Rozpocznij

AND

XAUUSD S/R Zones [MatsukazeAlgo]🇬🇧 ENGLISH A volume-weighted Support and Resistance zone indicator optimized for Gold (XAUUSD). Builds zones from clustered pivot points, weighted by volume and wick rejection. Stronger institutional participation = more vivid zones. Weak levels fade into the background. Gold's $50/$100 psychological levels are detected automatically when they align with a volume-backed zone. Concepts Volume-Weighted Clustering — Traditional S/R tools draw a line at every pivot. This indicator clusters nearby pivots together, then weights each one by its volume and wick size. A pivot with heavy volume and a deep rejection wick scores far higher than a quiet poke. The result is fewer zones on the chart, but the ones that appear have measurable institutional backing behind them. Zone Strength Rating — Each zone receives a relative strength score (★ to ★★★) compared to other active zones. This is not arbitrary — it derives from the weighted sum of all pivots in the cluster, decayed by age. A ★★★ zone has the most institutional interest on the chart right now. Age Fading — Zones that haven't been touched recently fade in transparency. Fresh zones stay vivid. This creates a natural visual hierarchy without manual cleanup. Psychological Level Confluence — Gold respects $50 and $100 round numbers as institutional order clusters. When a volume-weighted zone aligns with a psychological level, the zone is highlighted with a gold border and ★ marker. This confluence represents the highest-probability S/R on Gold. Preset System — Four presets adapt the pivot parameters for different timeframes and trading styles. Scalp uses tight pivots for 1-5m charts. Local tightens zones from recent structure. Swing (default) balances depth and relevance. Major surfaces macro levels for 4H-Daily. How It Works 1. Pivot Detection: Configurable left/right bar lookback confirms pivot highs and lows. Each pivot records its price, bar index, volume, and wick size. 2. Clustering: Pivots within a tolerance distance (ATR-based) are grouped. A minimum bar spacing prevents tight consolidations from inflating a single zone. 3. Weighting: Each pivot's contribution is weighted by volume, wick depth, and recency (exponential decay). The weighted center becomes the zone's price level. 4. Zone Selection: Zones are ranked by total weighted strength. Only the top N per side (default 6) are displayed. 5. Lifecycle: Active zones extend right until broken (close beyond the zone) or dropped (replaced by stronger pivots). Broken zones can optionally be displayed as historical reference. Gold-Specific Features Psychological Level Confluence — When a zone contains a $50 or $100 round number, it receives a gold-coloured border and a ★ marker in the label. Gold traders know these levels matter — this feature surfaces the confluence automatically. DXY Direction — The stats table shows current DXY direction (▲/▼). Support zones carry more weight when DXY is falling (Gold bullish bias). Resistance zones carry more weight when DXY is rising. MatsukazeAlgo Palette — Support zones in teal, resistance in rose. Psych confluence zones in gold. Broken zones in muted tones. Consistent with the full MatsukazeAlgo Gold toolkit. Signals (Optional, Default: Test Markers ON with RSI Filter) Successful Test — A circle appears when price touches a zone and closes back in the rejection direction. Confirms the zone is holding. Filtered by RSI by default (only fires at oversold for support, overbought for resistance). Retest — A diamond appears when price returns to a previously broken zone and reacts. The classic broken-resistance-becomes-support setup. Default OFF. Zone Reaction — Small diamonds when price touches and holds, bold labels when a zone breaks. Default OFF. RSI Filter — Reduces signals to higher-conviction setups by requiring RSI extremes. Default ON. Cooldown — Prevents the same zone from firing repeated signals within a configurable bar window (default 20). Input Reference Zone Strength — Preset selector: Scalp / Local / Swing (default) / Major / Custom. Custom Parameters — Left Bars, Right Bars (pivot confirmation), Cluster Tolerance (×ATR, how far apart pivots can be to merge), Min Bars Between Touches, Pivot Memory (how far back to look). Zones — Active Zones Per Side (default 6), Min Touches (default 2), Fade After (bars before transparency increases), Hide Zones Farther Than (% from current price). Broken Zones — Show Broken (confirmed breaks), Show Dropped (replaced by stronger pivots). Both default OFF. Signals — Test Markers (default ON), Retest Markers (default OFF), Zone Reaction (default OFF), RSI Filter (default ON), RSI Length/Oversold/Overbought, Cooldown Bars, Retest Window. Gold Settings — Psych Confluence: detect $50/$100 within zones. Confluence Colour (default gold). DXY Alignment: show in stats table. Stats Table — Show Table (default OFF), Position, Size, Text/Title Colour. Displays active support/resistance count, psych confluence count, and DXY direction. Style — Color by Volume (high-volume zones more vivid), Show Labels (strength + touches + volume), Show Volume Score, Volume Format (Absolute/Percentage), Zone Opacity. Alerts — 9 types: Resistance Touched, Support Touched, Resistance Broken, Support Broken, Support Test, Resistance Test, Bullish Retest, Bearish Retest, New Pivot. Conclusion XAUUSD S/R Zones replaces guesswork with measurement. Every zone on the chart has volume and rejection data behind it. The strength rating tells you which levels matter most right now. The psychological level confluence highlights where institutional volume meets Gold's natural round-number structure. Four presets let you switch from scalping to swing trading in one click. Recommended timeframe: 1min–1H on XAUUSD (use Scalp preset for lower timeframes). --- Based on Support and Resistance Zones by FeelsStrategy . This version adds psychological level confluence with gold highlighting, DXY alignment, MatsukazeAlgo colour palette, session stats table, bilingual UI, and Gold-specific tuning. --- 🇯🇵 日本語 ゴールド（XAUUSD）に最適化されたボリューム加重サポート＆レジスタンスゾーンインジケーターです。クラスター化されたピボットポイントからゾーンを構築し、ボリュームとウィックのリジェクションで重み付け。機関投資家の参加が大きいほど鮮明なゾーンになります。弱いレベルは背景に溶けます。ゴールドの$50/$100心理的価格帯がボリューム裏付けゾーンと一致すると自動検出されます。 コンセプト ボリューム加重クラスタリング — 従来のS/Rツールは全てのピボットにラインを引きます。このインジケーターは近接するピボットをクラスター化し、各ピボットをボリュームとウィックサイズで重み付けします。大量のボリュームと深いリジェクションウィックを持つピボットは、静かなタッチよりはるかに高いスコアを得ます。結果として、チャート上のゾーンは少なくなりますが、表示されるものには測定可能な機関投資家の裏付けがあります。 ゾーン強度ランキング — 各ゾーンは他のアクティブゾーンと比較して相対的な強度スコア（★〜★★★）を受けます。クラスター内の全ピボットの加重合計から導出され、経過時間で減衰します。★★★ゾーンは現在チャート上で最も機関投資家の関心が高い場所です。 経過フェード — 最近タッチされていないゾーンは透明度が上がります。新鮮なゾーンは鮮明に残ります。手動のクリーンアップなしで自然な視覚的優先順位が生まれます。 心理的価格帯の合流 — ゴールドは$50/$100のラウンドナンバーを機関投資家の注文クラスターとしてリスペクトします。ボリューム加重ゾーンが心理的価格帯と一致すると、ゴールド色のボーダーと★マーカーでハイライトされます。この合流がゴールドで最も高確率のS/Rです。 プリセットシステム — 4つのプリセットがタイムフレームとトレーディングスタイルに合わせてピボットパラメータを調整。Scalp（1-5分）、Local（短期構造）、Swing（デフォルト、バランス型）、Major（4H-日足のマクロレベル）。 仕組み 1. ピボット検出：設定可能な左右バー数でピボット高値/安値を確認。各ピボットは価格、バーインデックス、ボリューム、ウィックサイズを記録。 2. クラスタリング：ATRベースの許容距離内のピボットをグループ化。最小バー間隔で密な保ち合いがゾーンを膨張させるのを防止。 3. 重み付け：各ピボットの寄与をボリューム、ウィック深さ、経過時間（指数減衰）で重み付け。加重中心がゾーンの価格レベルに。 4. ゾーン選択：全ゾーンを加重強度でランク付け。片側上位N個（デフォルト6）のみ表示。 5. ライフサイクル：アクティブゾーンはブレイク（終値がゾーンを超える）またはドロップ（より強いピボットに置換）まで右に延長。ブレイク済みゾーンは過去の参照として表示可能。 ゴールド専用機能 心理的価格帯の合流 — ゾーンに$50/$100のラウンドナンバーが含まれる場合、ゴールド色ボーダーとラベルに★マーカー。ゴールドトレーダーがこれらのレベルを重視することを知っている — この機能が合流を自動で検出します。 DXY方向 — 統計テーブルにDXY方向（▲/▼）を表示。DXY下落時はサポートゾーンの重みが増し、DXY上昇時はレジスタンスゾーンの重みが増します。 シグナル（オプション、デフォルト：テストマーカーON + RSIフィルタON） テストマーカー — 価格がゾーンにタッチしてリジェクション方向に引けると○が出現。ゾーンが機能していることを確認。デフォルトでRSIフィルタ付き（サポートは売られすぎ、レジスタンスは買われすぎでのみ発火）。 リテスト — ブレイク後にゾーンに戻って反応すると◆が出現。デフォルトOFF。 ゾーンリアクション — タッチ＆ホールドで小さい◆、ブレイク時にラベル。デフォルトOFF。 入力パラメータ ゾーン強度 — プリセット：Scalp / Local / Swing（デフォルト）/ Major / Custom。 カスタム設定 — 左バー、右バー、クラスター許容範囲（×ATR）、最小タッチ間隔、ピボット記憶数。 ゾーン — 片側最大数（デフォルト6）、最小タッチ数（デフォルト2）、フェード開始バー数、非表示距離（%）。 ブレイク済みゾーン — ブレイク表示、ドロップ表示。デフォルトOFF。 シグナル — テストマーカー（デフォルトON）、リテスト（OFF）、ゾーンリアクション（OFF）、RSIフィルタ（デフォルトON）、RSI設定、クールダウン、リテストウィンドウ。 ゴールド設定 — 心理的合流（$50/$100検出）、合流色、DXYアライメント。 統計テーブル — テーブル表示（デフォルトOFF）、位置、サイズ、文字色。アクティブS/R数、心理的合流数、DXY方向を表示。 スタイル — ボリューム色、ラベル表示、ボリュームスコア、ボリュームフォーマット、ゾーン透明度。 アラート — 9種類：レジスタンスタッチ/ブレイク、サポートタッチ/ブレイク、サポートテスト、レジスタンステスト、強気リテスト、弱気リテスト、新ピボット。 まとめ XAUUSD S/R Zonesは推測を測定に置き換えます。チャート上の全ゾーンにボリュームとリジェクションのデータがあります。強度ランキングが今最も重要なレベルを教えます。心理的価格帯の合流は、機関投資家のボリュームとゴールドの自然なラウンドナンバー構造が交わる場所をハイライトします。4つのプリセットでスキャルピングからスイングまでワンクリックで切替可能です。 推奨時間足：1分〜1時間（XAUUSD、低時間足ではScalpプリセット推奨） --- Based on Support and Resistance Zones by FeelsStrategy . 心理的価格帯の合流検出（ゴールドハイライト）、DXYアライメント、MatsukazeAlgoカラーパレット、統計テーブル、日英併記UI、ゴールド専用チューニングを追加。
Wskaźnik Pine Script®
od MatsukazeAlgo
Liquidity Pool Detector [EXCAVO]Equal High/Low Cluster Detection with Sweep Identification and Period Reference Levels The Liquidity Pool Detector identifies where resting orders accumulate near swing levels by detecting equal highs and equal lows using swing pivot analysis with ATR-based tolerance. When price wicks through a cluster level and closes back inside, the indicator marks a sweep - the moment orders at that level were filled and price reversed direction. This is not a basic pivot-high/low indicator. The cluster-merging logic groups nearby pivots into unified levels with touch counts, and the sweep filter distinguishes between a genuine zone test and a breakout continuation. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ ▸ HOW TO USE Step 1 → Add the indicator to the price chart. Red solid lines appear above price (equal highs clusters) and blue solid lines appear below price (equal lows clusters). Previous day and week H/L reference levels appear as slightly thicker dotted lines. Step 2 → Watch for sweep markers. "Highs Swept" appears on a bar where price wicked above an equal-highs cluster and closed back below it. "Lows Swept" appears below a bar where price wicked below equal lows and closed above. These bars indicate price tested and reversed from a cluster level. Step 3 → Read the touch count on each cluster label. "Highs ×3" means three swing highs formed at approximately the same level - a stronger cluster with a stronger level formed by more historical touches. Step 4 → Check the dashboard. Dist to High and Dist to Low show how many ATR units separate current price from the nearest cluster above and below. Values below 1.0 ATR highlight in orange - price is close to a level. Nearest High and Nearest Low show the exact price of those levels. Step 5 → Set up sweep alerts to receive notifications on bar close when a cluster level is tested and rejected. Use JSON Alerts for bot integration. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ ▸ HOW IT CALCULATES ◆ Swing Pivot Detection The indicator uses ta.pivothigh() and ta.pivotlow() with a configurable Swing Length (default 3). A pivot high is confirmed when the bar's high is the highest point among the surrounding N bars on each side - requiring N bars to the left and N bars to the right, so detection occurs N bars after the actual pivot forms. This lag ensures the pivot is fully confirmed and the value never changes after the bar closes. Lower Swing Length values (2-3) suit intraday timeframes; higher values (5) suit daily charts. ◆ Cluster Merging (ATR Tolerance) When a new confirmed pivot is detected, the indicator compares it against all existing clusters of the same type. If the distance between the new pivot and an existing cluster level is within the Equal Tolerance threshold (default 0.5 x ATR), the pivots are merged: the cluster level is updated to the weighted average of all touches, and the touch count increments. If no nearby cluster exists and the cluster limit has not been reached, a new cluster is created at that price level. This approach prevents visual noise from minor price variations between otherwise equal levels. ◆ Sweep Detection On each confirmed bar close, every active cluster is checked against two conditions. For equal-highs clusters: if the bar's high exceeded the cluster level AND the close is below the cluster level, a sweep is registered - price moved through the zone of resting orders and reversed. For equal-lows clusters: if the bar's low was below the cluster level AND the close is above it, a sweep is registered. A close through the level without reversal (close >= highs cluster, or close <= lows cluster) is treated as a breakout: the cluster is invalidated and removed without a sweep marker. ◆ Period Reference Levels Previous Day High/Low and Previous Week High/Low are fetched using request.security() with a confirmed-bar offset (high / low with barmerge.lookahead_on). These levels are included in the Nearest High and Nearest Low dashboard calculations alongside the detected equal-high/low clusters. ◆ Non-Repainting Design All cluster additions, sweep detections, and invalidations are gated on barstate.isconfirmed. No cluster is created and no sweep marker is placed until the bar closes. Pivot detection uses a right-bar offset that confirms the pivot on a fully closed bar. No value changes after a bar is confirmed. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ ▸ WHAT MAKES IT DIFFERENT ◆ ATR-Based Cluster Tolerance Most equal-high/low detectors use a fixed pip or percentage threshold that fails across different instruments and timeframes. Using ATR as the tolerance baseline means the same settings work on BTCUSD hourly (high ATR) and EURUSD daily (low ATR) without manual recalibration. The tolerance adapts to current market conditions automatically. ◆ Cluster Merging with Touch Count Instead of drawing a separate line for every swing pivot, nearby pivots are merged into a single cluster with an incrementing touch count. A cluster labeled "Highs ×3" represents three independent swing highs at the same level - a significantly stronger zone than a single untested level. The line and label update in place as new touches are added. ◆ Sweep vs Breakout Distinction The indicator explicitly separates sweep bars (wick through, close back inside) from breakout bars (close through the level). A sweep generates a "Highs Swept" or "Lows Swept" marker and an alert. A breakout silently removes the cluster. This distinction matters: sweeps are potential reversal setups; breakouts confirm continuation. ◆ Period Levels as Part of the Analysis Previous Day and Week H/L are integrated into the same framework as the equal-high/low clusters. They appear in the Nearest High/Low dashboard calculation and use the same color scheme as cluster lines, making them immediately readable alongside the dynamically detected clusters. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ ▸ DASHBOARD Compact panel showing current conditions: Dist to High - distance from current price to nearest cluster above, in ATR units; turns orange below 1.0 ATR Dist to Low - distance from current price to nearest cluster below, in ATR units; turns orange below 1.0 ATR Nearest High - exact price of the closest active cluster or period level above Nearest Low - exact price of the closest active cluster or period level below Last Sweep - most recent sweep type: Highs Swept, Lows Swept, or - (none) Swing - active swing length parameter Legend table (bottom left) explains cluster lines, period levels, and sweep markers. Both panels toggle in Dashboard settings. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ ▸ SETTINGS Detection Swing Length - 3 bars (pivot confirmation window left and right; use 2-3 for intraday, 5 for daily) Equal Tolerance (x ATR) - 0.5 (cluster merge radius as ATR multiple) Max Clusters - 10 (maximum active clusters tracked per direction) Max Display Distance (x ATR) - 5.0 (clusters beyond this ATR distance from price are hidden; detection continues) Period Levels Show Prev Day H/L - ON (previous day high and low reference lines) Show Prev Week H/L - ON (previous week high and low reference lines) Visualization Bull Color - default blue (equal-lows clusters and lows-swept markers) Bear Color - default red (equal-highs clusters and highs-swept markers) Sweep Color - default orange (sweep marker labels) Show Sweep Markers - ON (labeled markers on sweep bars) Background Highlight - OFF (subtle tint when price is within one ATR of nearest cluster) Alerts JSON Alerts - OFF (enable for bot integration) Dashboard Dashboard Position - Top Right Show Dashboard - ON Show Legend - ON ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ ▸ ALERTS Highs Swept - price wicked above equal-highs cluster and closed below on bar close Lows Swept - price wicked below equal-lows cluster and closed above on bar close Any Sweep - any cluster level tested and rejected on bar close ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ Best regards, EXCAVO Disclaimer Trading involves significant risk. This indicator is a technical analysis tool and does not constitute financial advice, investment recommendations, or a guarantee of future results. Past indicator behavior does not guarantee future performance. Always use proper risk management and your own judgment.
