Rozpocznij

Punkty Pivota

Adaptive Risk Management [sgbpulse]1. Introduction: Adaptive Risk Management is an advanced indicator designed to provide traders with a comprehensive risk management tool directly on the chart. Instead of relying on complex manual calculations, the indicator automates all critical steps of trade planning. It dynamically calculates the estimated Entry Price , the Stop Loss location, the required Position Size (Quantity) based on your capital and risk limits, and the three Take Profit targets based on your defined Reward/Risk ratios. The indicator displays all these essential data points clearly and visually on the chart, ensuring you always know the potential risk-reward profile of every trade. ARM : The A daptive R isk M anagement every trader needs to ARM themselves with. 2. The Critical Importance of Risk Management Proper risk management is the cornerstone of successful trading. Consistent profitability in the market is impossible without rigorously defining risk limits. Risk Control: This starts by setting the maximum risk amount you are willing to lose in a single trade (Risk per Trade), and limiting the total capital allocated to the position (Max Capital per Trade). Defining Boundaries (Stop Loss & Take Profit): It is mandatory to define a technical Stop Loss and a Take Profit target. A fundamental rule of risk management is that the Reward/Risk Ratio (R/R) must be a minimum of 1:1. 3. Core Features, Adaptivity, and Customization The Adaptive Risk Management indicator is engineered for use across all major trading styles, including Swing Trading, Intraday Trading, and Scalping, providing consistent risk control regardless of the chosen timeframe. Real-Time Dynamic Adaptivity: The indicator calculates all risk management parameters (Entry, Stop Loss, Quantity) dynamically with every new bar, thus adapting instantly to changing market conditions. Trend Direction Adjustment: Define the analysis direction (Long/Uptrend or Short/Downtrend). Intraday Session Data Control: Full control over whether lookback calculations will include data from Extended Trading Hours (ETH), or if the daily calculations will start actively only from the first bar of Regular Trading Hours (RTH). Status Validation: The indicator performs critical status checks and displays clear Warning Messages if risk conditions are not met. 4. Intuitive Visualization and Real-Time Data Dynamic Tracking Lines: The Entry Price and Stop Loss lines are updated with every new bar. Crucially, the length of these lines dynamically reflects the calculation's lookback range (e.g., the extent of Lookback Bars or the location of the confirmed Pivot Point), providing a visual anchor for the calculated price. Risk and Reward Zones: The indicator creates a graphical background fill between Entry and Stop Loss (marked with the risk color) and between Entry and the Reward Targets (marked with the reward color). Essential Information Labels: Labels are placed at the end of each line, providing critical data: Estimated Entry Price, Stock/Contract Quantity (Quantity), Total Entry Amount, Estimated Stop Loss, Risk per Share, Total Financial Risk (Risk Amount), Exit Amount, Estimated Take Profit 1/2/3, Reward/Risk Ratio 1/2/3, Total Reward 1/2/3, TP Exit Amount 1/2/3. 4.1. Data Window Metrics (16 Full Series) The indicator displays 16 full data series in the TradingView Data Window, allowing precise tracking of every calculation parameter: Entry Data: Estimated Entry, Quantity, Entry Amount. Risk Data (Stop Loss): Estimated Stop Loss, Risk per Share, Risk Amount, Exit Amount. Reward Data (Take Profit): Estimated Take Profit 1/2/3, Reward/Risk Ratio 1/2/3, Total Reward 1/2/3, TP Exit Amount 1/2/3. 4.2. Instant Tracking in the Status Line The indicator displays 6 critical parameters continuously in the indicator's Status Line: Estimated Entry, Quantity, Estimated Stop Loss, Estimated Take Profit 1/2/3. 5. Detailed Indicator Inputs 5.1 General Focused Trend: Defines the analysis direction (Uptrend / Downtrend). Max Capital per Trade: The maximum amount allocated to purchasing stocks/contracts (in account currency). Risk per Trade: The maximum amount the user is willing to risk in this single trade (in account currency). ATR Length: The lookback period for the Average True Range (ATR) calculation. 5.2 Intraday Session Data Control Regular Hours Limitation : If enabled, all daily lookback calculations (for Entry/Stop Loss anchor points) will begin strictly from the first Regular Trading Hours (RTH) bar. This limits the lookback range to the current RTH session, excluding preceding Extended Trading Hours (ETH) data. Only relevant for Intraday charts. Default: False (Off) 5.3 Entry Inputs Entry Method: Selects the entry price calculation method: Current Price: Uses the closing price of the current bar as the estimated entry point (Market Entry). ATR Real Bodies Margin : - Uptrend: Calculates the Maximum Real Body over the lookback period + the calculated safety margin. - Downtrend: Calculates the Minimum Real Body over the lookback period - the calculated safety margin. ATR Bars Margin : - Uptrend: Calculates the Maximum High price over the lookback period + the calculated safety margin. - Downtrend: Calculates the Minimum Low price over the lookback period - the calculated safety margin. Lookback Bars: The number of bars used to calculate the extremes in the ATR-based entry methods (Relevant only for ATR Real Bodies Margin and ATR Bars Margin methods). ATR Multiplier (Entry): The multiplier applied to the ATR value. The result of the multiplication is the calculated safety margin used to determine the estimated Entry Price. 5.4 Risk Inputs (Stop Loss) Risk Method: Selects the Stop Loss price calculation method. ATR Current Price Margin : - Uptrend: Entry Price - the calculated safety margin. - Downtrend: Entry Price + the calculated safety margin. ATR Current Bar Margin : - Uptrend: Current Bar's Low price - the calculated safety margin. - Downtrend: Current Bar's High price + the calculated safety margin. ATR Bars Margin : - Uptrend: Lowest Low over lookback period - the calculated safety margin. - Downtrend: Highest High over lookback period + the calculated safety margin. ATR Pivot Margin : - Uptrend: The first confirmed Pivot Low point - the calculated safety margin. - Downtrend: The first confirmed Pivot High point + the calculated safety margin. Lookback Bars: The lookback period for finding the extreme price used in the 'ATR Bars Margin' calculation. ATR Multiplier (Risk): The multiplier applied to the ATR value. The result of the multiplication is the calculated safety margin used to place the estimated Stop Loss. Note: If set to 0, the Stop Loss will be placed exactly at the technical anchor point, provided the Minimum Margin Value is also 0. Minimum Margin Value: The minimum price value (e.g., $0.01) the Stop Loss margin buffer must be. Pivot (Left / Right): The number of bars required on either side of the pivot bar for confirmation (relevant only for the ATR Pivot Margin method). 