trade is triggered when: Price enters the buy zone between €267–€269, signaling a controlled pullback. The chart forms the first green candle with a higher low, indicating buyers are returning. Volume shows a positive uptick (at least above the recent average), confirming real demand. The Nasdaq is not falling, ensuring the broader tech market is stable and not in risk-off mode. The strategy avoids entries triggered solely by price and waits for multi-factor confirmation, reducing false breakouts and momentum traps. It is designed for disciplined swing traders who prioritize trend alignment, volume confirmation, and market context before entering a position.
Wskaźnik Pine Script®
od bjoern_brocher
US Market Long Horizon Momentum Summary in one paragraph US Market Long Horizon Momentum is a trend following strategy for US index ETFs and futures built around a single eighteen month time series momentum measure. It helps you stay long during persistent bull regimes and step aside or flip short when long term momentum turns negative. Scope and intent • Markets. Large cap US equity indices, liquid US index ETFs, index futures • Timeframes. 4h/ Daily charts • Default demo used in the publication. SPY on 4h timeframe chart • Purpose. Provide a minimal long bias index timing model that can reduce deep drawdowns and capture major cycles without parameter mining • Limits. This is a strategy. Orders are simulated on standard candles only Originality and usefulness • Unique concept or fusion. One unscaled multiple month log return of an external benchmark symbol drives all entries and exits, with optional volatility targeting as a single risk control switch. • Failure mode addressed. Fully passive buy and hold ignores the sign of long horizon momentum and can sit through multi year drawdowns. This script offers a way to step down risk in prolonged negative momentum without chasing short term noise. • Testability. All parameters are visible in Inputs and the momentum series is plotted so users can verify every regime change in the Tester and on price history. • Portable yardstick. The log return over a fixed window is a unit that can be applied to any liquid symbol with daily data. Method overview in plain language The method looks at how far the benchmark symbol has moved in log return terms over an eighteen month window in our example. If that long horizon return is positive the strategy allows a long stance on the traded symbol. If it is negative and shorts are enabled the strategy can flip short, otherwise it goes flat. There is an optional realised volatility estimate on the traded symbol that can scale position size toward a target annual volatility, but in the default configuration the model uses unit leverage and only the sign of momentum matters. Base measures Return basis. The core yardstick is the natural log of close divided by the close eighteen months ago on the benchmark symbol. Daily log returns of the traded symbol feed the realised volatility estimate when volatility targeting is enabled. Components • Component one Momentum eighteen months. Log of benchmark close divided by its close mom_lookback bars ago. Its sign defines the trend regime. No extra smoothing is applied beyond the long window itself. • Component two Realised volatility optional. Standard deviation of daily log returns on the traded symbol over sixty three days. Annualised by the square root of 252. Used only when volatility targeting is enabled. • Optional component Volatility targeting. Converts target annual volatility and realised volatility into a leverage factor clipped by a maximum leverage setting. Fusion rule The model uses a simple gate. First compute the sign of eighteen month log momentum on the benchmark symbol. Optionally compute leverage from volatility. The sign decides whether the strategy wants to be long, short, or flat. Leverage only rescales position size when enabled and does not change direction. Signal rule • Long suggestion. When eighteen month log momentum on the benchmark symbol is greater than zero, the strategy wants to be long. • Short suggestion. When that log momentum is less than zero and shorts are allowed, the strategy wants to be short. If shorts are disabled it stays flat instead. • Wait state. When the log momentum is exactly zero or history is not long enough the strategy stays flat. • In position. In practice the strategy sits IN LONG while the sign stays positive and flips to IN SHORT or flat only when the sign changes. Inputs with guidance Setup • Momentum Lookback (months). Controls the horizon of the log return on the benchmark symbol. Typical range 6 to 24 months. Raising it makes the model slower and more selective. Lowering it makes it more reactive and sensitive to medium term noise. • Symbol. External symbol used for the momentum calculation, SPY by default. Changing it lets you time other indices or run signals from a benchmark while trading a correlated instrument. Logic • Allow Shorts. When true the strategy will open short positions during negative momentum regimes. When false it will stay flat whenever momentum is negative. Practical setting is tied to whether you use a margin account or an ETF that supports shorting. Internal risk parameters (not exposed as inputs in this version) are: • Target Vol (annual). Target annual volatility for volatility targeting, default 0.2. • Vol Lookback (days). Window for realised volatility, default 63 trading days. • Max Leverage. Cap on leverage when volatility targeting is enabled, default 2. Usage recipes Swing continuation • Signal timeframe. Use the daily chart. • Benchmark symbol. Leave at SPY for US equity index exposure. • Momentum lookback. Eighteen months as a default, with twelve months as an alternative preset for a faster swing bias. Properties visible in this publication • Initial capital. 