Wskaźnik Pine Script®
od EXCAVO
Support & Resistance LevelsSupport & Resistance Levels What is this indicator? Support & Resistance Levels is a technical analysis indicator for TradingView that automatically detects and draws key horizontal price levels based on moving average crossovers. Each time the fast moving average crosses the slow moving average, the indicator places a permanent horizontal line at the exact price where the two averages intersected. These levels represent critical moments where market momentum shifted direction. What does it use? The indicator is built on two configurable moving averages (fast and slow), available as SMA, EMA, or WMA with fully adjustable periods. By default it uses a 50-period MA and a 100-period MA, but these can be tuned to any timeframe or trading style. When the fast MA crosses above the slow MA (bullish crossover) or below it (bearish crossover), the exact intersection price is calculated as the average of both MA values at that bar, providing a geometrically precise level rather than using the candle close or open price. What is it for? This indicator serves as a dynamic support and resistance map built entirely from objective mathematical events — moving average crossovers — rather than subjective manual drawing. It is designed to be used as a contextual filter and confluence tool: traders can identify key price zones where the market has previously changed direction, and use those zones to plan entries, exits, stop losses, and take profit targets. It is particularly effective on intraday timeframes (5m, 15m, 1H) across Forex pairs, indices, and crypto assets, where price tends to revisit previous crossover zones repeatedly before continuing in either direction. Why are the lines so important? The horizontal lines generated by this indicator are not arbitrary — they mark the exact price at which market momentum previously reversed. This makes them meaningful levels of memory: the market has a documented tendency to react at prices where significant directional changes occurred. When multiple lines cluster in a narrow price zone, they form a high-confluence area where the probability of a support or resistance reaction is significantly higher. A single line represents one crossover event; a cluster of two or three lines in the same zone represents a historically defended price area that the market has respected across multiple different momentum shifts. Lines drawn from bullish crossovers tend to act as support on subsequent retests, while lines from bearish crossovers tend to act as resistance. Once broken, these levels frequently flip role — a former support becomes resistance and vice versa, following the classic principle of polarity in technical analysis. How to use it 1. Add the indicator to any chart and timeframe. 2. Adjust the fast and slow MA periods to match your trading style (shorter periods for scalping, longer for swing trading). 3. Watch how price reacts when it approaches a horizontal line — especially when two or more lines are clustered together. 4. Use the lines as confluence with your existing strategy: entries at key levels, stops beyond them, targets at the next level. 5. For multi-timeframe confluence, add the indicator twice with different MA settings — levels that appear on both are the strongest. Soportes y Resistencias ¿Qué es este indicador? Support & Resistance Levels es un indicador de análisis técnico para TradingView que detecta y dibuja automáticamente niveles horizontales de precio clave basados en cruces de medias móviles. Cada vez que la media móvil rápida cruza a la media móvil lenta, el indicador coloca una línea horizontal permanente en el precio exacto donde las dos medias se intersectaron. Estos niveles representan momentos críticos en los que el momentum del mercado cambió de dirección. ¿Qué utiliza? El indicador se basa en dos medias móviles configurables (rápida y lenta), disponibles como SMA, EMA o WMA con períodos totalmente ajustables. Por defecto utiliza una MA de 50 períodos y una MA de 100 períodos, aunque pueden adaptarse a cualquier marco temporal o estilo de trading. Cuando la MA rápida cruza por encima de la lenta (cruce alcista) o por debajo (cruce bajista), el precio exacto de intersección se calcula como la media de ambas MAs en esa barra, proporcionando un nivel geométricamente preciso en lugar de usar el precio de cierre o apertura de la vela. ¿Para qué sirve? Este indicador funciona como un mapa dinámico de soportes y resistencias construido a partir de eventos matemáticos objetivos — cruces de medias móviles — en lugar de trazados subjetivos manuales. Está diseñado para usarse como filtro contextual y herramienta de confluencia: los traders pueden identificar zonas de precio clave donde el mercado ya ha cambiado de dirección anteriormente, y usar esas zonas para planificar entradas, salidas, stop losses y objetivos de beneficio. Es especialmente efectivo en marcos temporales intradía (5m, 15m, 1H) en pares de Forex, índices y criptomonedas, donde el precio tiende a revisitar repetidamente las zonas de cruce anteriores antes de continuar en cualquier dirección. ¿Por qué son tan importantes las líneas? Las líneas horizontales generadas por este indicador no son arbitrarias: marcan el precio exacto en el que el momentum del mercado se invirtió anteriormente. Esto las convierte en niveles de memoria significativos: el mercado tiene una tendencia documentada a reaccionar en precios donde se produjeron cambios direccionales importantes. Cuando varias líneas se agrupan en una zona de precio estrecha, forman un área de alta confluencia donde la probabilidad de una reacción de soporte o resistencia es significativamente mayor. Una sola línea representa un evento de cruce; un grupo de dos o tres líneas en la misma zona representa un área de precio históricamente defendida que el mercado ha respetado en múltiples cambios de momentum. Las líneas trazadas desde cruces alcistas tienden a actuar como soporte en retesteos posteriores, mientras que las líneas de cruces bajistas tienden a actuar como resistencia. Una vez rotas, estos niveles frecuentemente invierten su papel: un antiguo soporte se convierte en resistencia y viceversa, siguiendo el principio clásico de polaridad en análisis técnico. Cómo usarlo 1. Añade el indicador a cualquier gráfico y marco temporal. 2. Ajusta los períodos de la MA rápida y lenta según tu estilo de trading (períodos más cortos para scalping, más largos para swing trading). 3. Observa cómo reacciona el precio cuando se acerca a una línea horizontal, especialmente cuando hay dos o más líneas agrupadas. 4. Usa las líneas como confluencia con tu estrategia existente: entradas en niveles clave, stops más allá de ellos, objetivos en el siguiente nivel. 5. Para confluencia multitemporal, añade el indicador dos veces con diferentes configuraciones de MA: los niveles que aparezcan en ambos son los más fuertes.
Wskaźnik Pine Script®
od BullBearSR
key level -she tradesDescription: key level -she trades is a professional-grade technical analysis tool designed to identify high-probability institutional zones based on mathematical price ranges. This indicator divides a user-defined price range into 8 precise "Octave" levels, helping traders visualize where price is likely to react, reverse, or consolidate. 🚀 Key Features: Mathematical Precision: Automatically calculates 7 internal levels between your chosen High and Low prices using a balanced step logic (Gann/Murray Math style). Dynamic Touch Detection: A unique visual feedback system where lines change color (Gold) and thickness in real-time when the price touches a key level. Institutional Color Coding: Black: Major structure boundaries (Top Range, Pivot Point, and Bottom Range). Red (Neon): Premium Sell Zones for potential reversals or supply entries. Blue (Neon): Discount Buy Zones for potential long entries or demand clusters. Pro UI/UX: Clean, non-cluttering labels that display the exact price of each level for fast decision-making. Smart Alerts: Built-in alert system to notify you the moment the price hits the Pivot Point or the extreme Buy/Sell zones. 📈 How to Use: Identify the Range: Find a significant high and low on your current timeframe. Input Prices: Enter these values into the indicator settings. Execute: Look for Sell setups in the Red Zones. Look for Buy setups in the Blue Zones. Use the Black Pivot as a target or a trend-bias confirmation. Perfect For: Scalpers looking for quick rejections. Day traders identifying intraday ranges. Price Action traders who need clean, mathematical levels.
Wskaźnik Pine Script®
od cutie_life
2
Breakout Retest Readiness [AGPro Series]Breakout Retest Readiness 🧠 Core Idea Is the post-breakout retest being accepted with structure, or is the breakout losing quality at the risk edge? 📌 Overview / What it does Breakout Retest Readiness is a chart-first planning tool built to evaluate what happens after a confirmed breakout and after price starts interacting with the retest pocket. The script maps the broken structure level, builds a retest pocket around it, places a risk-edge shelf beyond the pocket, and projects a target-room guide for context. It then scores the active retest environment with a 0-100 Acceptance Score and displays a clear next-action state in the AG Pro panel. This script does not predict continuation. It does not automate entries. It is designed to organize post-breakout retest context so traders can review acceptance, rejection, risk edge, and plan quality in a cleaner way. 🎯 Purpose & Design Philosophy Most breakout tools focus on the moment price crosses a level. In practice, many useful decisions happen after the break, when price returns toward the broken level and either accepts it or fails around it. This script was built for traders who want a structured retest planning layer rather than another basic breakout marker. It supports a patient workflow: wait for structure, observe the pocket, evaluate acceptance, and review risk before reacting. The design philosophy is simple: the chart should answer what state the retest is in, how strong the acceptance context is, where risk is being tested, and what the next review step should be. ⚡ Why This Script Is Different Most tools focus on detecting a breakout or grading the first retest as a standalone signal. This script does NOT try to clone a classic break-retest quality grader, and it does not print simple buy or sell commands. Instead, it works as a post-breakout readiness planner. It arms a retest pocket after a confirmed breakout, waits for price to interact with that pocket, evaluates acceptance versus rejection, tracks the risk edge, and keeps the next-action state visible in the panel. The difference is the decision layer. The script is less about saying "a retest happened" and more about answering whether the active retest environment is constructive enough to keep reviewing. ⚙️ Methodology 1. Context Detection The script identifies a confirmed break beyond recent structure using a prior high or prior low reference. The breakout must clear the structure by an ATR-normalized buffer so minor pokes are filtered. 2. Reference Mapping After a valid break, the script stores the breakout line, builds a retest pocket around it, places an invalidation shelf beyond the broken level, and projects a target-room guide from the prior structure range. 3. Reaction Evaluation When price interacts with the retest pocket, the script evaluates breakout quality, retest depth, wick rejection, volume change, and trend agreement. These components combine into a 0-100 Acceptance Score. 4. Visual Output The chart shows the active retest pocket, breakout line, risk edge, target guide, compact event labels, and the AG Pro panel. The panel summarizes retest state, acceptance score, breakout quality, risk edge, and action. 🗺️ How to Read the Chart Retest Pocket = the zone around the broken structure level where price is being evaluated after the breakout. Breakout Line = the structure level that was crossed and now anchors the retest plan. Risk Edge = the invalidation shelf beyond the retest pocket. It is a planning reference, not a stop recommendation. Target Guide = a target-room marker projected from the prior range. It is context only, not a forecast. Labels = compact state markers such as ARMED, TEST, ACCEPT, REJECT, RISK EDGE, or EXPIRE. Colors = bullish retest plans use the AGPro teal tone, bearish plans use the AGPro pink tone, watch states use indigo or amber, and risk conditions use red. Panel = the main decision interface showing retest state, acceptance score, breakout quality, risk edge, and next action. 🚦 Signals & States • Breakout Armed → a breakout retest plan has been created after price cleared structure. • Testing Pocket → price is interacting with the active retest pocket and acceptance is being evaluated. • Accepted Retest → the retest has held the pocket with enough acceptance quality to deserve review. • Rejected Retest → the retest has failed around the pocket and quality has weakened. • Risk Edge Hit → price has moved beyond the mapped risk shelf. • Expired → the retest window aged out before a constructive interaction. 🔔 Alerts Logic Alerts are available for breakout plan arming, retest pocket interaction, accepted retest readiness, rejected retest or risk-edge pressure, and expired retest plans. Each alert is an attention marker. Alerts do not represent trade instructions, guaranteed outcomes, or automated strategy decisions. 🧩 Confluence Logic The strongest acceptance context appears when the breakout quality, retest depth, wick rejection, volume behavior, and trend agreement support the same side. When these components align, the retest score improves. When the pocket is too deep, volume behavior is poor, trend context disagrees, or the risk edge is pressured, the readiness state weakens. 📊 When to Use • After clean breakouts from recent structure • During trend continuation review • When price returns toward a broken level • When the trader wants to separate constructive retests from weak post-break reactions • On liquid symbols where structure, volume, and candle behavior are readable ⚠️ When NOT to Use • Extremely low-liquidity instruments • Highly noisy lower timeframes • News-driven volatility spikes • Markets with no clear structure reference • Situations where the breakout level is too close to major external obstruction 🎛️ Key Inputs • Breakout Structure Lookback → controls the prior structure reference used for breakout detection. • Maximum Bars To Retest → controls how long the script waits for the retest pocket to matter. • Sensitivity → adjusts how strict the breakout and acceptance model should be. • Minimum Acceptance Score → defines the score needed before accepted readiness can appear. • Retest Pocket Width ATR → controls the width of the post-breakout pocket. • Invalidation Shelf ATR → controls the mapped risk-edge distance beyond the broken level. • Target Guide Range Multiple → controls the forward target-room guide. • Visual Settings → control pockets, lines, labels, label density, label size, and forward rendering. • Panel Settings → control panel visibility, location, theme, and font size. 🖥️ Interface & Visual Design The interface is built around a clean AG Pro panel and one main chart object family: the retest pocket. The pocket label is centered inside the zone so the active state is visible without needing extra clutter. The breakout line, invalidation shelf, and target guide create a simple visual hierarchy: level, risk, and room. Labels are intentionally compact and controlled by cooldown and maximum-visible settings so the chart remains active without becoming crowded. 🧪 Practical Usage Workflow 1. Read the panel state. 2. Locate the active retest pocket. 3. Check whether price is testing, accepting, rejecting, or pressing the risk edge. 4. Compare the Acceptance Score with the breakout quality. 5. Use the action row as a review prompt, not as an instruction. 🔍 Interpretation Guidelines The Acceptance Score should be read as context quality, not certainty. A higher score means the current retest has cleaner structural behavior under the script's rules. A lower score means the retest is less constructive, too deep, poorly supported, or not aligned with trend context. The Risk Edge matters because a retest can look acceptable for a few bars and still lose structure if price pushes beyond the invalidation shelf. The panel keeps that condition visible. 🚫 What This Script Is NOT This script is not a prediction engine. This script is not financial advice. This script is not an auto-trading system. This script does not provide guaranteed signals. This script is not a generic support and resistance map. This script is not a clone of a first-retest grading tool. ⚠️ Limitations & Transparency The script is rule-based and depends on the selected lookback, timeframe, and market structure. Different symbols can produce different retest behavior. Lower timeframes may show more noise. Higher timeframes may produce fewer but stronger events. Volatility changes can affect pocket size, risk-edge distance, and event frequency. Users should interpret every output within broader market context. 🧠 Market Context Notes Breakout retests are most useful when structure is clear, liquidity is sufficient, and price has enough room to continue without immediate obstruction. Volume behavior can add context, but volume data quality varies across markets. When volume is unreliable, the script treats that component more neutrally. The retest pocket is not a guaranteed support or resistance zone. It is a structured review area around the broken level. 🧾 Use Case Examples When price breaks above recent structure and later returns to the pocket with a controlled pullback, the script can mark the retest as Testing Pocket or Accepted Retest depending on score quality. When price breaks below structure but quickly pushes back above the pocket and pressures the mapped risk edge, the script can mark rejection or risk-edge pressure. When a breakout never returns to the pocket within the selected time window, the script can expire the plan instead of keeping old context alive. 🧱 System Philosophy AGPro tools are designed to support structured chart reading. The goal is not to add more random signals, but to turn market behavior into clearer states, cleaner context, and better review discipline. Breakout Retest Readiness follows that philosophy by turning a common post-breakout question into a visible planning workflow. 🔐 Non-Promise Statement No script can confirm future price direction with certainty. This tool organizes retest context. It does not promise continuation, reversal, profit, or accuracy. 📉 Risk Disclosure Trading involves risk. All outputs from this script are educational and analytical in nature. Users are responsible for their own decisions, risk management, position sizing, and market interpretation. This script does not provide financial advice. 📚 Educational Note Use the script to study how breakouts behave after price returns to the broken level. The most useful insight is often not the breakout itself, but how the market reacts when the level is tested again.