5.5 Reward Inputs (Take Profit) Show Take Profit 1/2/3: ON/OFF switch to control the visibility of each Take Profit target. Reward/Risk Ratio 1/ 2/ 3: Defines the R/R ratio for the profit target. Must be ≥1.0. 6. Indicator Status/Warning Messages In situations where the Stop Loss location cannot be calculated logically and validly, often caused by a mismatch between the configured Focused Trend (Uptrend/Downtrend) and the actual price action, the indicator will display a warning message, explaining the reason and suggesting corrective action. Status Message 1: Pivot reference unavailable Condition: The Stop Loss is set to the "ATR Pivot Margin" method, but the anchor point (Pivot) is missing or inaccessible. Message Displayed: "Pivot reference unavailable. Wait for valid price action, or adjust the Regular Hours Limitation setting or Pivot Left/Right inputs." Status Message 2: Calculated Stop Loss is unsafe Condition: The calculated Stop Loss is placed illogically or unsafely relative to the trend direction and the Entry price. Message Displayed: "Calculated Stop Loss is unsafe for current trend. Wait for valid price action or adjust SL Lookback/Multiplier." 7. Summary The Adaptive Risk Management (ARM) indicator provides a seamless and systematic approach to trade execution and risk control. By dynamically automating all critical trade parameters—from Entry Price and Stop Loss placement to Position Sizing and Take Profit targets—ARM removes emotional bias and ensures every trade adheres strictly to your predefined risk profile. Key Benefits: Systematic Risk Control: Strict enforcement of maximum capital allocation and risk per trade limits. Adaptivity: Dynamic calculation of prices and quantities based on real-time market data (ATR and Lookback). Clarity and Trust: Clear on-chart visualization, precise data metrics (16 series), and unambiguous Status/Warning Messages ensure transparency and reliability. ARM allows traders to focus on strategy and analysis, confident that their execution complies with the core principles of professional risk management. Important Note: Trading Risk This indicator is intended for educational and informational purposes only and does not constitute investment advice or a recommendation for trading in any form whatsoever. Trading in financial markets involves significant risk of capital loss. It is important to remember that past performance is not indicative of future results. All trading decisions are your sole responsibility. Never trade with money you cannot afford to lose.
Wskaźnik Pine Script®
od sgbpulse
ATR ZigZag BreakoutATR ZigZag Breakout This strategy uses my ATR ZigZag indicator (powered by the ZigZagCore library) to scalp breakouts at volatility-filtered highs and lows. Everyone knows stops cluster around clear swing highs and lows. Breakout traders often pile in there, too. These levels are predictable areas where aggressive orders hit the tape. The idea here is simple: → Let ATR ZigZag define clean, volatility-filtered pivots → Arm a stop market order at those pivots → Join the breakout when the crowd hits the level The key to greater success in this simple strategy lies in the ZigZag. Because the pivots are filtered by ATR instead of fixed bar counts or fractals, the levels tend to be more meaningful and less noisy. This approach is especially suited for intraday trading on volatile instruments (e.g., NQ, GC, liquid crypto pairs). How It Works 1. Pivot detection The ATR ZigZag uses an ATR-based threshold to confirm swing highs and lows. Only when price has moved far enough in the opposite direction does a pivot become “official.” 2. Candidate breakout level When a new swing direction is detected and the most recent high/low has not yet been broken in the current leg, the strategy arms a stop market order at that pivot. • Long candidate → most recent swing high • Short candidate → most recent swing low These “candidate trades” are shown as dotted lines. 3. Entry, SL, and TP If price breaks through the level, the stop order is filled and a bracket is placed: • Stop loss = ATR × SL multiplier • Take profit = SL distance × RR multiplier Once a level has traded, it is not reused in the same swing leg. 4. Cancel & rotate If the market reverses and forms a new swing in the opposite direction before the level is hit, the pending order is cancelled and a new candidate is considered in the new direction. Additional Features • Optional session filter for backtesting specific trading hours
Strategia Pine Script®
od ReflexSignals
ATR ZigZag - Volatility-Filtered Market StructureDescription This indicator draws ZigZags using an ATR based threshold for direction switching to identify major swing highs and lows. Instead of relying on fractals or fixed bar-count swings, pivots are confirmed only when price moves beyond the prior extreme by: threshold = ATR(length) × ATR_mult This filters noise, enforces valid swing structure (high → low → high), and adapts automatically to volatility. The ATR ZigZag is ideal for traders who want a clean, objective view of swing structure without noise. This has many uses, including mapping swing structure, drawing chart patterns, and trading around extremes. Lag and Repainting Pivots are confirmed only after price moves sufficiently in the opposite direction. This creates necessary lag. The ZigZag is drawn when this occurs, and will anchor to the high/low in the past. Optional detection dot plots show exactly when confirmation occurred. What You See ZigZag: dashed gray line, repainted to anchor at the confirmed highs and lows Latest Pivot Levels: Dashed horizontal lines at the most recent confirmed high/low. Optional Live Swing Leg: A real-time line from the last confirmed pivot to the current swing extreme, updating until a new pivot forms. Optional ATR Boxes: 1×ATR shaded zones around the latest pivot for structural context. Optional Pivot Confirmation Dots: Markers show the bar where the threshold is crossed and a swing is officially confirmed. This is to understand the lag and see when the ZigZag repainted.