100000 • Base currency. USD • Default order size method. 5% of the total capital in this example • Pyramiding. 0 • Commission. 0.03 percent • Slippage. 3 ticks • Process orders on close. On • Bar magnifier. Off • Recalculate after order is filled. Off • Calc on every tick. Off • All request.security calls use lookahead = barmerge.lookahead_off Realism and responsible publication The strategy is for education and research only. It does not claim any guaranteed edge or future performance. All results in Strategy Tester are hypothetical and depend on the data vendor, costs, and slippage assumptions. Intrabar motion is not modeled inside daily bars so extreme moves and gaps can lead to fills that differ from live trading. The logic is built for standard candles and should not be used on synthetic chart types for execution decisions. Performance is sensitive to regime structure in the US equity market, which may change over time. The strategy does not protect against single day crash risk inside bars and does not model gap risk explicitly. Past behavior of SPY and the momentum effect does not guarantee future persistence. Honest limitations and failure modes • Long sideways regimes with small net change over eighteen months can lead to whipsaw around the zero line. • Very sharp V shaped reversals after deep declines will often be missed because the model waits for momentum to turn positive again. • The sample size in a full SPY history is small because regime changes are infrequent, so any test must be interpreted as indicative rather than statistically precise. • The model is highly dependent on the chosen lookback. Users should test nearby values and validate that behavior is qualitatively stable. Legal Education and research only. Not investment advice. You are responsible for your own decisions. Always test on historical data and in simulation with realistic costs before any live use.
Strategia Pine Script®
od exlux
Strategy: HMA 50 + Supertrend SniperHMA 50 + Supertrend Confluence Strategy (Trend Following with Noise Filtering) Description: Introduction and Concept This strategy is designed to solve a common problem in trend-following trading: Lag vs. False Signals. Standard Moving Averages often lag too much, while price action indicators can generate false signals during choppy markets. This script combines the speed of the Hull Moving Average (HMA) with the volatility-based filtering of the Supertrend indicator to create a robust "Confluence System." The primary goal of this script is not just to overlay two indicators, but to enforce a strict rule where a trade is only taken when Momentum (HMA) and Volatility Direction (Supertrend) are in perfect agreement. Why this combination? (The Logic Behind the Mashup) Hull Moving Average (HMA 50): We use the HMA because it significantly reduces lag compared to SMA or EMA by using weighted calculations. It acts as our primary Trend Direction detector. However, HMA can be too sensitive and "whipsaw" during sideways markets. Supertrend (ATR-based): We use the Supertrend (Factor 3.0, Period 10) as our Volatility Filter. It uses Average True Range (ATR) to determine the significant trend boundary. How it Works (Methodology) The strategy uses a boolean logic system to filter out low-quality trades: Bullish Confluence: The HMA must be rising (Slope > 0) AND the Close Price must be above the Supertrend line (Uptrend). Bearish Confluence: The HMA must be falling (Slope < 0) AND the Close Price must be below the Supertrend line (Downtrend). The "Choppy Zone" (Noise Filter): This is a unique feature of this script. If the HMA indicates one direction (e.g., Rising) but the Supertrend indicates the opposite (e.g., Downtrend), the market is considered "Choppy" or indecisive. In this state, the script paints the candles or HMA line Gray and exits all positions (optional setting) to preserve capital. Visual Guide & Signals To make the script easy to interpret for traders who do not read Pine Script, I have implemented specific visual cues: Green Cross (+): Indicates a LONG entry signal. Both HMA and Supertrend align bullishly. Red Cross (X): Indicates a SHORT entry signal. Both HMA and Supertrend align bearishly. Thick Line (HMA): The main line changes color based on the trend. Green: Bullish Confluence. Red: Bearish Confluence. Gray: Divergence/Choppy (No Trade Zone). Thin Step Line: This is the Supertrend line, serving as your dynamic Trailing Stop Loss. Strategy Settings HMA Length: Default is 50 (Mid-term trend). ATR Factor/Period: Default is 3.0/10 (Standard for trend catching). Exit on Choppy: A toggle switch allowing users to decide whether to hold through noise or exit immediately when indicators disagree. Risk Warning This strategy performs best in trending markets (Forex, Crypto, Indices). Like all trend-following systems, it may experience drawdown during prolonged accumulation/distribution phases. Please backtest with your specific asset before using it with real capital.