Wskaźnik Pine Script®
od AGProLabs
Reward Room Analyzer [AGPro Series]Reward Room Analyzer 🧠 Core Idea Does the chart offer enough clean reward room before the next major obstacle? 📌 Overview / What it does Reward Room Analyzer is a chart-overlay planning tool designed to evaluate whether the current price area has enough practical space before the next meaningful obstacle. Instead of projecting a take-profit ladder or calculating position size, the script studies the distance from current price to the nearest target-side obstacle, the opposite invalidation reference, room-to-risk ratio, trend support, clean-air structure, and volatility fit. These inputs are converted into a 0-100 Reward Room Score with a clear state such as Open Room, Watch Room, Thin Room, Blocked Path, Risk Heavy, or No Room. The script produces a forward reward room corridor, nearest obstacle rail, invalidation reference rail, compact chart labels, alert conditions, and a clean AGPro planning panel. It does not predict price movement, automate execution, or promise that any target will be reached. 🎯 Purpose & Design Philosophy This script was built to solve a common planning problem: a setup can look attractive, but the path ahead may already be blocked by nearby structure, poor room-to-risk, or excessive invalidation distance. Reward Room Analyzer helps traders review the quality of the space ahead before treating a setup as actionable. It supports a planner mindset: check the available room, identify the obstacle, compare room against risk, and then decide whether the chart deserves more attention. It is designed for traders who care about trade planning, target path quality, risk awareness, and cleaner decision structure rather than another generic signal marker. ⚡ Why This Script Is Different Most tools focus on drawing take-profit levels, R-multiple ladders, Fibonacci extensions, or basic risk/reward boxes. This script does NOT build a TP ladder, position-size calculator, profit tracker, or entry signal system. Instead, it asks a narrower decision question: is there enough clean reward room before the next obstacle, or is the path already too thin, blocked, or risk-heavy? ⚙️ Methodology 1. Context Detection The script selects the active target side using Auto Side, Long Room, or Short Room. Auto Side weighs trend support and available room. 2. Reference Mapping It maps confirmed obstacle pivots, the nearest target-side rail, the opposite invalidation reference, and ATR-normalized reward room. 3. Reaction Evaluation It scores the room using distance to obstacle, room-to-risk ratio, clean-air structure, trend agreement, risk distance, and volatility fit. 4. Visual Output It displays the active reward corridor, centered corridor label, obstacle/invalidation rails, compact labels, alerts, and an AGPro panel. 🗺️ How to Read the Chart Reward Room Corridor = the forward space between current price and the nearest target-side obstacle. Nearest Obstacle Rail = the first meaningful structural barrier in the selected target direction. Invalidation Reference = the opposite-side reference used to estimate risk distance. Labels = compact state markers showing the current reward-room condition and score. Colors = teal and indigo suggest stronger room quality, amber suggests caution, and pink/red suggests weak or blocked room. Panel = summarizes reward score, reward room, obstacle, room-to-risk, target side, and next action. 🚦 Signals & States • Open Room → reward room is wide enough, room-to-risk is acceptable, and risk is not excessive. • Watch Room → context is acceptable but not strong enough for the open-room state. • Thin Room → the nearest obstacle is too close. • Blocked Path → room-to-risk is weak relative to the invalidation reference. • Risk Heavy → invalidation distance is too large compared with the available room. • No Room → conditions are not strong enough for planning attention. 🔔 Alerts Logic • Open Reward Room → triggers when the script enters the Open Room state. • Watch Reward Room → triggers when watchable room appears without reaching Open Room. • Blocked Reward Path → triggers when room-to-risk becomes structurally blocked. • Thin Reward Room → triggers when the nearest obstacle is too close. • Risk Heavy Room → triggers when invalidation distance is heavy relative to room. Alerts are attention markers. They are not trade instructions. 🧩 Confluence Logic Reward room quality improves when the target-side distance, room-to-risk ratio, clean-air structure, trend agreement, balanced risk distance, and stable volatility align. The strongest read appears when the corridor is visibly open and the panel confirms sufficient room with a strong score.
Wskaźnik Pine Script®
od AGProLabs
Parabolic SAR Flip Quality [AGPro Series]Parabolic SAR Flip Quality 🧠 Core Idea Is this Parabolic SAR flip strong enough to plan around, or is it just another noisy stop-and-reverse signal? 📌 Overview / What it does Parabolic SAR Flip Quality is a planner-style Parabolic SAR overlay built to evaluate PSAR flip conditions as trade-decision context, not as simple directional signals. The script keeps the classic Parabolic SAR dot trail visible, then adds a professional quality model that measures flip strength, trend alignment, SAR distance, candle efficiency, volatility expansion, and prior-leg maturity. The result is a clear 0-100 readiness score that helps traders judge whether the current PSAR flip environment is valid, weak, developing, or blocked. It produces qualified flip labels, SAR dots, a SAR-native protection band, and a compact AGPro panel showing Flip Side, SAR Distance, Trend Filter, and Quality Score. It does not automate trades, predict future price, or tell users what to buy or sell. It organizes PSAR flip context into a cleaner decision framework. 🎯 Purpose & Design Philosophy Most Parabolic SAR tools show where the SAR dots are and where the stop-and-reverse event happened. That is useful, but it often leaves the trader with the harder question: is this flip actually good enough to act on, monitor, or ignore? This script was built to fill that gap. It turns a classic indicator into a structured decision engine by asking whether the flip has enough distance, trend support, expansion, and maturity behind it. The design supports traders who want cleaner execution readiness, not more noise. It is built for chart readers who want to evaluate setup quality, risk area, invalidation context, and next-action state before making their own decision. ⚡ Why This Script Is Different Most tools focus on printing every Parabolic SAR flip as if all flips have similar meaning. This script does NOT treat a dot-side change as a complete setup. It also does not turn PSAR into a generic signal board or a generic support/resistance zone map. Instead, it evaluates the flip as a planning event. The script scores the quality of the transition, checks whether trend conditions support the new side, measures how far price is from the SAR reference, and projects a SAR Protection Band that represents the stop-defense area created by the qualified flip. The difference is the decision layer: • Is the flip valid? • How strong is it? • Where is the SAR-based invalidation area? • Is the trend filter helping or blocking the setup? • What is the current read now? ⚙️ Methodology 1. Context Detection The script detects whether price is currently operating on the bullish or bearish side of the Parabolic SAR. It also tracks raw SAR flips and measures how mature the prior SAR leg was before the transition. 2. Reference Mapping The active SAR value becomes the primary reference point. Distance from SAR is normalized by ATR so the read adapts across symbols and timeframes. 3. Reaction Evaluation Each flip is evaluated through a multi-factor quality model: • SAR distance versus ATR • EMA trend alignment • EMA slope direction • DMI directional agreement • ADX trend strength • Candle body efficiency • Range expansion • Prior-leg maturity These conditions are combined into a 0-100 Quality Score. 4. Visual Output When a flip passes the quality threshold, trend filter, SAR distance requirement, confirmation setting, and cooldown control, the script promotes it into a qualified chart label. It can also draw a SAR Protection Band around the flip's SAR reference for forward context. 🗺️ How to Read the Chart SAR dots show the classic Parabolic SAR trail. Bullish dots appear below price, and bearish dots appear above price. Qualified flip labels mark PSAR flips that passed the quality and trend conditions. The label includes the flip side and the quality score, allowing quick comparison between stronger and weaker transitions. The SAR Protection Band represents the PSAR-based stop-defense area created after a qualified flip. It is not a generic support/resistance zone. It is a SAR-native invalidation and planning reference. Colors follow the AGPro visual language: • Teal = bullish side or bullish qualified flip • Pink = bearish side or bearish qualified flip • Gold = neutral, blocked, or caution state • Indigo = trend backbone reference The panel summarizes the active read: • Flip Side • SAR Distance • Trend Filter • Quality Score 🚦 Signals & States • Bullish Flip → A qualified PSAR transition to the bullish side. • Bearish Flip → A qualified PSAR transition to the bearish side. • Trend Filter PASS → The broader trend filter agrees with the current SAR side. • Trend Filter BLOCKED → The SAR side is active, but the broader trend filter does not fully support it. • High Quality Score → The flip has stronger alignment across distance, trend, expansion, efficiency, and maturity. • WAIT Grade → The current condition does not meet the preferred readiness profile. These are analytical states, not trade instructions. 🔔 Alerts Logic Alerts trigger only when a qualified bullish or bearish PSAR flip is confirmed by the script's quality rules. • Qualified Bullish PSAR Flip → A bullish SAR flip passed the trend filter, quality threshold, SAR distance threshold, cooldown rule, and confirmation setting. • Qualified Bearish PSAR Flip → A bearish SAR flip passed the trend filter, quality threshold, SAR distance threshold, cooldown rule, and confirmation setting. Alerts are attention markers. They are not automated trading instructions and do not guarantee future movement. 🧩 Confluence Logic The strongest context appears when several conditions align at the same time: • PSAR flips to a new side • Price has enough ATR-normalized distance from SAR • EMA trend direction supports the flip • DMI confirms directional pressure • ADX shows enough trend strength • Candle structure shows real expansion • The previous SAR leg was mature enough When these elements align, the flip becomes more useful as a planning reference. 📊 When to Use This script is best suited for: • Trending markets where SAR transitions can develop into continuation phases • Swing-trading review on higher timeframes • Crypto, forex, stocks, indices, and commodities with enough liquidity • PSAR users who want a readiness score instead of raw dot flips • Traders who want a cleaner invalidation reference around qualified SAR flips • Multi-timeframe analysis where the user wants to compare flip quality across chart periods ⚠️ When NOT to Use This script is less useful in: • Very low-liquidity markets • Extremely noisy sideways chop • News-driven spikes where ATR and structure can distort quickly • Ultra-low timeframes with unstable spread or poor execution quality • Markets where price repeatedly flips around the SAR without trend expansion In these conditions, raw PSAR flips and quality labels can become less reliable as planning references. 🎛️ Key Inputs • SAR Start → Controls the initial Parabolic SAR acceleration factor. • SAR Increment → Controls how quickly the SAR acceleration increases as the trend develops. • SAR Maximum → Controls the maximum SAR acceleration level. • Trend EMA Length → Defines the trend backbone used by the filter. • DMI Length and ADX Smoothing → Control directional pressure and trend-strength measurement. • Minimum ADX → Sets the required trend-strength floor. • Minimum Quality Score → Defines how selective qualified flip labels should be. • Minimum SAR Distance ATR → Blocks cramped flips that occur too close to the SAR reference. • Prior Leg Maturity Bars → Requires the prior SAR leg to have enough development before a flip receives full maturity credit. • Flip Cooldown Bars → Controls label density and keeps the chart readable. • SAR Protection Band settings → Control the width, forward projection, and maximum active bands. • Panel and Label Font Size → Adjust visual readability, with Normal as the default. • Panel Location and Theme → Control the AGPro panel placement and appearance. 🖥️ Interface & Visual Design The interface is designed to be premium, compact, and decision-focused. The chart keeps the classic PSAR dots as the main visual anchor. Qualified labels appear only when the flip passes the selected filters. The SAR Protection Band is transparent and restrained so it adds planning context without overwhelming candles. The AGPro panel uses a single merged blue header row with the script name, followed by a clean four-row readout. Its purpose is to summarize the current decision state without turning the chart into a dashboard-heavy layout. 🧪 Practical Usage Workflow 1. Read the panel. Check the active Flip Side, SAR Distance, Trend Filter, and Quality Score. 2. Check the latest qualified label. Compare the quality score with the minimum threshold and with prior labels on the chart. 3. Review the SAR Protection Band. Use the band as a SAR-native planning reference for where the qualified flip should remain structurally defended. 4. Confirm broader context. Compare the flip with trend direction, volatility, market structure, and timeframe behavior. 5. Decide independently. Use the output as structured context, not as an automatic trade command. 🔍 Interpretation Guidelines A strong read usually has a qualified flip label, a passing trend filter, enough SAR distance, and a higher quality grade. A weaker read may show an active SAR side but a blocked trend filter or a low score. This means the SAR state exists, but the planning context is not strong enough under the script's model. The SAR Protection Band should be interpreted as a stop-defense and invalidation reference. If price respects it, the flip context remains cleaner. If price violates it, the qualified flip has lost part of its structural value. The best use of the script is comparison: compare current flip quality against previous flips, across timeframes, and across market conditions. 🚫 What This Script Is NOT This script is not a prediction engine. It is not financial advice. It is not an auto-trading system. It does not guarantee profitable signals. It does not replace independent analysis, position sizing, risk management, or broader market context. ⚠️ Limitations & Transparency Parabolic SAR is a trend-following concept, so it can struggle in choppy or directionless markets. Quality scoring improves structure, but it cannot remove all false transitions. Timeframe selection, volatility regime, liquidity, and market session can affect how signals appear and how useful the SAR Protection Band becomes. The script is rule-based and transparent. It reads current and historical chart data according to the selected inputs. It does not know future price behavior. 🧠 Market Context Notes PSAR flips tend to become more meaningful when they occur with volatility expansion, directional pressure, and enough distance from the SAR reference. In compressed markets, the dots may switch sides more frequently and the score may change quickly. In stronger trends, the SAR dots often create cleaner trailing structure, and qualified flips can become more useful as planning events. The best interpretation comes from combining the panel state, SAR distance, label quality, protection band behavior, and the broader market environment. 🧾 Use Case Examples When price flips bullish, the trend filter passes, SAR distance expands above the minimum threshold, and the quality score is high, the user can treat that area as a cleaner bullish planning context. When price flips bearish but the trend filter is blocked, the script communicates caution. The SAR side changed, but the broader read is not aligned. When price returns to the SAR Protection Band after a qualified flip, the user can monitor whether the band is respected or violated as part of the invalidation read. 🧱 System Philosophy The purpose of this script is not to add another signal to the chart. The purpose is to turn a classic indicator into a decision-support framework: • Setup validity • Quality strength • Trend agreement • Risk reference • Invalidation context • Current action state This is the AGPro direction: tools that help traders make better decisions, not tools that simply decorate the chart with more signals. 🔐 Non-Promise Statement No indicator can provide certainty. This script does not promise future outcomes, guaranteed performance, or risk-free execution. Its role is to organize Parabolic SAR flip context into a clearer analytical structure. 📉 Risk Disclosure Trading involves risk, and market conditions can change quickly. This script is provided for educational and analytical purposes only. It does not provide financial advice, investment advice, or guaranteed trading outcomes. Users are responsible for their own analysis, decisions, risk management, and trading results. 📚 Educational Note Parabolic SAR is one of the most recognized stop-and-reverse indicators because it makes trend state visually simple. This script keeps that visual simplicity while adding a quality and planning layer so users can study which flips deserve more attention and which ones should remain secondary context.