Wskaźnik Pine Script®
od ReflexSignals
Pivot Points Standard w/ Future PivotsPivot Points Standard with Future Projections This indicator displays traditional pivot point levels with an added feature to project future pivot levels based on the current period's price action. Key Features: Multiple Pivot Types: Choose from Traditional, Fibonacci, Woodie, Classic, DM, and Camarilla pivot calculations Flexible Timeframes: Auto-detect or manually select Daily, Weekly, Monthly, Quarterly, Yearly, and multi-year periods Future Pivot Projections: Visualize potential pivot levels for the next period based on current price movement Custom Price Scenarios: Test "what-if" scenarios by entering a custom close price to see resulting pivot levels Customizable Display: Adjust line styles, colors, opacity, and label positioning for both historical and future pivots Historical Pivots: View up to 200 previous pivot periods for context Future Pivot Options: The unique future pivot feature calculates what the next period's support and resistance levels would be using the current period's High, Low, Open, and either the current price or a custom price you specify for the closing value. Future pivots are displayed with customizable line styles (solid, dashed, dotted) and opacity to distinguish them from historical levels. Use Cases: Plan entries and exits based on projected support/resistance Scenario analysis with custom price targets Identify key levels before the period closes Multi-timeframe pivot analysis Works on all timeframes and instruments.
Wskaźnik Pine Script®
od CryptoPl3be
Unchased Wick Detector and ReversalsThis indicator can be used to track unchased wick from previous pivot points. The idea is to visualise liquidity cluster and grab before a potential reversal. Unchased wick Visual: - White lines are protected highs or lows. - Gray lines are previous wicks where prices have passed through and where the prices did not reverse. Reversal window: Reversal window parameters define a period range (a min and a max bars) where the reversal is valid. The idea is that the reversal must be done in the couple bars right after the wick is chased (this event should stay short in time but you can adjust the period as you wish). By default the default, the window 1-5 bars (e.g., daily, during 1-5 days). Green color indicates a grab from a low and a reversal to the upside. Red color indicates a grab from a high and a reversal to the downside. Disclamer: Of course this indicator can lead to false reversal signals and must be combined with other data and must be careful to use it alone for opening any position. This indicator is a Alpha version let me know if any problem.
Wskaźnik Pine Script®
od Wised123
Multi-Pivot Plotter//================================================================================ //📌 Manual Pivot Plotter (4 Sets: P, R1–R3, S1–S3) // - Up to 4 indices // - Each index: Name + P/S/R values // - One shared Style block: colors, visibility, line width (applies to all indices) // - Lines start at 00:00 UTC+8 and extend a few bars // - Labels at line end or start, with optional "Index Name" and price value //================================================================================
Wskaźnik Pine Script®
od Raj7rader
Daily Dual Pivots (Std + Fib) Extended by Jackel 簡介： 這個指標旨在為日內交易者提供最強大的支撐與阻力參考。它將市場上最常用的兩種 Pivot Points 計算方式——標準 (Standard) 與 斐波那契 (Fibonacci)——結合在同一個圖表中，讓你一眼就能看出關鍵的價格匯聚點 (Confluence Areas)。 主要特色： 雙重系統並存： 標準 Pivot (Standard)：以 實線 (Solid Lines) 顯示。這是機構與大部分交易者使用的傳統支撐阻力位。 斐波那契 Pivot (Fibonacci)：以 圓點/虛線 (Dotted Lines) 顯示。利用 Fib 黃金比例 (0.382, 0.618) 計算出的潛在反轉位。 清晰的視覺區分：標準版使用暖色系 (紅/綠/橙)，Fib 版使用冷色系 (藍/紫)，互不干擾，清晰易讀。 可選擴展關卡 (S4-S5 / R4-R5)：預設顯示 P, R1-R3, S1-S3。如果市場波動劇烈，你可以在設定中開啟 "Show Extra Levels" 來顯示 R4/R5 及 S4/S5。 自動隱藏歷史：預設只顯示「當日」的線條，保持圖表整潔。如需回測，可開啟「顯示歷史數據」選項。 如何使用： 當 實線 (Standard) 與 虛線 (Fib) 重疊或非常接近時，該區域通常具有更強的支撐或阻力效力。 適用於 15分鐘、1小時或 4小時圖表操作日內交易。 Introduction: This indicator is designed for intraday traders who need precise Support & Resistance levels. It combines the two most popular Pivot Point calculation methods—Standard (Traditional) and Fibonacci—into a single chart, allowing you to easily identify key areas of confluence. Key Features: Dual System Strategy: Standard Pivots: Displayed as Solid Lines. These represent the traditional structural levels used by most traders and institutions. Fibonacci Pivots: Displayed as Dotted/Circle Lines. These use key Fibonacci ratios (0.382, 0.618) to identify potential reversal zones. Visual Clarity: Different line styles and color groups allow you to distinguish between Standard and Fib levels instantly without chart clutter. Extended Levels (Optional): By default, it shows P, R1-R3, and S1-S3. In highly volatile markets, you can enable "Show Extra Levels" in the settings to reveal S4/S5 and R4/R5. Clean Chart: By default, it only shows levels for the current day. You can enable "Show History" in the settings if you need to backtest. How to Use: Look for Confluence: When a Solid Line (Standard) and a Dotted Line (Fib) overlap or are very close to each other, it indicates a very strong Support or Resistance zone. Best used on 15m, 1H, or 4H charts for intraday analysis.