Strategia Pine Script®
od Gustav_Rex
3
OBV + WaveTrend Volume Scalper [GratefulFutures]This script is a combination script of three different strategies that provides buy and sell signals based on the change of volume with momentum confirmations. Sources used: This script relies on the outstanding scripts of the great script writer LazyBear: LazyBear The following scripts were used in this publication: 1. A modified "On-Balance Volume Oscillator" modified from LazyBear's original script: 2. Wavetrend Oscillator with crosses, Author: LazyBear 3. Squeeze Momentum Oscillator, Author: LazyBear This script functions based on the following criteria being true: 1. On balance volume oscillator turning from negative to positive (buy) or positive to negative (sell) 2. Squeeze Momentum value is increasing (buy) or decreasing (sell) 3. Wavetrend 1 (wt1) is greater than wavetrend 2 (wt2) (buy)/ Wavetrend 1 (wt1) is less than wavetrend 2 (wt2) (sell) By combining these factors the indicator is able to signal exactly when net buying turns to net selling (OBV) and when this change is most advantageous to continue based on the momentum and price action of the underlying asset (SQMOMO and Wavetrend). This allows you to pair volume and price action for a powerful tool to identify where price will reverse or continue providing exceptional entries for short term trades, especially when combined with other aspects such as support and resistance, or volume profile. How to use: Simply adjust the settings to your preference and read the given signals as generated. Settings There are multiple ways to tune the signals generated. It is set standard for my preferred use on a 1 minute chart. OBV Oscillator Settings The first 4 dropdowns in the Inputs section tune the On Balance Volume Oscillator (OBVO) portion of the indicator. You can choose if you want it to calculate based on close, open, high, low, or other value. The most impactful in the entire settings is going to be the length and smoothing of the OBVO EMA. Making this number lower increasing the sensitivity to changes in volume, making the signals come quicker but is more susceptible to quick fluctuations. A value of between (5-20) is reasonable for the OBVO EMA length. There is a separate smoothing factor titled OBV Smoothing Length and below that, OBV Smoothing Type , a value of (2) is standard with "SMA" for smoothing type with a value of between 2-10 being reasonable. You may also play with these values to see what you like for your trading style. Wavetrend Settings The next 3 options are to modify the wavetrend portion of the indicator. I do not modify these from standard, and feel that they work appropriately on all time frames at the following values: n1 length (10), n2 length (20), Wavetrend Signal SMA length (4) Squeeze Momentum Settings The following 5 options through the end modify the Squeeze momentum portion of the indicator. The only one that modifies the signals generated is the KC Length , Making this number lower increasing the sensitivity to changes in price action, making the signals come quicker but is more susceptible to quick fluctuations. A value of between (18-25) is reasonable for KC Length . Style Setting You may select if you want to see the buy and sell signals. The following 5 options Raw OBV Osc through Squeeze Momentum allow you to see where each specific requirement was met, posted as a vertical line, but for live use it is recommended to turn all of these vertical lines off and only use the buy and sell signals. Time Frames: While this script is most effective on shorter time frames (1 minute for scalping and daytrading) it is also viable to use it on longer timeframes, due to the nature of its components being independent of time frame. Examples of use - (Green and red vertical lines are for visualization purpose and are not part of the script) SPY 1 Minute (Factory Settings): SPX 15 minutes (Factory Settings): Considerations This script is meant primarily for short term trading, trades on the basis of seconds to minutes primarily. While they can be a good indication of volume lining up with momentum, it is always wise to use them in combination with other factors such as support, resistance, market structure, volume levels, or the many other techniques out there... As Always... Happy Trading. -Not_A_Mad_Scientist (GreatfulFutures Trade University)
Wskaźnik Pine Script®
od not_a_mad_scientist
Smart Money Setup 08 [TradingFinder] Binary Options Gold Scalper🔵 Introduction In the Smart Money methodology, the market is understood as a structure driven by liquidity flow. This structure forms through the movement of large orders, the accumulation of liquidity, and the reactions that occur around key price zones. The logic of Smart Money is based on the idea that price movement is not random and usually evolves with the intention of collecting liquidity and creating price inefficiencies known as imbalances. Within this framework, several important stages including the liquidity sweep, the formation of a point of interest, the appearance of an imbalance and the transition of market structure play major roles and collectively define the broader direction of price. In many bullish scenarios, the market begins by sweeping sell side liquidity and targeting important lows in order to collect the liquidity resting below them. This liquidity collection often becomes the starting point for creating a point of interest which usually marks the area where Smart Money begins to enter the market. After price moves away from this point, it breaks a structural high and forms a change of character. This shift marks a transition in the balance of power between buyers and sellers and is considered the first clear signal that the market structure is changing. After the change of character, new institutional order flow often creates a strong and rapid movement that leaves behind an imbalance. This imbalance is one of the most important elements in Smart Money analysis because price tends to return to this area in order to complete