Wskaźnik Pine Script®
od AGProLabs
SuperTrend Flip Zones [AGPro Series]# SuperTrend Flip Zones 🔷 OVERVIEW SuperTrend Flip Zones is a trend-following overlay designed for traders who appreciate the clarity of SuperTrend, but want a more selective and more structured version of it on the chart. Traditional SuperTrend tools are popular because they are simple: the line flips, the color changes, and the chart immediately prints a directional signal. That simplicity is useful, but it also creates a familiar weakness. In many market conditions, raw SuperTrend flips can appear too early, too close to noise, or without enough expansion to show that a genuine directional transition is taking hold. This script was built to solve that exact problem. Instead of treating every SuperTrend direction change as equally meaningful, SuperTrend Flip Zones evaluates the quality of the flip itself. Only qualified flips are promoted into visible BUY / SELL events, and each accepted signal creates a forward-projecting support or resistance zone built around the new SuperTrend structure. The result is not just another SuperTrend clone with different colors. It is a more selective, more chart-aware framework that helps traders judge whether a flip is worth paying attention to, and where the new trend should continue to defend itself after that flip occurs. 🔷 WHAT MAKES THIS DIFFERENT The biggest difference is that this script does not stop at the flip. Most SuperTrend indicators on the platform focus on one task only: detect the directional switch and mark it immediately. SuperTrend Flip Zones takes a broader view. It asks two additional questions: 1. Was the flip strong enough to deserve attention? 2. After the flip, where is the live structural zone that the new trend is expected to protect? That design choice creates a very different chart experience. Instead of receiving every mechanical transition equally, the user sees a filtered signal environment. Weak flips can be ignored, while stronger flips remain visible and are reinforced by an ATR-based zone that extends forward. This makes the tool useful not only at the exact moment of the flip, but also in the bars that follow, when traders are deciding whether the move is still being respected. It also creates clear separation from other AGProLabs tools in the same family. This is not a pullback-quality script. It is not focused on grading retracements inside an already established trend. It is focused on the transition point itself, and on the acceptance zone created by that transition. 🔷 CORE LOGIC The script is built around a custom SuperTrend engine using the selected ATR model, source, and multiplier. When the direction flips, the script does not blindly trust the event. The flip is scored through a multi-factor quality model that examines: - candle body efficiency, - range expansion relative to ATR, - price separation from the active SuperTrend line, - alignment with a trend EMA, - maturity of the prior trend leg before the reversal occurred. Only flips that meet the minimum quality threshold are accepted. Once a bullish or bearish flip qualifies: - a BUY or SELL signal is printed, - the signal can be promoted to BUY+ or SELL+ when the score is stronger, - a rectangular support or resistance zone is created around the new SuperTrend level, - that zone is extended forward to provide ongoing structure. This makes the indicator useful both as a signal filter and as a post-signal map. 🔷 WHY THE ZONES MATTER A standard SuperTrend line tells you where the trailing stop or directional boundary currently sits. This script adds another layer by converting qualified flips into live zones. Those zones are important because they help visualize where the market should continue to accept price if the new directional phase is healthy. In bullish conditions, the zone behaves like a dynamic support belt around the fresh SuperTrend structure. In bearish conditions, the zone behaves like a dynamic resistance belt. If price continues to respect that zone, the flip remains structurally valid. If price loses the zone, the chart communicates that the new directional state is weakening or failing. This produces a more practical read than a line alone, especially for traders who do not always enter on the exact signal bar and instead evaluate continuation quality after the move begins. 🔷 VISUAL DESIGN The script is designed to look polished and organized without overloading the chart. Visual elements include: - bullish and bearish SuperTrend line states, - restrained BUY / SELL labels, - right-extending flip zones, - soft trend cloud for directional context, - compact AGPro panel with merged header row, - configurable panel placement, - dark and light theme support, - adjustable label and panel text sizing. The goal is to keep the chart premium and readable rather than dense and noisy. 🔷 HOW TO USE IT SuperTrend Flip Zones is most useful for traders who want a higher-quality directional read rather than every raw SuperTrend crossover. A typical workflow is: - use the line and cloud to identify the active directional state, - wait for a qualified BUY or SELL rather than reacting to every raw flip, - monitor the projected zone as a live support or resistance area, - observe whether price continues to defend that zone or loses it. This makes the script suitable for discretionary trend-following, continuation analysis, and cleaner overlay-based chart reading. 🔷 BEST FIT This tool is especially useful for: - traders who already use SuperTrend but want cleaner signal selection, - traders who prefer support / resistance style context after the flip, - users who want a premium visual overlay without excessive label density, - trend traders who want a more selective buy sell workflow. 🔷 TRANSPARENCY This is an analytical indicator, not a trading strategy. Like all trend-following tools, it can become less effective in highly compressed or directionless market conditions. The filtering logic is designed to reduce weak transitions, but it does not replace chart context, timeframe awareness, or risk management. All logic is based on confirmed bar data inside the script framework. The purpose is to organize price action more clearly, not to guarantee future market behavior.
Wskaźnik Pine Script®
od AGProLabs
Pivot Channel Map [AGPro Series]Pivot Channel Map 🔹 OVERVIEW Pivot Channel Map is a structural channel engine that automatically detects and classifies market structure channels from confirmed swing pivots. It organises every qualified channel into a clear 8-family taxonomy (Major / Minor × External / Internal × Up / Down) and renders them as a living map of trend, range and reversal context. The script works on all instruments and timeframes, with a focus on intraday and swing analysis. Instead of plotting a single trendline or band, the engine maintains a continuously updated structural map: active channels, their midlines, interaction pockets around the rails, preserved broken channels, and post-break retest / reclaim signals. A compact right-corner panel summarises live channel counts, qualification state, nearest channel distance in ATR units, and the prevailing Major tilt. The goal is to give discretionary traders a moderation-safe, clutter-controlled view of where price is inside the broader structure — not to predict future prices. 🔸 UNIQUE EDGE Most channel indicators draw one or two parallel lines and call it a day. Pivot Channel Map adds structural classification, qualification, memory and post-event follow-through on top of the channel geometry: - Eight channel families instead of a single pair of rails - ATR-normalised qualification engine (Off / Balanced / Strict) to filter structurally weak channels - Broken Channel Memory that preserves invalidated structure as faded historical context - Interaction Zones (right-edge ATR pockets) around active channel rails - Post-Break Retest / Reclaim tracker that tags the first valid touch after a confirmed break - Break and React event markers on Major channels - ATR-based distance tagging in the info panel (Near / Mid / Wide / Far) The result is a richer structural read than a standard channel script, while still staying visually clean through emphasis, opacity and clutter controls. 🔹 METHODOLOGY 1. Pivot detection. A configurable Pivot Period drives ta.pivothigh and ta.pivotlow to produce confirmed swing pivots. The script then classifies each pivot into H / HH / LH / HL / LL / L roles and promotes / demotes them between Major (M*) and Minor (m*) status based on close breaks versus the current Major range. 2. Channel construction. From the classified pivot stream, eight channel families are built: - Major External Up / Down - Major Internal Up / Down - Minor External Up / Down - Minor Internal Up / Down External channels trace structural HH/LL extremes, Internal channels trace LH/HL interior swings. 3. Qualification. Each candidate channel is width-measured against ATR and span-measured in bars. The Qualification Engine (Off / Balanced / Strict) filters out structurally weak channels before they are drawn. 4. Life-cycle management. Active channels are redrawn and extended forward each bar until an origin-rail or channel-rail break is confirmed. On break, the previous structure can be preserved by Broken Channel Memory (Off / Major Only / All) with its own style and opacity. 5. Event detection. Confirmed origin-rail breaks produce BREAK events; wick-through-then-close-back moves produce REACT events on Major channels. A cooldown and an ATR-based price-distance filter prevent label clusters when price oscillates around the same rail. 6. Post-break follow-through. After a confirmed break, the script tracks the first valid touch inside a configurable window and tags it as RETEST (channel-rail break) or RECLAIM (origin-rail break). 🔸 SIGNALS & ALERTS On-chart events: - BREAK — confirmed close-based break of a Major channel rail - REACT — wick through the Major rail with a close back inside, filtered by bar cooldown and ATR distance - RETEST / RECLAIM — first valid touch of the broken rail inside the post-break window - Interaction Zone contact — visual ATR pocket around active channel rails - Channel Quick Tags (MEX / MIN / mEX / mIN, Up / Dn) — compact family labels on active channels Alert conditions (all 16 toggleable, Major alerts On by default, Minor Off by default): - Break: Major External Up / Down - React: Major External Up / Down - Break: Major Internal Up / Down - React: Major Internal Up / Down - Break: Minor External Up / Down - React: Minor External Up / Down - Break: Minor Internal Up / Down - React: Minor Internal Up / Down Message frequency is configurable (All / Once Per Bar / Once Per Bar Close). Alerts include symbol, timeframe, time zone and event description. 🔹 KEY INPUTS - Pivot Engine: Pivot Period (default 5) - Per-family Visibility: 8 Show / Delete-Previous / Color / Style / Extend / Width groups - Channel Qualification: Mode (Off / Balanced / Strict), Apply To (All / Major Only / Minor Only), ATR Length - Broken Channel Memory: Scope (Off / Major Only / All), Keep (Last 1 / Last 2), Style - Channel Midline: Show, Apply To, Scope, Style, Width, Opacity - Active Map Clarity: Line Emphasis, Base-Line Focus, Event Markers, React Cooldown, React Min Price Distance, Quick Tags, Tag Scope, Tag Size, Event / Quick Tag Vertical Offsets - Interaction Zones: Scope, Rails, Zone Width ATR, Extend Bars, Opacity, Zone Text - Post-Break Retest / Reclaim: Scope, Window Bars, Label Offset ATR - Panel: Show, Position, Font Size - Alerts: 16 per-family Break / React toggles, Alert Name, Frequency, Time Zone 🔸 HOW TO USE Getting started: 1. Apply the indicator on any symbol and timeframe. 2. Start with default settings: Qualification Off so the full structural map is visible. 3. If the chart feels busy on lower timeframes, switch Qualification to Balanced or Strict. Reading the panel: - Major Live / Minor Live — active channels per class - Nearest Channel — closest active channel, with ATR distance and Near / Mid / Wide / Far tag - Qualification — current filter mode and scope - Interaction — interaction zone scope and rails - Post-Break — tracker scope, window and prevailing Major tilt Common workflows: - Trend continuation: wait for price to hold an Active Major channel and look for a REACT at the rail inside the channel direction. - Break-and-retest: after a BREAK event, watch for the RETEST / RECLAIM label inside the Post-Break window. - Confluence: use Interaction Zones to spot where Major and Minor rails meet at the right edge of the chart. - Higher-timeframe context: open a higher timeframe tab with the same script to map macro structure around your execution timeframe. Suggested defaults: - Intraday traders: 15m–1H base TF, Balanced qualification - Swing traders: 4H–1D base TF, Balanced or Off qualification - Higher-timeframe context: 1D–1W with Qualification Off 🔹 LIMITATIONS & TRANSPARENCY - Pivot-based. Pivots require the configured number of bars to confirm, so the most recent swing always lags by Pivot Period bars. This is a structural property of confirmed pivots, not a bug. - Redraw behaviour. Active channels are extended forward each bar until a break is confirmed on close. Channel end-points can therefore adjust as new pivots qualify. - Alerts fire on confirmed conditions. Break and React alerts require barstate.isconfirmed, so intra-bar touches do not trigger alerts. - Timeframe behaviour. On very high timeframes with limited history (e.g. weekly / monthly on newer instruments), the total pivot count can be small. Keep Qualification at Off on higher timeframes to avoid over-filtering. - This is a visualisation / structure tool. It is not a trading strategy, it does not manage risk, and it does not generate buy / sell recommendations. All entries and exits are the trader’s responsibility. 🔸 RISK DISCLOSURE This script is a technical analysis tool intended for educational and analytical purposes only. It does not constitute financial advice, investment recommendations, or a solicitation to buy or sell any asset. Past chart behaviour does not guarantee future results. Trading involves significant risk and can result in the loss of capital. Always do your own research, use proper risk management, and consider consulting a licensed financial advisor before making trading decisions.