Wskaźnik Pine Script®
od JackelMa
SMC Fib Range Signals [@gyanapravah]SMC Fib Range Signals This indicator blends Smart Money Concepts (SMC) with a Range Filter Trend System and Fibonacci Retracement & Extensions to generate high-probability automated Buy/Sell signals. Designed to avoid noise and focus on market structure + trend + price confluence, this tool is ideal for: 1. Intraday traders 2. Swing traders 3. Index & stock traders 4. Crypto & Forex traders CORE FEATURES Range Filter Trend Detection Smooth adaptive filter identifies true trend direction Visual confirmation: 🟢 Green filter = bullish pressure 🔴 Red filter = bearish pressure 🟡 Yellow filter = neutral Upper & Lower Bands act as dynamic support/resistance zones Smart Money Order Blocks (SMC) Automatically detects important pivot highs & lows Marks: OB High → supply / resistance zone OB Low → demand / support zone Continuously tracks latest OB levels for live price interaction Fibonacci Engine Detects the current swing zone and plots: Retracement levels 0.236 – 0.382 – 0.500 – 0.618 – 0.786 (editable) Extension targets 1.272 – 1.618 All levels update dynamically on new market structure and pivots. SIGNAL ENGINE This indicator generates signals from three independent confirmation systems: BUY SIGNALS trigger when: 1. Trend flips bullish (price crosses above the Filter) 2.Bullish trend + price reacts near: Order Block support Fibonacci 0.382 / 0.618 levels Bounce from the Lower Band with trend support All setups require volume confirmation to filter fake breakouts. SELL SIGNALS trigger when: 1. Trend flips bearish (price crosses below the Filter) 2. Bearish trend + price reacts near: Order Block resistance Fibonacci 0.382 / 0.618 levels Rejection from the Upper Band with trend support ALERTS READY Two built-in alerts: BUY Alert — fires on bullish signal SELL Alert — fires on bearish signal INPUT SETTINGS Trend Engine 1.Source 2.Sampling Period 3.Range Multiplier Smart Money Pivot detection sensitivity (Left / Right bars) Fibonacci 1.Swing lookback length 2.Editable Fib retracement and extension values 3.Toggle show/hide Fib levels BEST USE CASE Works extremely well on: ⏱️ 3M – 15M Intraday scalping ⏱️ 30M – 1H positional entries ⏱️ 4H – D1 swing trading Tested on: NIFTY / BANKNIFTY / FINNIFTY Stocks Crypto Forex DISCLAIMER This indicator is for educational purposes only. It does NOT guarantee profits. Always use: Proper risk management Stop-loss rules Your own confirmation before entering trades. AUTHOR Built & shared by @gyanapravah (Odisha, India) Open-source for learning and community improvement.
Wskaźnik Pine Script®
od gyanapravah_odisha
2
Auto Trend Channels OXEThis indicator automatically detects and draws trend channels based on swing highs and lows. How it works: It identifies pivot points (swing highs/lows) using your chosen lookback period, then connects consecutive pivots to form channels: Descending channels connect lower highs (resistance line), with a parallel support line projected from the lowest low between those highs Ascending channels connect higher lows (support line), with a parallel resistance line projected from the highest high between those lows Key features: Channels extend forward so you can see where price might interact with them Broken channels automatically switch to dashed lines and show "✗" labels Fill shading helps visualize the channel zone Info table shows current pivot counts Trading application: You'd use this for identifying trend direction and potential reversal zones. Price bouncing off channel boundaries = continuation. Price breaking through = potential trend change or acceleration. The "break detection" highlighting makes it easy to spot when a channel has been invalidated. The pivot length setting is your main control - higher values find longer-term, more significant channels; lower values catch shorter-term moves.
Wskaźnik Pine Script®
od FXOXE
1
DCA Ladder CalculatorThis script is a DCA (Dollar-Cost Averaging) Ladder Calculator with Risk & Leverage Management baked in. It’s designed for both LONG and SHORT positions, and helps you: 🎯 Strategically scale into positions across multiple entry points 🔐 Control risk exposure via defined capital allocation ⚖️ Utilize leverage responsibly — for efficiency, not destruction 🧮 Visualize risk, stop loss level, and entry distribution 🔁 Adapt to trend reversals or key zones, especially when combined with reversal indicators or higher timeframe signals 🧠 How It Works This tool takes a capital allocation approach to building a ladder of positions: 1. You define: - Portfolio value - Risk per trade (as %) - Leverage - Number of DCA levels - Entry multiplier (e.g. 1x, 2x, 4x...) 2. The script then: - Calculates total margin to risk = Portfolio × Risk % - Calculates total leveraged position size = Margin × Leverage - Distributes entries according to exponential weights (1x, 2x, 4x...), totaling 7 for 3 levels - Calculates per-entry: - Entry price (based on price zone spacing) - Multiplier - Exact margin per entry - Leverage per entry (margin × leverage) - Computes: - Average entry price (margin-weighted) - Approximate stop loss level based on recent ATR and price structure - % drawdown to SL - Total margin and position size 3. Displays all this in a clean on-chart table. 📈 How to Use It 1. Apply the indicator to a chart (default: 1D — ideal for clean zones). 2. Configure your: - Portfolio Value (total trading capital) - Risk per Trade (%) (your acceptable loss) - Leverage (exchange or strategy-based) - DCA Levels (e.g. 3 = anchor + 2 entries) - Multiplier (typically 2.0 for doubling) 3. Choose LONG or SHORT mode depending on direction. 4. The table will show: - Entry price ladder - Margin used per entry - Total position size - Approx. stop loss (where your full risk is defined) Use in conjunction with price action, S/R zones, trendline breaks, volume divergence, or reversal indicators. ✅ Best Practices for Using This Tool - Leverage is a tool, not a weapon. Use it to scale smartly — not recklessly. - Use fewer, higher-conviction entries. Don’t blindly ladder; combine with price structure and signals. - Stick to your risk percent. Never risk more than you can afford to lose. Let this calculator enforce discipline. - Combine with other confirmation tools, like RSI divergence, momentum shifts, OB zones, etc. - Avoid martingale-style over-exposure. This is not a gambling tool — it’s for capital efficiency. 🛡️ What This Tool Does NOT Do - This is not a trade signal indicator. - It does not place trades or auto-manage positions. - It does not replace personal responsibility or strategy — it's a tool to help apply structure. ⚠️ Disclaimer This script is for educational and informational purposes only. It does not constitute financial advice, nor is it a recommendation to buy or sell any financial instrument. Always consult a licensed financial advisor before making investment decisions. Use of leverage involves high risk and can lead to substantial losses. The author and publisher assume no liability for any trading losses resulting from use of this script.