structure and restore balance. The return into the imbalance becomes meaningful when it occurs together with the liquidity sweep, the presence of a validated point of interest and a confirmed structural transition. These conditions frequently mark the beginning of powerful movements within the Smart Money cycle. Understanding the sequence of liquidity, point of interest, imbalance, change of character and market structure builds the foundation of Smart Money analysis and provides a clear view of the true direction of institutional strength. Bullish Setup : Bearish Setup : 🔵 How to Use To use this framework effectively, the trader must analyze the market through the principles of Smart Money and observe how liquidity drives price. A trade becomes valid only when several essential components appear together in a clear and consistent order. These components include the liquidity sweep, the formation of a point of interest, the confirmation of a change of character, the transition of market structure and the return of price into an imbalance. The method is built on the understanding that the market first collects liquidity, then shifts order flow and finally provides an entry opportunity inside an inefficient area or inside a point of interest. For this reason, the trader must follow the path of liquidity from the moment the sweep occurs, through the point of interest and the change of character and finally into the return of price toward the imbalance. When applied correctly, this approach creates entries that are more precise, more structural and more aligned with the real behavior of the market rather than with superficial signals. 🟣 Long Position A bullish setup in Smart Money structure begins with a liquidity sweep on the sell side. The market first targets the areas where sell side liquidity is located and collects the stops and resting liquidity under previous lows. This collection is the condition that Smart Money requires to begin creating a new order flow. After this liquidity has been taken, a point of interest forms which is usually the last bearish candle or the effective demand zone that initiated the upward movement. Price then moves away from the point of interest and breaks a structural high which creates a change of character. This event confirms that the market structure has moved from a bearish state to a bullish one and that buying pressure has taken control of the order flow. Following this shift, a strong upward movement often occurs and creates an imbalance between candles. This imbalance reflects the entrance of strong Smart Money orders and is seen as an important confirmation of bullish strength. When price returns to this imbalance after the displacement, the market enters a phase where Smart Money aims to complete the corrective movement and continue the upward direction. The reaction inside the imbalance when combined with the liquidity sweep, the confirmed point of interest and the change of character completes the bullish setup and forms a structure that often leads to a continuation of the bullish trend. 🟣 Short Position A bearish setup follows the same Smart Money logic but in the opposite direction. The market begins by collecting buy side liquidity and targets the highs where buy side liquidity and resting stops are located. This liquidity sweep on the buy side becomes the starting phase for Smart Money to initiate a downward order flow. After the liquidity is collected, a bearish point of interest forms which is usually the last bullish candle or the supply zone that created the initial drop. Price then moves away from this point and breaks the first structural low. This creates a change of character to the downside which confirms that the market structure has transitioned from bullish to bearish and that selling pressure has gained control. After this shift, a strong downward displacement appears and leaves behind a bearish imbalance that clearly shows the dominance of sellers. As price returns to this imbalance and corrects the inefficient movement, the bearish setup becomes complete as long as the market structure remains bearish. The combination of the buy side liquidity sweep, the bearish point of interest, the change of character, the imbalance and the corrective return creates the ideal structure that Smart Money uses to continue the downward movement and develop a reliable selling opportunity. 🔵 Settings 🟣 Logic Settings Pivot Period : Defines how many bars are analyzed to identify swing highs and lows. Higher values detect larger, slower structures, while lower values respond to faster patterns. The default value of 5 offers a balanced sensitivity. 🟣 Alert Settings Alert : Enables alerts for SMS08. Message Frequency : Determines the frequency of alerts. Options include 'All' (every function call), 'Once Per Bar' (first call within the bar), and 'Once Per Bar Close' (final script execution of the real-time bar). Default is 'Once per Bar'. Show Alert Time by Time Zone : Configures the time zone for alert messages. Default is 'UTC'. 🔵 Conclusion The Smart Money approach demonstrates that price movement is not random or based on surface level patterns. Instead, it develops through a clear cycle of liquidity collection, structural transition and corrective movement toward key price zones. By recognizing events such as the liquidity sweep, the formation of the point of interest, the change of character and the return into the imbalance, the trader gains the ability to understand order flow more accurately and identify the true direction of market structure. Both bullish and bearish setups show that the alignment of these elements creates a transparent view of institutional behavior and reveals the source of strong movements in the market. When the trader correctly identifies this sequence, entry points become more reliable and more aligned with liquidity flow. The combination of liquidity, structure and imbalance provides a consistent framework that removes guesswork and guides decisions through the real logic of the market.