Wskaźnik Pine Script®
od AGProLabs
Value Shift Ladder [AGPro Series]Value Shift Ladder 🔹 Overview Value Shift Ladder is a market-structure mapping tool that extracts the most volume-accepted price shelves from a rolling lookback window and arranges them, in creation order, as the rungs of a ladder. Each rung is a volume-weighted zone where the market has recently spent the most time and traded the most contracts. The script then tracks how price interacts with every rung through a full Held → Broken → Reclaimed lifecycle and summarizes the entire chain into one readable ladder state: Rising, Falling, Mixed, Broken, Reclaiming, Building, or Neutral. The goal is not to predict direction and not to produce buy or sell signals. The goal is to give the chart reader a continuously updated answer to one question: where is the market's current fair-value region, how is that region moving over time, and which prior value shelves are still relevant versus which have been abandoned. This makes the tool useful as a structural reference for volume-profile readers, auction-theory traders, and anyone who builds a bias from accepted-value migration rather than from trend lines or moving averages. 🔸 Unique Edge Most volume-based tools either draw a single static profile snapshot, or plot every candidate level and leave the reader to filter. Value Shift Ladder does three things differently: Multi-shelf chronological ladder. Instead of producing one value band, the script maintains a ranked set of up to eight volume-accepted shelves and arranges them in the order they were first registered. This preserves the migration history of accepted value instead of collapsing it into one average. Proximity-gated visualization. Only shelves within a configurable ATR distance from current price are drawn on the chart, counted in the panel, and fed into the ladder direction state. Distant historical shelves exist in memory but do not clutter the chart or bias the readout — the ladder always reflects the value structure that is actually relevant to the current bar. Adaptive, confidence-aware breaks. A shelf is not broken on a single close outside its band. Young shelves are strongly protected (3.0 × ATR), maturing shelves require a medium distance (1.5 × ATR), and fully-aged shelves use the user-defined break distance. Shelves that have been re-confirmed multiple times gain a 2× confidence multiplier on top of that, preventing established value regions from being lost to a single volatility spike. 🔸 Methodology 1) Volume Profile Construction The script divides the rolling lookback window into equal price bins and distributes each bar's volume across every bin it touches, proportional to range coverage. Zero-range bars are assigned to their single bin. This produces a volume-weighted histogram of the lookback period. 2) Shelf Extraction The top-K bins by volume are selected iteratively. After each pick, the chosen bin and its ATR-neighborhood are zeroed out before the next pick, enforcing a minimum separation between shelves and preventing a single high-volume cluster from dominating every rung. Each surviving bin becomes a shelf, anchored at its bin-center price. 3) Shelf Merging and Confidence On every refresh, newly extracted shelves are checked against existing ones. If a new shelf falls within the ATR separation of an existing non-broken shelf, the existing shelf's volume is refreshed and its confidence score is incremented. Otherwise a new shelf is registered. Confidence is capped at ten and used downstream to scale break tolerance. 4) Lifecycle State Machine Each shelf carries one of three states — Held, Broken, or Reclaimed. Held flips to Broken when price closes beyond an adaptive break distance for three recent bars. Broken flips to Reclaimed when price dwells back inside the band for a user-defined number of bars. Reclaimed auto-promotes to Held once the shelf has stabilized past a short age threshold. 5) Ladder Direction Proximity-filtered active shelves are sorted by creation order. The last one, two, or three rungs are compared to produce a single state: Rising if the sequence is monotonically higher, Falling if lower, Mixed if non-monotonic, plus transient overrides for Broken, Reclaiming, Building, or Neutral conditions. 6) Pruning Stale broken shelves expire after a timeframe-aware window. A hard cap of ten active shelves is enforced, with broken shelves removed first when the cap is hit. 🔹 Signals and Alerts The script provides four deterministic state-change alerts, all tied to closed-bar transitions: — New Ladder Step Formed: fires when a new volume-accepted shelf is first registered. — Ladder Step Held: fires when an existing shelf is re-confirmed by the rolling profile. — Ladder Step Broken: fires when a held shelf transitions to broken. — Ladder Step Reclaimed: fires when a broken shelf transitions back to reclaimed. These alerts describe structural state changes inside the indicator logic. They are not trade signals and do not imply expected profitability, win rate, or directional certainty. 🔸 Key Inputs — Profile Mode (Auto / Manual): Auto derives lookback and refresh from the chart timeframe. Manual exposes both for full control. — Manual Lookback (bars): Size of the rolling window used to build the profile. — Manual Refresh Interval (bars): How often the profile is rebuilt. — Profile Resolution (bins): Number of price bins the range is divided into. — Target Shelf Count: Maximum number of shelves kept active. — Min Volume Ratio: Minimum fraction of the top-bin volume a bin must hold to qualify as a shelf. — Min Shelf Separation (ATR): Minimum ATR distance between two shelves. — Break Distance (ATR): Fully-aged break tolerance. — Reclaim Dwell Bars: Bars needed inside the band to flip Broken to Reclaimed. — Max Visible Distance (ATR): Proximity gate for drawing and counting shelves. — Display options: panel position, panel font size, on-chart label size, alerts toggle. 🔹 How to Use Value Shift Ladder is designed as a structural reference rather than a signal engine. Typical reading workflows include: — Bias framing. Read the Ladder state first. Rising or Falling indicates a one-sided migration of accepted value; Mixed indicates balance; Broken or Reclaiming highlights an active transition. — Dominant reference. The Dominant row in the panel highlights the nearest held or reclaimed shelf within two ATR of price. Use it as the closest structural reference for scenario planning, not as an execution level. — Proximity discipline. Because shelves more than the configured ATR distance away are not drawn, the ladder always reflects value structure that is currently relevant. When no shelves are visible, the market is between value regions — a context in which mean-reversion assumptions weaken. — Confluence. The tool is designed to be combined with independent confirmation such as session structure, higher-timeframe bias, or volume analysis. It is not meant to stand alone as a decision source. 🔸 Limitations and Transparency — Volume profile quality depends on the instrument's volume reporting. On symbols with unreliable or synthetic volume, shelf placement may drift. — The profile is recomputed on the close of refresh bars. Intrabar readings on the current bar can change until the bar closes; state transitions evaluate the last three bars for breaks and the reclaim-dwell window for reclaims, so fresh transitions can flip until those bars close. — On extremely illiquid sessions or instruments with frequent volatility spikes, the adaptive-break logic can delay transitions by design. This is a tradeoff in favor of stability. — Past structural behavior at a shelf does not guarantee future behavior. The tool does not forecast direction and is not a trading strategy. 🔹 Risk Disclosure This script is a structural visualization tool provided for educational and analytical purposes. It is not financial advice, not a trading strategy, and not a signal service. All trading involves risk of loss. Past market behavior is not indicative of future results. Users are fully responsible for their own trading decisions and for independently verifying the tool's behavior on their chosen instruments and timeframes before relying on it for any purpose.
Wskaźnik Pine Script®
od AGProLabs
Rejection Block Quality [AGPro Series]Rejection Block Quality 🔹 OVERVIEW Rejection Block Quality is an ICT-inspired detector that identifies long-wick rejection candles at swept swing pivots and grades each block by objective quality criteria. Unlike Order Block logic — which anchors to the last opposite-direction body before displacement — a Rejection Block (RB) is born from a wick that pierces a prior swing liquidity pool and closes back inside it, with the body confirming displacement on the follow-through bar. The rectangle is drawn from the wick base to the candle body, capturing the exact zone where smart money absorbed the sweep. 🎯 UNIQUE EDGE Three design choices separate this tool from generic wick or order block indicators: • Swing-pivot sweep requirement — a rejection is only counted when price sweeps a confirmed swing high or low before the reversal close. Stand-alone wick patterns without liquidity context are filtered out. • Displacement confirmation window — the candle following the rejection must travel at least 0.6× ATR in the reversal direction, within a 1–5 bar lookahead. No displacement, no block. • Quality tiering (A / B / C) from three orthogonal factors — wick-to-body ratio, displacement magnitude, and untested freshness. An exceptional wick ratio (≥5× body) promotes a block to A tier regardless of other scores, preserving rare high-conviction rejections. 🛠️ METHODOLOGY Detection pipeline on every bar: 1. Confirm a pivot sweep using a user-configurable lookback (default 5 bars each side). 2. Check the wick-to-body ratio against a minimum threshold (default 1.8×), with the dominant wick on the sweep side. 3. Queue the candle as a pending block and wait for displacement confirmation. 4. Measure displacement as price travel from the body reference over 1 to 5 bars, normalized by ATR. 5. On confirmation, draw the RB zone from the wick base to the body, record the tier, and begin lifecycle tracking. Zone lifecycle tracks four events — test (price enters the zone), hold (price exits without a body close through the far edge), break (body close through the far edge), and near miss (price approaches within a configurable ATR band without entering). All events are edge-detected to prevent inflated counts when price lingers near a zone. 📊 SIGNALS & ALERTS • New block formation label — A / B / C tier plus wick ratio, placed with anti-collision offset. • Test markers (T) — one per zone entry event, with cooldown to prevent visual clutter. • Break markers (B) — placed when a zone is invalidated by a body close. • Wick border highlight — thick colored line on the originating rejection candle. • Alerts — configurable minimum tier (A, B, or C) fires once per bar close for each qualifying new block. ⚙️ KEY INPUTS • Detection — Pivot Length, Min Wick-to-Body Ratio, ATR Length, Min Displacement (× ATR), Displacement Confirm Window. • Zone Management — Max Active Zones per Side, Zone Right Extension, Near-Miss Distance, Near-Miss Cooldown, Break Requires Full Body Close. • Visuals — Show Zones, Show Tier Labels, Highlight Rejection Wick Border, Show Test / Hold / Break Markers, Zone Fill Opacity, Label Font Size. • Panel — Show Panel, Panel Location, Panel Font Size, Panel Theme (Dark / Light). • Alerts — Minimum Tier for Alerts. 🧭 HOW TO USE Start on a higher timeframe (4H or 1D) to identify macro RB zones, then drill down to execution timeframes for entries. Treat A-tier blocks as the highest-conviction zones, B-tier as situational, and C-tier as context-only. Combine with trend filters, higher-timeframe structure, and risk management — a Rejection Block is a zone of interest, not a standalone buy or sell signal. Use the panel statistics to evaluate how the selected symbol and timeframe have historically respected these zones before committing to them in live decision-making. ⚠️ LIMITATIONS & TRANSPARENCY This indicator is a structural detector, not a trading strategy. It does not forecast price direction, generate entry or exit orders, or calculate position sizing. The Success Rate statistic reflects how often past tests on detected zones held versus failed within the visible history — it is a descriptive metric, not a performance projection. Zone detection is historical and reactive: a block only appears after the displacement bar closes, so interpretation on live-forming bars is tentative. Performance varies by symbol, timeframe, and market regime. ⚠️ RISK DISCLOSURE Trading involves substantial risk of loss. Past behavior of any pattern does not guarantee future outcomes. Use this tool as part of a complete analytical framework that includes your own risk management, position sizing, and broader market context. Nothing in this indicator or description constitutes financial advice.
Wskaźnik Pine Script®
od AGProLabs
8
Head & Shoulders Auto Detector [AGPro Series]Head & Shoulders Auto Detector 🎯 **Overview** Head & Shoulders Auto Detector is a precision pattern recognition tool that automatically identifies classic Head & Shoulders (bearish) and Inverse Head & Shoulders (bullish) reversal formations across any market and timeframe. Built from the ground up for traders who want the full lifecycle of a pattern tracked on-chart — not just a label and a line, but forming → confirmation → target/stop outcome — with a transparent, quality-scored framework that filters low-probability setups before they clutter the chart. Every pattern carries a composite quality score, a symmetry percentage, an ATR-adaptive neckline, two projection targets, and a live status label that evolves through the pattern's lifespan. 🔹 **Unique Edge** Most H&S indicators stop at detection. This one goes further: • **Full lifecycle state machine** — every pattern moves through four explicit states (Forming → Confirmed → Target Hit / Stopped / Invalidated / Expired), and the visuals update in real time at each transition. • **Dead pattern hygiene** — once a pattern fails or hits target, orphan TP and stop lines are removed, the neckline freezes at the decision bar, and the status label grays out. The chart never accumulates stale clutter. • **Quality-driven visual hierarchy** — high-quality patterns (Q≥75) are rendered with a star marker and full saturation, mid-tier patterns get standard treatment, and low-tier patterns (Q<60) fade into the background so the trader's eye is guided to what matters. • **Dual-target projection with R:R** — every confirmation displays both a classic measured-move TP1 and an extended 1.618× TP2, each labeled with the exact reward-to-risk ratio calculated at entry. • **ATR-adaptive everything** — shoulder tolerance, neckline flatness, head prominence, stop buffer, and label offsets all scale with volatility, so the same settings work across BTC 4H, gold daily, or small-cap stocks. 🔹 **Methodology** Patterns are detected from confirmed pivot highs and lows using a configurable pivot length. For a valid Head & Shoulders, three same-side pivots (Left Shoulder → Head → Right Shoulder) must satisfy: • Head extends beyond both shoulders by at least the configured ATR multiple (prominence test). • Shoulder heights differ by less than the shoulder tolerance in ATR units (symmetry test). • Two opposite-side pivots between LS-Head and Head-RS define the neckline; their vertical distance must be within the neckline tolerance. • Composite symmetry score (50% time symmetry, 50% price symmetry) must exceed the minimum threshold. Quality score combines four weighted components: • Symmetry (45%) — time + price balance between shoulders • Neckline flatness (25%) — how horizontal the neckline is • Volume profile (15%) — head-bar volume relative to shoulder average • Head prominence (15%) — how clearly the head dominates Confirmation triggers when price closes beyond the neckline level (interpolated for sloped necklines). Stop is placed at the head level plus an ATR buffer to avoid wick stop-outs. TP1 uses the standard head-to-neckline measured move; TP2 extends to 1.618× that projection. 🔹 **Signals & Alerts** Four alert events available: • **Pattern Forming** — a valid H&S or Inverse H&S structure has been detected but not yet confirmed. • **Pattern Confirmed** — close has broken the neckline; entry is live with TP/Stop drawn. • **Target Hit** — TP1 has been reached on a confirmed pattern. • **Neckline Retest** — after confirmation, price has returned to touch the neckline (common high-probability re-entry zone). 🔹 **Key Inputs** • **Pivot Length** — controls swing-point sensitivity • **Min Symmetry Score** — minimum shoulder symmetry percentage to accept a pattern (default 60, balanced) • **Neckline Tolerance (ATR)** — how sloped a neckline is allowed to be • **Shoulder Height Tolerance (ATR)** — how different the two shoulders can be • **Head Prominence (ATR)** — minimum head extension beyond shoulders • **Volume Soft Confirmation** — toggle volume influence on quality score • **TP1 Method** — Classic (horizontal neckline reference) or Measured Move (slope-aware) • **Stop Buffer (ATR)** — extra room beyond the head level (default 0.35) • **Max Pattern Lifetime** — bars after which an unconfirmed pattern expires • Full visual controls: font size, panel position, theme, zone display, label offset, color palette 🔹 **How to Use** 1. Apply the indicator to any liquid market and timeframe. 4H and higher tend to produce the most reliable formations; intraday works but expects more noise. 2. Watch for patterns labeled with a ⭐ and bright color (Q≥75) — these are the highest-confidence setups. 3. Wait for the ✓ Confirmed status to appear before entering; the ⚡ breakout marker pinpoints the exact confirmation bar. 4. Use the TP1 / TP2 R:R labels to size the trade. Stop is pre-calculated at head level + ATR buffer. 5. Monitor the panel stats over time to understand the indicator's behavior on your specific market — Win Rate, Avg Quality, and Last Signal all update live. 6. Consider combining with trend context (a bearish H&S is far more powerful at resistance in a downtrend than in the middle of a strong uptrend). 🔹 **Limitations & Transparency** • Pattern detection uses confirmed pivots, so signals appear with a natural delay equal to the Pivot Length setting. This is intrinsic to pivot-based logic, not a flaw. • Quality score and historical win rate are chart-native calculations based on the loaded history; they are descriptive, not predictive. • The script does not include multi-timeframe confluence or trend filters — these are deliberate design choices to keep the tool focused and composable with other indicators. • Volume confirmation is a soft scoring input, not a hard filter, since many crypto pairs and indices have volume data of variable reliability. • Pattern state transitions use close-based confirmation; intrabar wicks do not trigger state changes except for stop/target hits, which are high/low based as expected. 🔹 **Risk Disclosure** This indicator is an analytical tool, not a trading recommendation or financial advice. Pattern recognition describes what has formed on a chart; it does not predict future price movement with certainty. Always use proper risk management, position sizing, and confirm signals with your own analysis. Past pattern statistics shown on the panel are descriptive of the visible history and do not guarantee future performance. Trading involves substantial risk of loss.