Wskaźnik Pine Script®
od RWCS_LTD
1
Pivot Hourly x EMA RibbonHourly Fibonacci Pivot + EMA is an intraday analysis tool that combines hourly Fibonacci-based pivot levels with exponential moving averages (EMAs). It is designed to help traders visualize potential intraday support/resistance zones and short-term trend direction on any timeframe. The indicator calculates pivot levels from hourly price data and then projects Fibonacci extensions and retracements around a central pivot. These levels can be used to see where price has previously reacted and where future reactions may occur. The EMAs provide an additional layer of context by highlighting the prevailing short-term trend and momentum. Key features: Hourly Fibonacci pivot levels (support and resistance zones derived from hourly ranges) Multiple Fibonacci bands to show potential reaction areas above and below the central pivot One or more configurable EMAs to show short-term trend direction and dynamic support/resistance Works on all symbols and intraday timeframes supported by TradingView Typical use: Monitor how price behaves when approaching or rejecting Fibonacci pivot levels Look for confluence between pivot zones and EMA direction or EMA bounces Use the levels as potential areas of interest for trade planning, stop placement, or partial profit zones within your own trading system Also have "C" Label it's mean Candle for example C1 is First Candle of the source timeframe, if the source timeframe set to 4 Hour it will be the first 4h candle, the C2 is the second 4h candle of the day. This script is intended purely as a technical analysis tool and does not generate buy/sell signals or guarantee any particular outcome. It is not financial advice. Always combine it with your own analysis, risk management, and trading plan before making any trading decisions.
Wskaźnik Pine Script®
od AtomicPips
KENW Liq Sweep 17This indicator is designed to alert on potential liquidity sweep events: - In uptrends, it tracks Sell-Side Liquidity (SSL) by marking swing lows that occur during negative MACD histogram periods. It generates a long entry alert when price makes a lower low in SSL (i.e., the most recent SSL level is below the prior one), suggesting a sweep of sell-side liquidity before a potential bullish continuation. - In downtrends, it tracks Buy-Side Liquidity (BSL) by marking swing highs that occur during positive MACD histogram periods. It generates a short entry alert when price makes a higher high in BSL (i.e., the most recent BSL level is above the prior one), indicating a sweep of buy-side liquidity before a potential bearish continuation.
Wskaźnik Pine Script®
od KENWWW
Manual Pivot Plotter//================================================================================ //📌 Manual Pivot Plotter (P, R1–R3, S1–S3) //📈 Pine Script v6 // //This script allows the user to manually input Pivot levels (P), Resistance levels //(R1, R2, R3), and Support levels (S1, S2, S3). Each line starts at the beginning //of the new trading day (detected at 00:00 UTC+8) and extends only a limited //distance into the future (default: 3 bars). // //Features: //✔ Manual pivot, support, and resistance level inputs //✔ Lines refresh automatically at each new day (00:00 UTC+8) //✔ Lines extend only a few bars ahead (not full chart) //✔ Clean label placement slightly below line and near line end //✔ No repainting, memory-safe line handling //✔ Smooth intraday updates when values are edited // //This tool is ideal for traders who manually calculate or import pivot levels and //prefer clean, minimal, non-intrusive visual levels on the chart. //================================================================================
Wskaźnik Pine Script®
od Raj7rader
Psychological levels [Kodologic] Psychological levels Markets are not random, they are driven by human psychology and algorithmic order flow. A well-known phenomenon in trading is the "Whole Number Bias" — the tendency for price to react significantly at clean, round numbers (e.g., Bitcoin at $95,000 or EURUSD at 1.0500). Manually drawing horizontal lines at every round number is tedious, clutters your object tree, and distracts you from analyzing price action. Psychological levels Numbers is a workflow utility designed to solve this problem. It automatically projects a clean, customizable grid of key price levels onto your chart, helping you instantly identify areas where liquidity and orders are likely to cluster. Why This Indicator Helps Traders : Professional traders know that "00" and "50" levels act as magnets for price. Here is how this tool assists in your analysis: 1. Institutional Footprints : Large institutions and bank algorithms often execute orders at whole numbers to simplify accounting. This script highlights these potential liquidity zones automatically. 2. Support & Resistance Discovery: You will often notice price wicking or reversing exactly on these grid lines. This helps in spotting natural support and resistance without needing complex technical analysis. 3. Cognitive Load Reduction: Instead of calculating where the next "major level" is, the grid is visually present, allowing you to focus on candlestick patterns and market structure. Features : Dynamic Calculation : The grid updates automatically as price moves, you never have to redraw lines. Zero Clutter : The lines are drawn using code, meaning they do not appear in your manual drawing tools list or clutter your object tree. Fully Customizable Step : You define what constitutes a "Round Number" for your specific asset class (Forex, Crypto, Indices, or Stocks). Visual Control : Adjust line styles (Solid, Dotted, Dashed), colors, and transparency to keep your chart aesthetic and readable. How to Use in Your Strategy : 1. Target Setting (Take Profit) If you are in a long position, use the next upper grid line as a logical Take Profit area. Price often gravitates toward these whole numbers before reversing or consolidating. 2. Stop Loss Placement Avoid placing Stop Losses exactly on a round number, as these are often "stop hunted." Instead, use the grid to visualize the level and place your stop slightly *below* or *above* the round number for better protection. 3. Confluence Trading Do not use these lines in isolation. Look for Confluence : Example: If a Fibonacci 61.8% level lines up exactly with a Round Number grid line, that level becomes a high-probability reversal zone. Settings Guide (Important) Since every asset is priced differently, you must adjust the "levels Step Size" to match your instrument: Forex (e.g., EURUSD, GBPUSD): Set Step Size to `0.0050` (50 pips) or `0.0100` (100 pips). Crypto (e.g., BTCUSD): Set Step Size to `500` or `1000`. Indices (e.g., US30, SPX500): Set Step Size to `100` or `500`. Gold (XAUUSD):** Set Step Size to `10`. Disclaimer: This tool is for educational and visual aid purposes only. It does not provide buy or sell signals. Always manage your risk.