Wskaźnik Pine Script®
od TFlab
5
Trendshift [CHE] StrategyTrendshift Strategy — First-Shift Structural Regime Trading Profitfactor 2,603 Summary Trendshift Strategy implements a structural regime-shift trading model built around the earliest confirmed change in directional structure. It identifies major swing highs and lows, validates breakouts through optional ATR-based conviction, and reacts only to the first confirmed shift in each direction. After a regime reversal, the strategy constructs a premium and discount band between the breakout candle and the previous opposite swing. This band is used as contextual bias and may optionally inform stop placement and position sizing. The strategy focuses on clear, interpretable structural events rather than continuous signal generation. By limiting entries to the first valid shift, it reduces false recycles and allows the structural state to stabilize before a new trade occurs. All signals operate on closed-bar logic, and the strategy avoids higher-timeframe calls to stabilize execution behavior. Motivation: Why this design? Many structure-based systems repeatedly trigger as price fluctuates around prior highs and lows. This often leads to multiple flips during volatile or choppy conditions. Trendshift Strategy addresses this problem by restricting execution to the first confirmed structural event in each direction. ATR-based filters help differentiate genuine structural breaks from noise, while the contextual band ensures that the breakout is meaningful in relation to recent volatility. The design aims to represent a minimalistic structural trading framework focused on regime turns rather than continuous trend signaling. This reduces chart noise and clarifies where the market transitions from one regime to another. What’s different vs. standard approaches? Baseline reference Typical swing-based structure indicators report every break above or below recent swing points. Architecture differences First-shift-only regime logic that blocks repeated signals until direction reverses ATR-filtered validation to avoid weak or momentum-less breaks Premium and discount bands derived from breakout structure Optional band-driven stop placement Optional band-dependent position-sizing factor Regime timeout system to neutralize structure after extended inactivity Persistent-state architecture to prevent re-triggering Practical effect Only the earliest actionable structure change is traded Fewer but higher-quality signals Premium/discount tint assists contextual evaluation Stops and sizing can be aligned with structural context rather than arbitrary volatility measures Improved chart interpretability due to reduced marker frequency How it works (technical) The algorithm evaluates symmetric swing points using a fixed bar window. When a swing forms, its value and bar index are stored as persistent state. A structural shift occurs when price closes beyond the most recent major swing on the opposite side. If ATR filtering is enabled, the breakout must exceed a volatility-scaled distance to prevent micro-breaks from firing. Once a valid shift is confirmed, the regime is updated to bullish or bearish. The script records the breakout level, the opposite swing, and derives a band between them. This band is checked for minimum size relative to ATR to avoid unrealistic contexts. The first shift in a new direction generates both the strategy entry and a visual marker. Additional shifts in the same direction are suppressed until a reversal occurs. If a timeout is enabled, the regime resets after a specified number of bars without structural change, optionally clearing the band. Stop placement, if enabled, uses either the opposite or same band edge depending on configuration. Position size is computed from account percentage and may optionally scale with the price-span-to-ATR relationship. Parameter Guide Market Structure Swing length (default 5): Controls swing sensitivity. Lower values increase responsiveness. Use ATR filter (default true): Requires breakouts to show momentum relative to ATR. Reduces false shifts. ATR length (default 14): Volatility estimation for breakout and band validation. Break ATR multiplier (default 1.0): Required breakout strength relative to ATR. Premium/Discount Framework Enable framework (default true): Activates premium/discount evaluation. Persist band on timeout (default true): Keeps structural band after timeout. Min band ATR mult (default 0.5): Rejects narrow bands. Regime timeout bars (default 500): Neutralizes regime after inactivity. Invert colors (default false): Color scheme toggle. Visuals Show zone tint (default true): Background shade in premium or discount region. Show shift markers (default true): Display first-shift markers. Execution and Risk Risk per trade percent (default 1.0): Determines position size as account percentage. Use band for size (default false): Scales size relative to band width behavior. Flat on opposite shift (default true): Forces reversal behavior. Use stop at band (default false): Stop anchored to band edges. Stop band side: Chooses which band edge is used for stop generation. Reading & Interpretation A green background indicates discount conditions within the structural band; red indicates premium conditions. A green triangle below price marks the first bullish structural shift after a bearish regime. A red triangle above price marks the first bearish structural shift after a bullish regime. When stops are active, the opposite band edge typically defines the protective level. Band width relative to ATR indicates how significant a structural change is: wider bands imply stronger volatility structure, while narrow bands may be suppressed by the minimum-size filter. Practical Workflows & Combinations Trend following: Use first-shift entries as initial regime confirmation. Add higher-timeframe trend filters for additional context. Swing trading: Combine with simple liquidity or fair-value-gap concepts to refine entries. Bias mapping: Use higher timeframes for structural regime and lower timeframes for execution within the premium/discount context. Exit management: When using stops, consider ATR-scaling or multi-stage profit targets. When not using stops, reversals become the primary exit. Behavior, Constraints & Performance The strategy uses only confirmed swings and closed-bar logic, avoiding intrabar repaint. Pivot-based swings inherently appear after the pivot window completes, which is standard behavior. No higher-timeframe calls are used, preventing HTF-related repaint issues. Persistent variables track regime and structural levels, minimizing recomputation. The maximum bars back setting is five-thousand. The design avoids loops and arrays, keeping performance stable. Known limitations include limited signal density during