Wskaźnik Pine Script®
od AGProLabs
Adaptive Volume Concentration Levels + Volume-Price Shift BoxDescription Adaptive Volume Concentration Levels + Volume-Price Shift Box combines two powerful market analysis concepts into one streamlined tool: adaptive volume-based support and resistance mapping, and a real-time volume-price flow dashboard. The script identifies the most meaningful price zones based on where volume has concentrated over a chosen lookback range, helping highlight areas where the market has shown strong interest. At the same time, it displays a compact shift box that evaluates price, volume, VWAP, OBV, A/D behavior, and momentum to estimate whether market pressure is currently bullish, bearish, or neutral. This makes the script useful for traders who want both structural levels and contextual order-flow style bias in a single indicator. How It Works The script has two main components: -Adaptive Volume Concentration Levels It scans historical price action over a customizable lookback period. Price is divided into bins, and volume is accumulated into those bins. The script then selects the highest-volume zones and converts them into horizontal support/resistance levels. A higher timeframe option and smoothing feature can be used to reduce noise and reveal more stable levels. Levels can be displayed with custom colors, line styles, transparency, and optional percentage labels. - Volume-Price Shift Box The dashboard evaluates several internal conditions: VWAP trend and price distance from VWAP OBV trend and OBV acceleration A/D line trend Relative volume versus average volume Price momentum Weighted bullish and bearish scores are calculated from these components. The final shift score determines whether the current state is: Bullish Bearish Neutral The box then displays key readings such as shift strength, volume vs average, VWAP distance, shift duration, and OBV state. Key Features Adaptive volume-based support and resistance detection Dual SR logic for identifying important high-volume price zones Optional higher timeframe processing for cleaner structure Price smoothing to reduce noise in level calculation Customizable level count, bin density, transparency, labels, and styling Real-time shift box with bullish, bearish, or neutral bias Weighted scoring model using VWAP, OBV, A/D, volume, and momentum Shift strength readout for quick bias confirmation Shift duration tracking to show how long the current condition has persisted Clean visual layout that combines structure and flow into one script How to Use Start by applying the indicator to your chart and adjusting the level settings based on your trading style. For the volume concentration levels: Increase the lookback if you want broader, more established levels. Increase the number of bins for finer price granularity. Use the minimum volume filter to remove weaker levels. Turn on the higher timeframe option if you want more stable zones from a broader market perspective. For the shift box: Use the default settings first, then adjust sensitivity and component weights to better match your market and timeframe. Watch for bullish or bearish shifts when price approaches one of the plotted volume levels. Use the strength reading to judge whether the bias is weak or decisive. Monitor duration to see whether the current directional pressure is fresh or extended. A practical workflow is: Use the horizontal levels as reaction zones Use the box to judge whether current pressure supports continuation or rejection from those zones Combine both with your existing entry and risk management rules How It Helps How It Helps This script helps simplify decision-making by combining where price is likely to react with how price and volume are behaving right now. The volume concentration levels help traders identify: likely support and resistance potential reaction zones areas of prior market agreement or interest The shift box helps traders evaluate: whether buyers or sellers currently have control whether momentum and volume are aligned whether market pressure is strengthening or fading Used together, the tool can help with: trade location directional confirmation filtering weak setups improving timing around important price zones It is especially useful for traders who want a clearer view of both market structure and current flow conditions without cluttering the chart with multiple separate indicators. Disclaimer This indicator is provided for informational and educational purposes only. It does not constitute financial advice, investment advice, trading recommendations, or an offer or solicitation to buy or sell any financial instrument. All indicator outputs, classifications (including bullish, bearish, or neutral states), and visual elements are derived from historical market data using user-defined parameters. These outputs are interpretive in nature and do not predict future market performance or guarantee any specific result. Trading financial instruments involves substantial risk, including the risk of loss exceeding initial capital. Market conditions may change rapidly due to factors outside the scope of this indicator, including but not limited to economic events, news releases, liquidity conditions, execution quality, and slippage. The developer assumes no responsibility or liability for any trading decisions, losses, or damages arising directly or indirectly from the use of this indicator. Users are solely responsible for evaluating the suitability of this tool for their own trading objectives, risk tolerance, and market conditions. Past performance, indicator behavior, or historical alignment of signals does not guarantee future results. Use of this indicator constitutes acceptance of these terms.
Wskaźnik Pine Script®
od IndicatorEliteFlow
AG Pro Daily Open Acceptance Map [AGPro Series]AG PRO DAILY OPEN ACCEPTANCE MAP OVERVIEW AG Pro Daily Open Acceptance Map is an intraday overlay built to track how price behaves around the current daily open and to present that behavior in a clean, rules-based structure. Instead of treating the daily open as a passive reference line, this script evaluates whether price is being accepted above it, accepted below it, or repeatedly failing around it. The core design goal is clarity. Many traders use the daily open as a contextual anchor, but in practice it is often shown as only a simple line with no structured interpretation. This script is designed to go one step further by turning that level into a mapped decision framework. The result is a chart that helps users read whether the market is holding one side of the daily open with acceptance, drifting into indecision, or failing to maintain directional control. This tool is intentionally narrow in scope. It is not built as a full market structure engine, a session model, a prior high/low dashboard, a VWAP tool, or a moving average framework. Its role is much more specific: to organize the behavior of price around the daily open and to express that behavior through a compact state model, visual reference lines, and confirmed state transitions. Because the daily open resets every trading day, the script also produces a recurring intraday reference that can be reused across many symbols and market conditions. This makes it useful for users who prefer repeatable visual anchors instead of highly discretionary chart interpretation. WHAT IT DOES This script identifies the current daily open and treats it as the primary intraday reference level. From there, it evaluates whether price is holding above the level, holding below the level, or still testing the area without confirmation. It also tracks the first reclaim event when enabled, allowing users to see whether the market has recovered one side of the level after losing it earlier in the day. The overlay is structured so the current daily open remains the main visual anchor, while the previous daily open can be shown as a lighter secondary context level. Acceptance areas and state mapping are kept as supporting elements rather than replacing the open itself. This keeps the chart readable while still preserving a visual record of how the market behaved around the level throughout the session. In practical terms, the script helps answer a simple but important question: is price truly holding one side of the daily open, or is it only rotating around it without meaningful acceptance? HOW THIS DIFFERS FROM OTHER AG PRO TOOLS This script is intentionally separated from the logic families used in other AG Pro tools. It does not rely on VWAP behavior. It does not build decisions from EMA or moving average relationships. It does not classify price by prior day or prior week high/low structures. It does not depend on sweep, stop hunt, liquidity trap, or session-kill-zone logic. It does not function as a structure label, breakout, or order-flow style engine. The purpose here is much more focused. AG Pro Daily Open Acceptance Map is a daily-open behavior tool. Its main question is not whether a breakout happened, whether liquidity was taken, or whether a trend indicator flipped. Its main question is whether the market is accepting or rejecting one side of the current daily open. That narrow positioning is deliberate. It helps keep the chart logic cleaner, the visual language simpler, and the use case easier to understand. UNIQUE EDGE The unique edge of this script is not the presence of a daily open line by itself. Many tools can plot a daily open. The distinctive part of this indicator is the state framework built around that line. Instead of only drawing the level, the script evaluates market behavior around it and converts that into a practical overlay language. The chart can therefore communicate whether the market is in bullish acceptance, bearish acceptance, or unresolved testing, rather than forcing the user to interpret every interaction manually. The script also separates the current daily open from the previous daily open in a clear visual hierarchy. The current open is treated as the primary live anchor, while the previous open is optional secondary context. This helps users compare the active intraday reference against the prior session without turning the chart into a multi-level dashboard. Another advantage is that the visual model remains compact. The script is designed to offer information density without becoming visually noisy, which is especially important on publish screenshots and on charts where traders prefer a clean price-first layout. METHODOLOGY The script starts by identifying the current daily open and, when enabled, the previous daily open. The current daily open becomes the main reference for all live state calculations. From there, the script measures whether price is sustaining closes above the level, sustaining closes below the level, or remaining in a testing state around the level. The filter mode can be adjusted to make the interpretation more responsive or more selective. In more permissive settings, state shifts can appear earlier. In stricter settings, price generally needs cleaner confirmation before a state is recognized. When reclaim logic is enabled, the script also monitors whether one side of the daily open is recovered after being lost earlier in the day. This is not treated as a separate prediction model. It is simply an additional contextual event that can help users understand whether the market is recovering control around the open after temporary failure. The acceptance area, open zone, and state ribbon are visual support layers. They are not intended to replace price or overwhelm the chart. Their purpose is to make the interpretation easier to read while keeping the current daily open as the main anchor. SIGNALS AND ALERTS The script supports confirmed-bar style logic so that state changes can be tracked in a more stable way. Depending on the enabled settings, users can monitor: Bullish acceptance conditions Bearish acceptance conditions Testing or unresolved behavior around the daily open First reclaim context when enabled General state transitions when the market changes side or loses control These alerts and visual states are intended for chart organization and condition awareness. They should not be interpreted as guaranteed trade outcomes, guaranteed continuation signals, or automated execution instructions. KEY INPUTS FILTER MODE Users can switch between stricter and more responsive behavior depending on how selective they want the state model to be. HOLD / CONFIRMATION SETTINGS These controls affect how much sustained price behavior is required before the script recognizes an accepted state. TOLERANCE AND OPEN ZONE SETTINGS These help define how tightly or loosely the script interprets price behavior around the daily open area. FIRST RECLAIM SETTINGS These controls determine whether reclaim events are tracked as part of the daily open behavior model. DISPLAY SETTINGS Users can control whether the current daily open, previous daily open, acceptance area, ribbon, labels, and panel elements are shown. VISUAL SIZE SETTINGS Panel and label sizing can be adjusted depending on symbol volatility, screen resolution, and chart density preferences. LIMITATIONS AND TRANSPARENCY This script is not a forecasting engine. It does not predict where price must go next. It evaluates how price is behaving relative to the current daily open and displays that information in a structured way. It is also not a substitute for complete market analysis. It does not include broader trend context, liquidity analysis, volume profile logic, macro structure interpretation, news impact, or instrument-specific catalysts unless the user applies those separately. Different symbols and timeframes can also produce different daily open behavior. In some instruments the daily open may act as a very strong intraday reference, while in others price may rotate around it more loosely. Because of that, the script should be interpreted as a contextual decision aid rather than a universal standalone solution. The previous daily open is included only as optional secondary context. It does not drive the main state model. The main live logic is built around the current daily open. RISK DISCLOSURE This script is provided for market analysis, chart organization, and educational use. It does not provide financial advice, investment advice, or guaranteed trade signals. No indicator can remove market risk, and no visual state model can ensure a profitable result. Traders should use their own judgment, position sizing rules, and risk management process before making any decision. This tool can help structure chart interpretation, but execution responsibility always remains with the user.
Wskaźnik Pine Script®
od AGProLabs
2
EAB: Multi-Timeframe Moving AveragesEAB: Multi-Timeframe Moving Averages is a clean and customizable indicator designed to display key moving averages across multiple timeframes in a single chart. It allows traders to visualize short, medium, and long-term trends using a consistent and structured framework, aligned with a professional trading workflow. Features Multi-timeframe support: Intraday, Daily, Weekly and Monthly Fully customizable moving averages (type, length, source, color and visibility) Label system displayed directly on the chart (e.g., EMA 10, MA 50) Optional moving average cloud between key averages Weekly moving average overlay on the daily chart for higher timeframe context How to use Enable or disable moving averages from each timeframe section. Configure type (EMA, SMA, etc.) and length according to your strategy. Use EMA 10 and EMA 20 for short-term trend direction. Use MA 50 and MA 200 for structure and key support/resistance levels. Combine multiple timeframes to confirm trend alignment. Notes Labels are displayed only on the last visible bar to keep the chart clean. Each timeframe can be configured independently. Moving average clouds can be enabled or disabled for better visual clarity.