Wskaźnik Pine Script®
od Kodologic
Tomo's Pivots // last W, last M, last Q, last30d, last90d.These are pivots that you can use to look back at various time periods to find magnetic Price points of support and resistance. There are: weekly, last 30 days, last month, last 90 days, and last quarter. You can change the color and style of every indicator and its label. So if it happens to be November 29 today, you will see the last 90 days representing 90 days before November 29. But you will also see last quarter which represents from July 1 to September 30. These values are fair value equilibrium price point by averaging the high low and close of that time period. Weekly is great for intraday trading and the last 30 is great for momentum. Consider using the monthly for swing trading. Stay in the green.
Wskaźnik Pine Script®
od bmkslneioc
Confirmed Pivots + MACD Signals (with BOS Lines)Confirmed Pivots + MACD Signals This indicator combines confirmed swing highs/lows (pivots) with MACD-based momentum signals to highlight key reversal and continuation points on the chart. Core Logic Confirmed Pivots: The script identifies swing highs and lows using the user-defined pivot confirmation length. Once a structure is broken beyond the last pivot, that level becomes a confirmed support (CL) or resistance (CH) line. These levels are plotted as dashed horizontal rays and labeled directly on the chart. MACD Integration: The classic MACD crossover/under logic is used: Bullish Crossover: MACD line crosses above the Signal line. Bearish Crossunder: MACD line crosses below the Signal line. Signal Filtering by Proximity: A Proximity Zone (%) defines how close price must be to an active support or resistance to trigger a signal. Buy Signal: When price is within the support zone and a bullish MACD crossover occurs. Sell Signal: When price is within the resistance zone and a bearish MACD crossunder occurs. Inputs Pivot Confirmation Length: Bars used to confirm swing points. MACD Fast/Slow/Signal Lengths: Standard MACD settings. Proximity Zone (%): Defines zone width (e.g., 1% around active level). Output Labels: "CH" (Confirmed High) and "CL" (Confirmed Low) with color-coded dashed lines. Signals: "BUY" and "SELL" markers appear when both pivot and MACD conditions align. Tips Works best on higher timeframes (H1 and above). Combine with price action or trend filters for confirmation. Use proximity percentage according to volatility (e.g., smaller % for low-vol assets). ⚠️ Disclaimer: This script is provided for educational and informational purposes only. It does not constitute financial or investment advice, and the author is not responsible for any financial losses that may occur from its use. Always perform your own analysis and use this indicator together with other technical and risk management tools before making trading decisions. --------------------------------------------------------------------------------------------- سقف و کف تاییدشده + سیگنال‌های MACD این اندیکاتور ترکیبی از شناسایی سقف‌ها و کف‌های تاییدشده (Pivot High/Low) به همراه سیگنال‌های مومنتوم MACD است که نقاط برگشت یا ادامه‌ی روند را روی چارت مشخص می‌کند. 🔹 منطق عملکرد تایید سقف و کف‌ها: ابتدا سقف و کف‌های محلی بر اساس تعداد کندل‌های تنظیم‌شده شناسایی می‌شوند. وقتی ساختار قیمتی از آخرین سقف یا کف عبور کند، آن سطح به عنوان حمایت یا مقاومت تاییدشده در نظر گرفته شده و با برچسب‌های “CL” (کف تاییدشده) و “CH” (سقف تاییدشده) و خطوط نقطه‌چین رسم می‌شود. ادغام با MACD: از منطق کلاسیک کراس‌اور/کراس‌آندر MACD استفاده شده است: کراس صعودی: عبور خط MACD از بالای خط سیگنال. کراس نزولی: عبور خط MACD از زیر خط سیگنال. فیلتر سیگنال با ناحیه مجاور: با استفاده از درصد ناحیه مجاور (Proximity Zone %)، فقط زمانی سیگنال صادر می‌شود که قیمت نزدیک حمایت یا مقاومت فعال باشد. سیگنال خرید: وقتی قیمت در ناحیه‌ی حمایت و همزمان MACD صعودی شود. سیگنال فروش: وقتی قیمت در ناحیه‌ی مقاومت و همزمان MACD نزولی شود. تنظیمات ورودی طول تأیید پیوت‌ها تنظیمات MACD (Fast, Slow, Signal) درصد ناحیه مجاور برای فعال شدن سیگنال‌ها خروجی‌ها برچسب‌های “CL” و “CH” برای سطوح تاییدشده نشانگرهای “BUY” و “SELL” در محل صدور سیگنال نکات کاربردی بهترین عملکرد در تایم‌فریم‌های بالاتر (۱ ساعته به بالا) برای دقت بیشتر، آن را با فیلتر روند یا پرایس‌اکشن ترکیب کنید درصد ناحیه مجاور را با توجه به نوسانات دارایی تنظیم کنید
Wskaźnik Pine Script®
od farcominvestment