consolidations, delayed swing confirmation, and sensitivity to extreme gaps that stretch band logic. ATR filtering mitigates some of these effects but does not eliminate them entirely. Sensible Defaults & Quick Tuning Fewer but stronger entries: Increase swing length or ATR breakout multiplier. More responsive entries: Reduce swing length to capture earlier shifts. More active band behavior: Lower the minimum band ATR threshold. Stricter stop logic: Use the opposite band edge for stop placement. Volatile markets: Increase ATR length slightly to stabilize behavior. What this indicator is—and isn’t Trendshift Strategy is a structural-regime trading engine that evaluates major directional shifts. It is not a complete trading system and does not include take-profit logic or prediction features. It does not attempt to forecast future price movement and should be used alongside broader market structure, volatility context, and disciplined risk management. Disclaimer The content provided, including all code and materials, is strictly for educational and informational purposes only. It is not intended as, and should not be interpreted as, financial advice, a recommendation to buy or sell any financial instrument, or an offer of any financial product or service. All strategies, tools, and examples discussed are provided for illustrative purposes to demonstrate coding techniques and the functionality of Pine Script within a trading context. Any results from strategies or tools provided are hypothetical, and past performance is not indicative of future results. Trading and investing involve high risk, including the potential loss of principal, and may not be suitable for all individuals. Before making any trading decisions, please consult with a qualified financial professional to understand the risks involved. By using this script, you acknowledge and agree that any trading decisions are made solely at your discretion and risk. Do not use this indicator on Heikin-Ashi, Renko, Kagi, Point-and-Figure, or Range charts, as these chart types can produce unrealistic results for signal markers and alerts. Best regards and happy trading Chervolino
Strategia Pine Script®
od chervolino
APEX TREND: Macro & Hard Stop SystemAPEX TREND: Macro & Hard Stop System The APEX TREND System is a composite trend-following strategy engineered to solve the "Whipsaw" problem inherent in standard breakout systems. It orchestrates four distinct technical theories—Macro Trend Filtering, Volatility Squeeze, Momentum, and Volatility Stop-Loss—into a single, hierarchical decision-making engine. This script is not merely a collection of indicators; it is a rules-based trading system designed for Swing Traders (Day/Week timeframes) who aim to capture major trend extensions while strictly managing downside risk through a "Hard Stop" mechanism. 🧠 Underlying Concepts & Originality Many trend indicators fail because they treat all price movements equally. The APEX TREND differentiates itself by applying an "Institutional Filter" logic derived from classic Dow Theory and Modern Volatility Analysis. 1. The Macro Hard Stop (The 200 EMA Logic) Origin: Based on the institutional mandate that “Nothing good happens below the 200-day moving average.” Function: Unlike standard super trends that flip constantly in sideways markets, this system integrates a 200-period Exponential Moving Average (EMA) as a non-negotiable "Hard Stop." Synergy: This acts as the primary gatekeeper. Even if the volatility engine signals a "Buy," the system suppresses the signal if the price is below the Macro Baseline, effectively filtering out counter-trend traps. 2. The Volatility Engine (Squeeze Theory) Origin: Derived from John Carter’s TTM Squeeze concept. Function: The script identifies periods where Bollinger Bands (Standard Deviation) contract inside Keltner Channels (ATR). This indicates a period of potential energy build-up. Synergy: The system only triggers an entry when this energy is released (Breakout) AND coincides with Linear Regression Momentum, ensuring the breakout is genuine. 3. Anti-Chop Filter (ADX Integration) Origin: J. Welles Wilder’s Directional Movement Theory. Function: A common failure point for trend systems is low-volatility chop. This script utilizes the Average Directional Index (ADX). Synergy: If the ADX is below the threshold (Default: 20), the market is deemed "Choppy." The script visually represents this by painting candles GRAY, signaling a "No-Trade Zone" regardless of price action. 4. The "Run Trend" Stop Loss (Factor 4.0 ATR) Origin: Adapted from the Turtle Trading rules regarding volatility-based stops. Function: Standard Trailing Stops (usually Factor 3.0) are too tight for crypto or volatile equities on daily timeframes. Optimization: This system employs a wider ATR Multiplier of 4.0. This allows the asset to fluctuate naturally within a trend without triggering a premature exit, maximizing the "Run Trend" potential. 🛠 How It Works (The Algorithm) The script processes data in a specific order to generate a signal: Check Macro Trend: Is Price > EMA 200? (If No, Longs are disabled). Check Volatility: Is ADX > 20? (If No, all signals are disabled). Check Volume: Is Current Volume > 1.2x Average Volume? (Confirmation of institutional participation). Trigger: Has a Volatility Breakout occurred in the direction of the Macro Trend? Execution: If ALL above are true -> Generate Signal. 🎯 Strategy Guide 1. Long Setup (Bullish) Signal: Look for the Green "APEX LONG" Label. Condition: The price must be ABOVE the White Line (EMA 200). Execution: Enter at the close of the signal candle. Stop Loss: Initial stop at the Green Trailing Line. 2. Short Setup (Bearish) Signal: Look for the Red "APEX SHORT" Label. Condition: The price must be BELOW the White Line (EMA 200). Execution: Enter at the close of the signal candle. Stop Loss: Initial stop at the Red Trailing Line. 3. Exit Rules (Crucial) This system employs a Dual-Exit Mechanism: Soft Exit (Profit Taking): Close the position if the price crosses the Trailing Stop Line (Green/Red line). This locks in profits during a trend reversal. Hard Exit (Emergency): Close the position IMMEDIATELY if the price crosses the White EMA 200 Line against your trade. This prevents holding a position during a major market regime change. ⚙️ Settings Momentum Engine: Adjust Bollinger Band/Keltner Channel lengths to tune breakout sensitivity. Apex Filters: Toggle the EMA 200 or ADX filters on/off to adapt to different asset classes. Risk Management: The ATR Multiplier (Default 4.0) controls the width of the trailing stop. Lower values = Tighter stops (Scalping); Higher values = Looser stops (Swing). Disclaimer: This script is designed for trend-following on higher timeframes (4H, 1D, 1W). Please backtest on your specific asset before live trading.