Wskaźnik Pine Script®
od EwaldoAB
AG Pro Equal High / Equal Low Sweep Engine [AGPro Series]AG Pro Equal High / Equal Low Sweep Engine Overview / What it does AG Pro Equal High / Equal Low Sweep Engine is a price-action overlay designed to detect equal highs (EQH) and equal lows (EQL), track the liquidity pools that form around those levels, and highlight sweep events when price briefly trades through them and then closes back with confirmation. The script focuses on one specific market behavior: clustered highs and lows that tend to attract liquidity, followed by rejection-style sweeps that can mark failed continuation attempts, trap conditions, or local reaction points. Instead of treating every wick through a prior level as equally important, the script separates untouched pools from already swept pools, applies a configurable tolerance model for defining EQH/EQL structures, and adds close-based confirmation logic so users can filter out weaker events. Short liquidity lines, band-style zones, trap labels, and a compact summary panel are used to keep the information visible without turning the chart into a large box-based map. This tool is built for traders who want a structured view of repeated highs/lows and the liquidity behavior around them. It is not intended to label every possible swing event on the chart. Its purpose is narrower and more deliberate: identify equal-high / equal-low liquidity pools, monitor whether they remain intact or get swept, and display the sweep in a visually organized way. Unique Edge The main distinction of this script is that it does not attempt to map all forms of stop runs or all types of liquidity events. It concentrates specifically on EQH/EQL liquidity pools and the sweep lifecycle around those pools. That narrower scope allows the chart objects to remain more readable while still showing useful structure. The script also distinguishes between untouched and swept states. This matters because a fresh liquidity pool and a previously swept pool do not represent the same chart condition. Untouched pools can still act as active draw-on-liquidity zones, while swept pools become part of recent context and may be interpreted differently depending on the user's framework. A second differentiator is the combination of equal-pool detection, close confirmation, and optional quality scoring. Equal highs and equal lows are first identified using pivot logic and a user-defined tolerance percentage. Then, when price trades through the pool, the script can require either any wick, a reclaim close, or a stronger rejection close before confirming the sweep. An optional quality bonus can further weight events when relative volume and rejection characteristics are more supportive. The visual model is also intentionally selective. Instead of using large generalized rectangles across the whole chart, the script uses shorter liquidity lines and band zones tied directly to the detected pool. This keeps the visuals anchored to the detected structure rather than creating broad areas that may overstate precision. Methodology 1) Equal High / Equal Low Detection The script uses pivot highs and pivot lows to build candidate swing points. When two highs or two lows form within the user-defined tolerance threshold and within the required bar spacing, they are treated as an equal-high or equal-low liquidity pool. Multiple nearby pools can optionally be merged into a cleaner combined structure. 2) Liquidity Pool Lifecycle Once a pool is created, it is tracked as active until one of two things happens: it is swept by price, or it expires after its configured lifetime. The script maintains state so pools can be shown as untouched, swept, or removed when they are no longer relevant. 3) Sweep Confirmation A sweep is not limited to price piercing the level. The script can require: - Any Wick: any trade-through qualifies. - Reclaim Close: price must close back through the level after the sweep. - Strong Rejection: a stricter close-position filter is applied. This helps users decide how sensitive or selective they want the engine to be. 4) Quality Logic When enabled, the script calculates a quality score using rejection characteristics, close position, relative volume behavior, pool freshness, and pivot clustering. This is not a predictive score or a probability model. It is a contextual ranking layer intended to help compare sweeps on the same chart. 5) Visual Presentation The script can draw: - short horizontal liquidity lines - band-style EQH/EQL zones - optional reaction boxes after selected sweeps - trap labels on confirmed events - a summary panel showing current pool and sweep status Signals & Alerts The script includes alert conditions for: - new EQH pool detected - new EQL pool detected - EQH sweep confirmed - EQL sweep confirmed - any sweep confirmed These alerts are event-based and depend on the current settings used for confirmation and filtering. If stricter filters are selected, the number of confirmed events will naturally decrease. Key Inputs Pivot Strength Controls how swing highs and lows are confirmed. Higher values usually produce fewer, more structurally significant pools. EQH / EQL Tolerance % Defines how close two highs or lows must be to qualify as equal. Lower values make the script stricter. Higher values allow broader matching. Min / Max Bars Between Pivots Controls the acceptable spacing between the two pivots that define a pool. Sweep Close Filter Lets the user choose between wick-only behavior and more selective reclaim/rejection confirmation. Quality Bonus Adds an optional scoring bonus when the sweep also shows stronger contextual characteristics. Liquidity Line / Zone Length Controls how far the liquidity structures extend on the chart. Panel and Visual Settings Allow the user to tune panel position, label size, color theme, and display density for different chart styles and timeframes. Limitations & Transparency This script identifies equal highs and equal lows using pivot-based rules and a configurable tolerance model. Because of that, results depend on the chosen settings, the symbol, the timeframe, and the chart's volatility profile. A confirmed sweep should not be interpreted as a guaranteed reversal or a complete trade setup by itself. In some market conditions, price can sweep a pool and continue in the same direction. In other conditions, a sweep may mark only a short-lived reaction. The script highlights structural events; it does not forecast outcome. The quality score is a contextual ranking aid, not a performance promise, win-rate estimate, or statistical edge claim. Different users may prefer different thresholds depending on market regime and execution model. Band zones and reaction areas are visual approximations derived from the detected pool and post-sweep behavior. They are designed to improve chart readability, not to define exact institutional order blocks or guaranteed execution zones. Risk Disclosure This script is an analytical charting tool for studying equal-high / equal-low liquidity behavior and sweep confirmation. It does not provide financial advice, investment advice, or trade recommendations. All trading decisions remain the user's responsibility. Like any technical tool, it should be used with broader market context, risk management, and independent judgment. No indicator can eliminate uncertainty, and past chart behavior does not guarantee future results.
Wskaźnik Pine Script®
od AGProLabs
2
AG Pro Previous Day Sweep & Reclaim [AGPro Series]AG Pro Previous Day Sweep & Reclaim Overview / What it does AG Pro Previous Day Sweep & Reclaim is an overlay built to map one very specific price behavior around the previous day’s range: a sweep of the Previous Day High (PDH) or Previous Day Low (PDL), followed by a reclaim back inside the level. The script is designed for traders who want a structured way to observe failed expansion attempts around prior-day liquidity. Instead of treating every break of PDH or PDL as continuation, this tool focuses on the opposite question: when price briefly trades beyond a prior-day extreme and then reclaims that level, is the move showing signs of rejection strong enough to deserve attention? The core idea is intentionally narrow. This is not a broad market-structure engine, not a support/resistance dashboard, and not a general breakout system. Its purpose is to isolate a specific sequence: sweep -> reclaim -> quality assessment. That single workflow helps keep the script readable and functionally distinct. Signals can be confirmed on the same bar or on the next bar, depending on user preference. Once a reclaim is confirmed, the script assigns a quality score, draws a directional arrow, prints a reclaim label, and keeps the visual structure compact enough for practical chart work across intraday and higher timeframes. Unique Edge The distinguishing feature of this script is that it does not simply plot PDH and PDL, and it does not label every break as meaningful. It attempts to separate ordinary range interaction from failed liquidity grabs by requiring reclaim confirmation and then grading the event. Its logic is centered on reversal-quality mapping rather than static level display. That means the script does more than show where the previous day’s extremes are located. It evaluates whether the move through those extremes was shallow or excessive, whether the reclaim was weak or decisive, whether wick behavior supports rejection, whether volume was comparatively active, and whether the event occurred inside the selected session context. Another practical edge is the confirmation flexibility. Some traders prefer immediate reclaim behavior on the same bar. Others want one additional bar for confirmation. This script supports both approaches, plus an Either mode for broader detection. The visual side is also deliberately managed. Reclaim labels, arrows, guide lines, sweep boxes, label spacing controls, visible label limits, and HTF label filtering are included so the output remains usable instead of turning into uncontrolled chart clutter. Methodology The script retrieves the previous day’s high and low and tracks live interaction with those two reference levels. Bullish reclaim logic begins with a downside sweep: - price trades below the Previous Day Low - price then closes back above the Previous Day Low - confirmation can occur on the same bar, on the next bar, or by either method depending on settings Bearish reclaim logic mirrors that process: - price trades above the Previous Day High - price then closes back below the Previous Day High - confirmation follows the selected reclaim mode After confirmation, the script computes a quality score from multiple components. These components are intended to give structure to the event rather than to claim certainty about future direction. The quality model includes: - sweep depth relative to ATR - reclaim strength within the bar range - rejection wick fraction - relative volume versus a moving average baseline - bar range relative to ATR - urgency factor for same-bar versus next-bar confirmation - candle body bias - session participation The final score is normalized to a 0-100 scale and translated into a simple tier: - A - B - C - D This score is not meant to be a prediction engine. It is a ranking tool that helps organize reclaim events by relative quality under the script’s own rules. Session filtering is available because many traders only want to evaluate sweep-and-reclaim behavior during specific active windows. London, New York, custom sessions, or unrestricted monitoring can be selected. For chart usability, the script also includes: - previous day range fill - optional reclaim guide lines - optional sweep boxes - reversal arrows - reclaim labels - summary panel - visible label limits - HTF smart label filtering - minimum bar spacing between same-side labels Signals & Alerts The script produces two primary confirmed event types: 1. Bullish Previous Day Sweep & Reclaim A downside sweep through PDL followed by a reclaim back above that level. 2. Bearish Previous Day Sweep & Reclaim An upside sweep through PDH followed by a reclaim back below that level. When enabled, the chart can display: - directional reclaim arrows - reclaim labels with score, tier, and confirmation mode - sweep zone boxes - short reclaim guide lines Built-in alerts are included for: - Bullish Previous Day Sweep & Reclaim - Bearish Previous Day Sweep & Reclaim These alerts are tied to confirmed reclaim conditions defined by the selected confirmation mode and minimum quality threshold. Key Inputs Reclaim Confirmation Choose whether confirmation must occur on the Same Bar, Next Bar, or Either. One Signal Per Side / Day Limits repeated signals of the same side within a single day. Use Session Filter Restricts detection to the selected session environment when desired. Minimum Quality Score Filters out lower-ranked reclaim events. ATR Length / Volume SMA Length Inputs used by the quality model. Ideal Sweep Depth (ATR) / Maximum Sweep Depth (ATR) Define how the script evaluates sweep depth quality. Label and Visual Controls Manage font size, offset, sweep boxes, guide lines, visible label count, and general chart cleanliness. HTF Smart Label Filter Helps reduce label overload on daily, weekly, and monthly charts. Minimum Bars Between Same-Side Labels Introduces spacing between repeated bullish or bearish reclaim labels to prevent visual stacking. Limitations & Transparency This script is an analytical overlay. It is not a strategy, not an execution model, and not a guarantee of reversal. A reclaim of PDH or PDL can still fail. Markets can continue trending after a sweep, especially during strong directional conditions, news-driven volatility, or low-liquidity distortions. For that reason, the quality score should be interpreted as an internal event-ranking framework, not as proof of future performance. Session settings matter. Timeframe context matters. Confirmation mode matters. Label filters also affect what is visible on the chart, especially on higher timeframes. Users should understand that changing these inputs changes the strictness and presentation of the output. This tool does not use order book data, broker-specific execution data, or hidden liquidity metrics. It works entirely from chart-based price and volume inputs available in Pine. It is also important to note what this script does not attempt to do: - it does not classify overall market regime - it does not replace broader structure analysis - it does not define entries, stops, or exits for the user - it does not evaluate multi-level confluence outside its own reclaim framework In short, it is a focused map for previous-day sweep and reclaim behavior, nothing more and nothing less. Risk Disclosure This script is for chart analysis and educational use only. It does not provide financial, investment, legal, or tax advice. All trading decisions involve risk. Past price behavior around previous-day levels does not guarantee future results. Users should apply their own confirmation process, risk management rules, and market context analysis before acting on any chart signal. Always test settings carefully and use the tool as one component inside a broader decision-making process, not as a standalone basis for trading.
Wskaźnik Pine Script®
od AGProLabs
2
AG Pro Liquidity Heatmap [AGPro Series]AG Pro Liquidity Heatmap Overview / What it does AG Pro Liquidity Heatmap is a visual liquidity-mapping tool designed to project areas where resting stop interest is more likely to be concentrated. Instead of focusing on a single pattern or a one-bar signal, this script builds a forward-looking heatmap from clustered pivot behavior and displays that information as persistent horizontal liquidity bands on the chart. The core idea is simple: repeated reactions around similar price levels often create zones where traders place stops, breakout orders, or defensive exits. When those levels begin to cluster, they can become structurally important. This script converts that clustering behavior into a heat score and renders it as layered Fire / Ice bands so traders can quickly identify where liquidity concentration may be building above or below current price. The script is not built as a prediction engine, and it does not attempt to claim where price must go next. Its purpose is to help traders organize the chart, monitor the nearest active liquidity bands, and understand which nearby levels appear more saturated, more persistent, or already mitigated. In that sense, it is best used as a market-structure context tool rather than as a standalone entry model. This script is also intentionally different from traditional support/resistance overlays, breakout detectors, and liquidity sweep labels. It does not merely mark recent highs and lows. It clusters pivot-derived levels, weights them into a dynamic heat score, extends them cleanly to the right side of the chart, and then updates or extinguishes them as price interacts with those zones. Unique Edge The unique edge of this script is that it treats liquidity as a developing field rather than a static line. A normal horizontal level script may show one prior high or one prior low. AG Pro Liquidity Heatmap instead tracks repeated pivot concentration, merges nearby levels into composite zones, scores those zones, and then visualizes the result as a layered heat structure. A second differentiator is the lifecycle logic. Once a band has been interacted with, the script does not leave every level unchanged forever. Depending on the selected behavior, a zone can fade or be removed after liquidity is taken. This helps reduce visual clutter and keeps the chart focused on currently relevant liquidity structures rather than a permanently accumulating archive of old levels. A third differentiator is presentation. The script is designed to produce a clean forward projection area with right-extending heat bands, readable labels, Fire / Ice theme control, a functional heatmap panel, and an optional EQ Magnet line that tracks the balance area between the nearest active upper and lower liquidity bands. The goal is not only analytical clarity, but also a chart layout that remains readable during live use. Methodology 1) Pivot detection The script first identifies pivot highs and pivot lows using user-defined left and right pivot lengths. These pivots are treated as candidate liquidity reference points. 2) Cluster merging If a new pivot forms close enough to an existing level, based on an ATR-driven merge distance, the script merges that information into the existing zone rather than creating unnecessary duplication. This allows nearby pivots to accumulate into a stronger composite band. 3) Heat scoring Each zone receives a heat score. Repeated clustering increases that score. When volume weighting is enabled, pivots formed with relatively stronger volume can contribute more heavily to the final score. This does not reveal actual order book liquidity, but it can provide a useful proxy for where market attention and stop concentration may be stronger. 4) Layered rendering Each active zone is rendered as a multi-layer horizontal band. The band thickness and saturation scale with heat score, which makes stronger zones visually heavier than weaker ones. This helps the chart communicate intensity without requiring the user to read every value manually. 5) Liquidity lifecycle When price reaches a zone, the script can either fade it or remove it depending on the selected extinguish mode. Optional mitigation tracking can leave a visual reminder of where liquidity was taken. This behavior is important because it keeps the heatmap adaptive rather than static. 6) Balance tracking When both upper and lower active liquidity bands are available, the script can display an EQ Magnet line between the nearest bands. This is not a target call. It is a contextual balance reference that can help visualize the midpoint of the currently nearest active liquidity field. States & Visual Elements - Fire bands represent upper liquidity concentration derived from pivot highs. - Ice bands represent lower liquidity concentration derived from pivot lows. - Stronger zones become visually denser and more prominent as heat score rises. - Zone labels display side, heat score, and price information in either compact or detailed mode. - The Heatmap Panel summarizes active band count, nearest zones, strongest zones, heat balance, last sweep information, and the current extinguish behavior. - The EQ Magnet line highlights the midpoint between the nearest active upper and lower bands when enabled. - Optional mitigation tracks can remain on the chart after liquidity is taken. How to use it This script is generally most useful as a context layer. Many traders may choose to use it in one of three ways: - to map where price may interact with nearby liquidity concentration, - to judge whether the closest active field is above or below current price, - to avoid taking impulsive decisions directly into dense opposing liquidity. The script can also be useful for chart organization. Traders who already use trend tools, structure tools, or trigger models may use the heatmap as a location filter. For example, a setup forming directly into a strong opposing liquidity band may deserve more caution than a setup developing in cleaner space. Key Inputs Pivot Left / Right Bars Controls how pivots are detected. Smaller values can produce more frequent zones; larger values can make the structure more selective. Cluster Merge Distance (ATR) Defines how close pivots must be to merge into the same liquidity band. Lower values keep zones more separated; higher values create broader clustering. Volume-Weighted Mode Allows higher-volume pivots to contribute more strongly to heat score. This is a proxy weighting mechanism, not direct order-flow confirmation. Minimum Heat Score To Show Filters out weaker zones from the visual display. Visual Saturation Score Controls how quickly the visual intensity reaches its maximum appearance. Base Band Height and Horizontal Band Density Shape the visual footprint of each zone and determine how rich or minimal the rendered band structure appears. Label controls Allow the user to choose label mode, font size, theme, label offsets, and label density. Panel controls Allow the user to change panel visibility, location, theme, and font size. Liquidity Taken Behavior Determines whether mitigated zones fade or are removed. Limitations & Transparency This script does not access order book data, exchange liquidation feeds, or hidden liquidity information. The displayed heatmap is derived from chart-based pivot clustering and optional volume weighting. For that reason, the bands should be understood as technical liquidity proxies rather than direct measurements of real resting orders. The heat score is also relative to the script's own internal logic. It is a ranking mechanism inside this model, not an absolute market-wide score. A higher score means a zone has accumulated more structural weight within the selected settings; it does not guarantee a reaction. Like any chart tool based on pivots, the behavior of the script depends on the chosen timeframe, the selected sensitivity inputs, and the structure of the instrument being analyzed. Lower timeframes can create more noise, while higher timeframes can produce fewer but broader zones. The EQ Magnet line is a contextual midpoint reference only. It should not be interpreted as a fixed target, a required destination, or a directional forecast. Risk Disclosure This script is a visual analysis tool for chart study and trade planning. It is not financial advice, not an execution system, and not a promise of future price behavior. Liquidity zones can fail, be overrun, or be ignored by price entirely. No indicator should be used in isolation. Traders should consider market structure, volatility, risk management, execution quality, and their own process before making trading decisions. Always test settings carefully and use position sizing appropriate to your own risk tolerance.