Divergence Detector (MACD + Volume)Divergence Detector (MACD + Volume Confirmation) This indicator automatically detects bullish and bearish divergences between price and MACD, enhanced with volume confirmation to filter out weak signals. 🔹 Core Logic Pivot Detection: The script identifies swing highs and lows (pivots) using customizable left/right lookback values. Bullish Divergence: Occurs when price makes a lower low, but MACD makes a higher low. A label "Bull Div" appears below the bar; if confirmed by high volume, it shows "Bull Div 🔥". Bearish Divergence: Occurs when price makes a higher high, but MACD makes a lower high. A label "Bear Div" appears above the bar; if confirmed by high volume, it shows "Bear Div 📉". Volume Confirmation: The indicator checks whether the volume at the pivot bar is above the moving average of volume (customizable length). This ensures that divergence signals are backed by strong market participation. Inputs MACD Fast/Slow/Signal Length – standard MACD parameters Pivot Lookback Left/Right – defines the swing structure sensitivity Volume MA Length – defines how volume strength is validated Output Labels: 🔹 Bull Div / Bull Div 🔥 → Bullish divergence (confirmed with volume) 🔹 Bear Div / Bear Div 📉 → Bearish divergence (confirmed with volume) Tips Works best on higher timeframes and trending markets. Volume confirmation helps filter false divergences in low liquidity conditions. Combine with trend or structure indicators for better trade setups. ---------------------------------------------------------------------------------------------- اندیکاتور شناسایی واگرایی MACD با تأیید حجم این اندیکاتور به‌صورت خودکار واگرایی‌های صعودی و نزولی بین قیمت و MACD را شناسایی کرده و با استفاده از تأیید حجم (Volume Confirmation) سیگنال‌های ضعیف را فیلتر می‌کند. 🔹 منطق عملکرد شناسایی پیوت‌ها: نقاط چرخش (سقف و کف) با استفاده از تعداد کندل‌های قابل تنظیم در دو سمت شناسایی می‌شوند. واگرایی صعودی (Bullish): زمانی که قیمت کف پایین‌تر و MACD کف بالاتر می‌سازد. برچسب "Bull Div" در زیر کندل نمایش داده می‌شود؛ اگر حجم بالا باشد، با علامت 🔥 مشخص می‌گردد. واگرایی نزولی (Bearish): زمانی که قیمت سقف بالاتر و MACD سقف پایین‌تر می‌سازد. برچسب "Bear Div" در بالای کندل نمایش داده می‌شود؛ اگر حجم بالا باشد، با 📉 مشخص می‌گردد. تأیید حجم: اگر حجم در کندل پیوت بالاتر از میانگین متحرک حجم باشد، سیگنال معتبرتر در نظر گرفته می‌شود. تنظیمات ورودی تنظیمات MACD (Fast, Slow, Signal) پارامترهای شناسایی پیوت (Left / Right) طول میانگین متحرک حجم (Volume MA Length) خروجی‌ها Bull Div 🔥 / Bear Div 📉 برای واگرایی‌های تأییدشده با حجم Bull Div / Bear Div برای واگرایی‌های بدون تأیید حجم نکات کاربردی بهترین عملکرد در تایم‌فریم‌های بالا و بازارهای دارای روند تأیید حجم به حذف سیگنال‌های اشتباه در شرایط حجم پایین کمک می‌کند برای دقت بیشتر، آن را با اندیکاتورهای روند یا ساختار ترکیب کنید ⚠️ Disclaimer: This script is provided for educational and informational purposes only. It does not constitute financial advice, and the author is not responsible for any financial losses caused by its use. Always confirm signals with your own analysis and other tools before making trading decisions. ⚠️ توجه: این اسکریپت صرفاً جهت آموزش و اطلاع‌رسانی طراحی شده و توصیه مالی یا سرمایه‌گذاری محسوب نمی‌شود. نویسنده مسئول هیچ‌گونه ضرر یا زیان احتمالی ناشی از استفاده از آن نیست. لطفاً پیش از هر تصمیم معاملاتی، تحلیل شخصی خود را انجام داده و از این ابزار در کنار سایر ابزارهای تحلیل و مدیریت ریسک استفاده کنید.
Wskaźnik Pine Script®
od farcominvestment
1
Floor Trader PivotsGenerated by: Claude Sonnet 4.5 Pine Script that draws Floor Trader Pivots using 'daily' price levels with configurable options. Key Features: Pivot Calculation: Uses the classic formula: Pivot = (High + Low + Close) / 3 Resistance levels: R1, R2, R3 Support levels: S1, S2, S3 Optional mid-pivots between main levels Configurable Settings: Timeframe: Choose Daily, Weekly, or Monthly pivots Display toggles: Show/hide individual levels Colors: Customize each level's color Line style: Solid, dashed, or dotted Line width: 1-5 pixels Extension: None, right, or both directions Labels: Show/hide with left or right positioning Calculations: R1 = 2×Pivot - Low R2 = Pivot + (High - Low) R3 = R1 + (High - Low) S1 = 2×Pivot - High S2 = Pivot - (High - Low) S3 = S1 - (High - Low) Uses daily price levels specifically. Added daily-specific data fetching: The script now explicitly fetches both current day and previous day's high, low, and close prices Calculations use daily data: All pivot calculations now use prevDailyH, prevDailyL, and prevDailyC (previous day's high, low, close) Kept the timeframe input: You can still change it if you want weekly or monthly pivots, but it now defaults to and emphasizes daily calculations The Floor Trader Pivots will now always be based on the previous day's price action, which is the traditional method floor traders use. This is particularly useful for intraday trading as these levels update daily and provide key support/resistance zones.