Wskaźnik Pine Script®
od Gustav_Rex
RSI Strategy [PrimeAutomation]⯁ OVERVIEW The RSI Strategy is a momentum-driven trading system built around the behavior of the Relative Strength Index (RSI). Instead of using traditional overbought/oversold zones, this strategy focuses on RSI breakouts with volatility-based trailing stops, adaptive profit-targets, and optional early-exit logic. It is designed to capture strong continuation moves after momentum shifts while protecting trades using ATR-based dynamic risk management. ⯁ CONCEPTS RSI Breakout Momentum: Entries happen when RSI breaks above/below custom thresholds, signaling a shift in momentum rather than mean reversion. Volatility-Adjusted Risk: ATR defines both stop-loss and profit-target distances, scaling positions based on market volatility. Dynamic Trailing Stop: The strategy maintains an adaptive trailing level that tightens as price moves in the trade’s favor. Single-Position System: Only one trade at a time (no pyramiding), maximizing clarity and simplifying execution. ⯁ KEY FEATURES RSI Signal Engine • Long when RSI crosses above Upper threshold • Short when RSI crosses below Lower threshold These levels are configurable and optimized for trend-momentum detection. ATR-Based Stop-Loss A custom ATR multiplier defines the initial stop. • Long stop = price – ATR × multiplier • Short stop = price + ATR × multiplier Stops adjust continuously using a trailing model. ATR-Based Take Profit (Optional) Profit targets scale with volatility. • Long TP = entry + ATR × TP-multiplier • Short TP = entry – ATR × TP-multiplier Users can disable TP and rely solely on trailing stops. Real-Time Trailing Logic The stop updates bar-by-bar: • In a long trade → stop moves upward only • In a short trade → stop moves downward only This keeps the stop tight as trends develop. Early Exit Module (Optional) After X bars in a trade, opposite RSI signals trigger exit. This reduces holding time during weak follow-through phases. Full Visual Layer • RSI plotted with threshold fills • Entry/TP/Stop visual lines • Color-coded zones for clarity ⯁ HOW TO USE Look for RSI Breakouts: Focus on RSI crossing above the upper boundary (long) or below the lower boundary (short). These moments identify fresh momentum surges. Use ATR Levels to Manage Risk: Because stops and targets scale with volatility, the strategy adapts well to both quiet and explosive market phases. Monitor Trailing Stops for Trend Continuation: The trailing stop is the primary driver of exits—often outperforming fixed targets by catching larger runs. Use on Liquid Markets & Mid-Higher Timeframes: The system performs best where RSI and ATR signals are clean—crypto majors, FX, and indices. ⯁ CONCLUSION The RSI Strategy is a modern RSI breakout system enhanced with volatility-adaptive risk management and flexible exit logic. It is designed for traders who prefer momentum confirmation over mean reversion, offering a disciplined framework with robust protections and dynamic trend-following capability. Its blend of ATR-based stops, optional profit targets, and RSI-driven entries makes it a reliable strategy across a wide range of market conditions.