Wskaźnik Pine Script®
od pallepati
Oracle Pivot Engine (OPE) — @darshaksscThe Oracle Pivot Engine (OPE) is a market-structure visualization tool that derives all its levels exclusively from historical price data — specifically, the previous day’s high, low, and mid-range. It does not provide signals, alerts, entries, exits, predictions, or trade recommendations. Instead, it creates a non-repainting reference framework that helps users observe how the current session interacts with the prior session’s completed price structure. All calculations are analytical, static, and based on fully closed candles. 🧠 How It Works (Core Logic Explained) OPE computes the following values from the completed prior daily candle: Prior-Day High Prior-Day Low Prior-Day Midpoint Displacement Range = High − Low This displacement range is used to generate symmetrical upward and downward reference zones. These levels do not update during the session. They refresh only once per day when a new daily candle closes. This ensures the indicator remains fully non-repainting and stable on every intraday chart. 📐 Reference Levels Generated Using the fixed prior-day displacement range, OPE plots: 1. BUY-Side Reference Map (Upward Bias) BUY Reference Entry BUY Reference Stop BUY T1 BUY T2 BUY T3 BUY T4 BUY T5 BUY T6 These are not trade signals — they are mathematical extensions above the prior-day midpoint for structural interpretation only. 2. SELL-Side Reference Map (Downward Bias) SELL Reference Entry SELL Reference Stop SELL T1 SELL T2 SELL T3 SELL T4 SELL T5 SELL T6 Again, these levels are not directives. They are mirrored displacement extensions below the prior-day midpoint. 📊 Pivot Zone & Bands The indicator includes optional visual layers derived from the same prior-day pivots: Pivot High–Low Zone Shading → shows the prior-day full range Pivot Midline → prior-day mid-price Outer Displacement Bands → extended contextual boundaries These are purely visual boundaries meant to improve market context. 🧾 Dashboard / HUD Explanation A compact on-chart HUD summarizes all values. It displays: Section | Information (All Historical) Prior-Day Pivots | High, Low, Mid, Range BUY Map | Entry, Stop, T1–T6 SELL Map | Entry, Stop, T1–T6 The HUD allows you to quickly review: Where the current price is relative to the previous day’s structure How far price is from each level Whether the session is operating inside or outside the prior-day displacement zones Everything shown is static, non-repainting , and for reference only . 📊 How to Analyze It ✔ 1. Contextual Awareness OPE helps users visually compare current intraday price to prior daily structure. You can observe whether price is: Inside yesterday’s high/low zone Above the prior-day displacement Below the prior-day displacement This offers a clearer understanding of daily context and volatility. ✔ 2. Structural Symmetry The BUY-side and SELL-side maps extend from the same pivot logic. This can help visualize: Expansion away from the prior-day midpoint Compression within the prior-day range Symmetrical displacement around key reference levels Again — these are observational insights , not signals. ✔ 3. Range Interaction As the session unfolds, users often study: How price reacts around prior-day midpoint Whether price is gravitating toward or away from the displacement levels How intraday swings behave within these historical boundaries This type of analysis is contextual , not predictive. ⚠️ Important Disclosures This script does NOT generate trading signals. It does NOT predict future price movement. It does NOT contain advice, instructions, recommendations, or strategies. All levels are derived exclusively from historical daily candle data . This is strictly an informational visualization tool meant to support chart analysis. Past price levels do not guarantee any future price behavior. 🛑 Disclaimer This indicator is provided solely for educational and informational purposes. It should not be interpreted as financial advice or a call to action of any kind. Users should apply independent judgment and discretion when analyzing markets.
Wskaźnik Pine Script®
od darshakssc
Fractals Trend [BigBeluga]🔵 OVERVIEW Fractals Trend is a trend-following overlay that leverages fractal swing points to define dynamic support and resistance zones. By storing and averaging recent high and low fractals, it determines trend direction and plots a smooth band that flips depending on market bias—displaying support during uptrends and resistance during downtrends . 🔵 CONCEPTS Fractal Swings: Fractals are identified using a customizable length. A high fractal forms when the current high is the highest in a range; a low fractal when the current low is the lowest. Fractal Memory: The indicator keeps a rolling window of recent high and low fractals inside arrays, limited by the user-defined storage quantity. switch upperF => FracrtalsUpper.push(high ) lowerF => FracrtalsLower.push(low ) FracrtalsUpper.size() > fCount => FracrtalsUpper.shift() FracrtalsLower.size() > fCount => FracrtalsLower.shift() Trend Detection: Price crossing above the average, min/max or median high fractals signals an uptrend; crossing below average, min/max or median low fractals signals a downtrend. Dynamic Band Plotting: Depending on the trend, the script plots the average of either the upper or lower fractals as a trailing support or resistance line. Visual Confirmation: Fractal labels appear as triangle markers at highs and lows, providing additional structural context. 🔵 FEATURES Automatically detects high and low fractals using customizable length. Stores a defined number of fractals to smooth out noise and reduce false signals. Flips trend bias dynamically with colored band and smooth transitions. Plots fractal-based support in bullish trends, resistance in bearish trends. Triangle markers show real-time fractal highs and lows. Fully configurable visuals, color themes, and fractal detection logic. Clean, non-intrusive overlay that works on any market or timeframe. 🔵 HOW TO USE Use the colored band as a directional filter: green = uptrend (support), orange = downtrend (resistance). Combine with entry signals or break/retest strategies when price approaches the band. Use triangle markers to confirm structural swing points. Adjust Fractals Length to tune sensitivity—shorter values detect quicker shifts, longer values reduce noise. Change the fractal bands type to adapt trend detection to different market conditions. Use in conjunction with momentum or volume tools for confluence. 🔵 CONCLUSION Fractals Trend offers a lightweight, intuitive way to track market bias using price structure alone. Its smart switching logic and clean visuals make it a powerful tool for trend traders seeking structure-based dynamic S/R—without laggy moving averages or overcomplicated signals.
Wskaźnik Pine Script®
od BigBeluga
2
Universal Pivot ScannerUniversal Pivot Scanner Professional pivot pattern detection for any market data source. A robust pivot detector designed to work across all timeframes and data types - price action, technical indicators, volume, or custom studies. One tool, multiple applications. Core Functionality Identifies two high-probability retracement patterns: HH+HL → Bullish continuation setup (higher high followed by higher low) LL+LH → Bearish continuation setup (lower low followed by lower high) Key Features Non-repainting detection. Labels and alerts trigger at pivot confirmation, ensuring real-time actionable signals without historical bias. Source flexibility. Compatible with any input - price data, oscillators (RSI, MACD), volume analysis, or proprietary indicators. Single implementation across multiple strategies. Adaptive configuration. Adjustable lookback period optimizes performance for different market conditions and data types. Recommended Settings Lookback: 1 → Oscillators and momentum indicators Lookback: 3-10 → Price action and ranging markets Includes visualization table displaying recent pivot sequence and active pattern status. Designed for systematic traders requiring consistent, verifiable signals across diverse market conditions.
Wskaźnik Pine Script®
od meddymarkusvanhala
2