Strategia Pine Script®
od ChartPrime
5
Hash Supertrend [Hash Capital Research]Hash Supertrend Strategy by Hash Capital Research Overview Hash Supertrend is a professional-grade trend-following strategy that combines the proven Supertrend indicator with institutional visual design and flexible time filtering. The strategy uses ATR-based volatility bands to identify trend direction and executes position reversals when the trend flips.This implementation features a distinctive fluorescent color system with customizable glow effects, making trend changes immediately visible while maintaining the clean, professional aesthetic expected in quantitative trading environments. Entry Signals: Long Entry: Price crosses above the Supertrend line (trend flips bullish) Short Entry: Price crosses below the Supertrend line (trend flips bearish) Controls the lookback period for volatility calculation Lower values (7-10): More sensitive to price changes, generates more signals Higher values (12-14): Smoother response, fewer signals but potentially delayed entries Recommended range: 7-14 depending on market volatility Factor (Default: 3.0) Restricts trading to specific hours Useful for avoiding low-liquidity sessions, overnight gaps, or known choppy periods When disabled, strategy trades 24/7 Start Hour (Default: 9) & Start Minute (Default: 30) Define when the trading session begins Uses exchange timezone in 24-hour format Example: 9:30 = 9:30 AM End Hour (Default: 16) & End Minute (Default: 0) Controls the vibrancy of the fluorescent color system 1-3: Subtle, muted colors 4-6: Balanced, moderate saturation 7-10: Bright, highly saturated fluorescent appearance Affects both the Supertrend line and trend zones Glow Effect (Default: On) Adds luminous halo around the Supertrend line Creates a multi-layered visual with depth Particularly effective during strong trends Glow Intensity (Default: 5.0) Displays tiny fluorescent dots at entry points Green dot below bar: Long entry Red dot above bar: Short entry Provides clear visual confirmation of executed trades Show Trend Zone (Default: On) Strong trending markets (2020-style bull runs, sustained bear markets) Markets with clear directional bias Instruments with consistent volatility patterns Timeframes: 15m to Daily (optimal on 1H-4H) Challenging Conditions: Choppy, range-bound markets Low volatility consolidation periods Highly news-driven instruments with frequent gaps Very low timeframes (1m-5m) prone to noise Recommended AssetsCryptocurrency:
Strategia Pine Script®
od Hash_Capital
ParabolicSAR+EMA[TS_Indie]🚀 EMA + Parabolic SAR Reversal Trading Strategy This trading system effectively combines the use of Exponential Moving Averages (EMA) with the Parabolic SAR to identify both price trends and key reversal points. The EMA Fast is used to signal the primary short-term trend, while the EMA Slow acts as a filter for the long-term trend direction. The Parabolic SAR then helps to confirm the reversal signals. 🛠️ Tools Used 1. EMA Fast – Primary Short-Term Trend 2. EMA Slow – Long-Term Trend Filter 3. Parabolic SAR – Reversal Confirmation 🎯 Entry Rules 📈 Buy Setup 1. Trend Filter: EMA Fast > EMA Slow → Uptrend 2. Pullback: Price pulls back and closes below the EMA Fast line. 3. Reversal: Price reverses/pulls back up and closes above the EMA Fast line. 4. SAR Confirmation: The previous Parabolic SAR dot is above the high, and the dot in the current candle is below the low → Reversal signal confirmed. 5. Entry: Enter Buy immediately. 📉 Sell Setup 1. Trend Filter: EMA Fast < EMA Slow → Downtrend 2. Pullback: Price pulls back and closes above the EMA Fast line. 3. Reversal: Price reverses/pulls back down and closes below the EMA Fast line. 4. SAR Confirmation: The previous Parabolic SAR dot is below the low, and the dot in the current candle is above the high → Reversal signal confirmed. 5. Entry: Enter Sell immediately. 💰 Exit Management (Entry, Stop Loss, Take Profit) 1. Entry: Enter the order at the closing price of the signal candle. 2. Stop Loss (SL): Set the Stop Loss at the Parabolic SAR dot. 3. Take Profit (TP): Calculated from the Entry and Stop Loss points, multiplied by the Risk Reward Ratio. ⚙️ Optional Parameters ➭ Custom Risk/Reward Ratio for Take Profit. ➭ Option to add an ATR buffer to the Stop Loss. ➭ Adjustable EMA Fast period. ➭ Adjustable EMA Slow period. ➭ Adjustable Parabolic SAR parameters. ➭ Option to enable Long-only / Short-only positions. ➭ Customizable Backtest start and end date. ➭ Customizable trading session time. 🔔 Alert Function Alerts display: ➭ Entry Price ➭ Stop Loss Price ➭ Take Profit Price 💡 This strategy allows for many parameter adjustments, such as the MA type, adding/subtracting from the Stop Loss using ATR, and selecting specific sessions for backtesting. If you find interesting or profitable results after adjusting the parameters, please share your comments with other traders! ⚠️ Disclaimer This indicator is designed for educational and research purposes only. It does not guarantee profits and should not be considered financial advice. Trading in financial markets involves significant risk , including the potential loss of capital.
Strategia Pine Script®
od Truth_Strategy_Indie