Wskaźnik Pine Script®
od AGProLabs
3
AG Pro PDH PDL PWH PWL Engine [AGPro Series]AG Pro PDH PDL PWH PWL Engine Overview / What it does AG Pro PDH PDL PWH PWL Engine is a price-reference overlay built to track prior day, prior week, and prior month high / low levels in a clean and structured way. The script can display PDH, PDL, PWH, PWL, and optionally PMH / PML, together with midpoint equilibrium levels for the selected ranges. The main purpose of the script is not to predict direction, generate guaranteed entries, or replace a complete trading plan. Its role is narrower and more practical: it helps traders keep important prior-period reference levels visible on the chart, distinguish which levels remain active, and identify which ones have already been traded through. In many markets, prior highs and lows are widely monitored as liquidity, reaction, and reference areas. This script organizes those areas into a format that is easier to read in live conditions. A core design goal of this tool is chart hygiene. Many prior-level indicators become visually noisy when several daily, weekly, and monthly references are drawn together. This script was designed to keep the structure readable by using a minimal label system, right-extended lines, a swept / unswept state model, and an optional dashboard that summarizes the nearest active daily, weekly, and monthly levels. The result is a workflow-oriented overlay that helps with context. Instead of forcing interpretation through aggressive signals, it presents a structured map of where important prior-period levels are located, whether they are still untouched, and whether current price is approaching one of them. That makes it suitable for traders who want an objective level engine rather than a directional prediction tool. Unique Edge The script focuses on presentation quality and state clarity rather than simple level plotting. Prior highs and lows are not rare concepts, but the practical usefulness of such levels depends heavily on how they are filtered, displayed, and maintained on the chart. This script aims to improve that usability in several ways. First, it separates active levels from swept levels. This matters because a previously untouched level and a level that has already been traded through do not carry the same contextual value for many traders. By visually differentiating unswept and swept references, the overlay can help reduce ambiguity when reviewing current structure. Second, it combines multi-period references in one coherent engine. Daily, weekly, and optional monthly levels can all be displayed together, while preserving a relatively clean visual hierarchy. This is particularly useful for traders who want to see whether current price is interacting with short-term references inside larger higher-timeframe ranges. Third, it includes proximity logic. The script can highlight levels when price is near them using a threshold defined in ticks, percentage, or ATR terms. This does not imply a trade signal by itself. Instead, it acts as a situational awareness feature that helps traders notice when price is entering a predefined level zone. Fourth, the script offers session and timezone controls. That allows the user to adapt the level-building logic to the exchange clock or to a chosen session definition. For traders who care about session-based construction and consistency across instruments, this can be an important operational detail. Finally, the panel is designed as a compact summary rather than a decorative feature. It reports the nearest active daily, weekly, and monthly references, shows counts for active and swept levels, and keeps session / timezone / label mode settings visible. The goal is to reduce chart scanning time and make the script easier to use during live analysis. Methodology The engine tracks highs and lows from completed prior periods and then projects those values forward as reference lines. Depending on the enabled settings, it can build: - Previous Day High and Previous Day Low - Previous Week High and Previous Week Low - Previous Month High and Previous Month Low - Optional equilibrium midpoints for each enabled range Each level is created only after the relevant source period is completed. In that sense, the level itself is based on completed historical range data. Once created, the line is monitored for its state. If price trades through a high reference or a low reference, the script marks that level as swept and changes its visual treatment accordingly. The script also maintains historical periods up to the number defined in the settings. This makes it possible to preserve a limited amount of recent structure without keeping an unlimited number of stale objects on the chart. The equilibrium option adds the midpoint of the corresponding prior range. Some traders use these 50% areas as balance references or as secondary context between the prior high and low. Because that midpoint is optional, the user can keep it visible when needed or disable it for a cleaner chart. The proximity engine measures how close current price is to an active level using one of three methods: - Tick distance - Percentage distance - ATR-based distance This feature is meant to flag nearness, not to define trade quality on its own. A prior level being near price does not automatically make the setup actionable. It only states that price is close to a tracked reference according to the selected threshold logic. States / Signals / Alerts This script is primarily a level-state and context tool. It is not a directional forecasting model. Its most important outputs are state-based: 1) Active level A level is considered active when it has been created from a completed prior period and has not yet been traded through by price. 2) Swept level A level is considered swept when price trades through that reference. Visually separating swept levels from active ones helps the chart communicate which prior references remain untouched. 3) Near-level condition When enabled, the script can highlight active levels that are close to current price according to the user-defined threshold method. This can help traders focus attention on nearby reference zones without scanning the entire chart manually. 4) Compact dashboard state The panel summarizes the nearest active daily, weekly, and monthly levels, along with active count, swept count, near count, selected timezone, session configuration, and label mode. The included alert conditions are intentionally simple and state-based: - Price is near one of the active levels - At least one tracked level was swept on the current bar These alerts are meant to support monitoring. They are not, by themselves, a complete trading trigger. Users should interpret them together with structure, volatility, session context, confirmation rules, and their own risk process. Why this script can be useful This script can be useful because prior highs and lows often matter most when they are easy to monitor and hard to misread. In practice, traders do not only need the raw numbers; they need a chart presentation that allows those numbers to remain readable during fast market conditions. A clean prior-level map can help in several common situations: - Evaluating whether price is approaching an untouched daily or weekly reference - Checking whether a local move is happening inside a larger higher-timeframe level framework - Distinguishing still-relevant references from already-tested ones - Monitoring potential reaction zones without crowding the chart with excessive objects - Organizing reference structure across intraday and swing workflows The script is also designed to remain practical over time. Instead of drawing everything with equal visual importance, it uses state logic and summary logic to keep the display more structured. That can make the tool easier to integrate into a routine where prior-period references are part of the trader's contextual process. Another useful aspect is that the script stays objective. It does not attempt to label every market move with a strong opinion. It shows completed prior-period levels, their current state, and whether price is approaching them. Many traders prefer this kind of neutral reference framework because it can be combined with other methodologies without forcing one interpretation. Key Inputs Timezone The script can use the exchange timezone or a selected timezone. This affects how period transitions are interpreted. Use Custom Session Filter When enabled, highs and lows are built only from bars inside the selected session. This allows the user to adapt the range construction to a chosen session framework. Session Defines the custom session window when session filtering is enabled. Show Previous Day / Week / Month Levels Each group can be enabled or disabled independently so the user can decide how much structure to display. Show Equilibrium Midpoints Adds the 50% midpoint of each enabled prior range. Historical Periods to Keep Controls how many past periods remain visible on the chart for each enabled level family. Proximity Threshold Type Lets the user define nearness by ticks, percentage, or ATR. Threshold Value / ATR Length Controls the sensitivity of the proximity logic. Highlight Levels When Near Allows visual emphasis when price approaches an active level. Line Style and Extension Settings Controls the appearance of unswept and swept lines and whether active lines extend to the right. Minimal Label Mode Allows labels to be turned off, restricted, or shown for active levels, depending on the user's preferred chart cleanliness. Panel Controls The dashboard can be enabled or disabled and its size, position, and colors can be adjusted. Example use cases This script can be used in different ways depending on the trader's workflow. Intraday context mapping: A trader may monitor PDH and PDL together with PWH and PWL to understand whether intraday price is moving into untouched daily liquidity while still operating inside a broader weekly range. Reaction-zone awareness: A trader may use near-level highlighting to notice when price is approaching an unswept prior high or prior low and then look for separate confirmation with their own method. Structure filtering: A trader may ignore swept references and focus mainly on active levels that remain intact, especially when trying to simplify the chart during live sessions. Session-based reference building: A trader who prefers a specific session logic can use the session filter so the constructed ranges better match their market framework. Dashboard monitoring: A trader may use the panel as a quick situational summary to identify which daily, weekly, or monthly reference is closest without manually reading every line. Limitations & Transparency This script does not know why price interacts with a level. It only identifies prior-period references and tracks whether they are active, near, or swept according to the rules defined in the code. A prior level is not automatically support or resistance in every market condition. Some reactions are meaningful, some are shallow, and some levels are passed through with little response. For that reason, the script should be treated as a structured reference map rather than a self-sufficient trade decision engine. The near-level logic depends on user-defined thresholds. Different threshold types and values can materially change how often levels are classified as near. Traders should calibrate these settings according to instrument volatility and their own workflow. Session and timezone choices also matter. The same market can produce different prior-period values depending on how the session is defined. Users should select settings that match the way they analyze the instrument. Historical object limits, chart timeframe, and chart compression can influence how dense the display appears. A setting that looks clean on one instrument or timeframe may feel crowded on another. The script provides controls to manage that, but users should still adapt it to their own use case. The midpoint equilibrium lines are optional because not every trader uses 50% references the same way. Their inclusion does not imply that the midpoint has universal predictive value. It is simply provided as an additional structural reference. This script is intentionally conservative in what it claims. It does not claim to detect institutional intent, hidden order flow, or guaranteed reversals. It displays prior completed reference levels and their current state on the chart. Risk Disclosure This script is for chart analysis and educational use. It does not provide financial advice, investment advice, or trade recommendations. Prior-period highs, lows, and midpoint references can be useful market context, but they are not guarantees of reaction, reversal, continuation, or liquidity behavior. Market conditions can change quickly, and price can move through any level without producing a tradable setup. Users should combine this tool with their own confirmation process, execution rules, position sizing framework, and risk management. No indicator should be used as the sole basis for entering or exiting a trade. Before using any chart tool in live markets, it is important to understand how its settings affect output, how it behaves on the instrument being traded, and how it fits into a broader decision process. AG Pro PDH PDL PWH PWL Engine is designed to help organize prior-period level information in a cleaner and more operational format. Its value comes from clarity, state tracking, and context support, not from predictive certainty.
Wskaźnik Pine Script®
od AGProLabs
2
AG Pro Auto Supply & Demand Zones [AGPro Series]AG Pro Auto Supply & Demand Zones Overview / What it does AG Pro Auto Supply & Demand Zones is an overlay that automatically detects supply and demand areas by combining compact base structures with directional displacement. The script is designed to help traders track where price left an area with enough urgency to justify keeping that zone on the chart for future reference, while also showing how that zone evolves over time. Instead of plotting every possible reaction area, the script applies a structured lifecycle model. A newly created zone begins as Fresh, can transition to Tested after a qualifying retest, and can later become Expired when it no longer meets the active criteria selected by the user. This state-based approach makes the chart easier to interpret because zones are not treated as static drawings. They are continuously re-evaluated as price interacts with them. The script also distinguishes between proximal and distal boundaries so users can see both the near edge and the full depth of each zone. A built-in active-zone limit helps keep the chart under control, and older zones gradually fade through time-based opacity reduction. This allows recent and decision-relevant areas to remain visually stronger while historical context becomes lighter. A light higher-timeframe overlay is included for users who want broader context without turning the chart into a dense multi-timeframe map. The goal is not to overwhelm the screen with background structure, but to add a subtle layer of alignment when higher-timeframe supply or demand remains relevant to the current price area. Unique Edge The distinctive feature of this script is that it does not stop at zone creation. It manages the full visual and logical lifecycle of a zone. Fresh, Tested, and Expired states are tracked in an explicit way, which makes the output more practical than a simple box-drawing tool. A second differentiator is the same-side merge logic. When a newly detected zone forms too close to an existing zone on the same side, the script can refresh or merge that area instead of stacking nearly identical layers on top of one another. This helps reduce redundancy and produces a cleaner, more readable structure map. Another important edge is the visibility architecture. Users can choose between All, Balanced Focus, and Smart Focus modes. This allows the chart to stay informative without becoming overloaded. Nearest active zones can be emphasized, distant context can be softened, and labels can be kept minimal, balanced, or fully expanded depending on the preferred workflow. Methodology The script uses a base-plus-displacement framework. 1. Base detection A candidate zone begins with a compact base cluster. The script evaluates the total base range relative to ATR and can also apply a clean-wick filter so that noisy or overly volatile bases are filtered out. 2. Displacement confirmation After the base, the script looks for directional expansion. The displacement candle must satisfy body-size conditions relative to ATR and must close with sufficient directional conviction. This is intended to avoid weak breaks that do not clearly separate from the base. 3. Zone construction For demand zones, the script builds the area using the base body high as the proximal reference and the base low as the distal boundary. For supply zones, it uses the base body low as the proximal reference and the base high as the distal boundary. This gives the user both the near decision line and the full zone range. 4. Lifecycle tracking A zone is initially Fresh. Once price revisits it under the selected confirmation mode, it can become Tested. If retests exceed the permitted limit, or if the user enables distal close-break invalidation, the zone can transition to Expired. 5. Zone maintenance The script can merge overlapping same-side zones, cap the total number of active zones, reduce opacity as zones age, and selectively hide distant context based on the selected visibility profile. 6. Light higher-timeframe context When enabled, the script projects a restrained higher-timeframe supply and demand layer onto the current chart. This is intended as context, not as a replacement for the active zones detected on the chart timeframe. Signals & Alerts This script includes alert support for key state events: - New Demand Zone - New Supply Zone - Fresh Demand Touched - Fresh Supply Touched - Demand Zone Expired - Supply Zone Expired These alerts are designed to follow the script's zone-state logic rather than subjective interpretation. Users can enable or disable zone-creation alerts, fresh-touch alerts, and expiration alerts independently. Key Inputs Detection Base Bars controls how many candles are used to form the base. Base Range ATR Factor defines how compact the base must remain relative to ATR. Max Single Base Candle ATR Factor limits oversized candles inside the base. Displacement Body ATR Factor controls the minimum strength required for displacement. Displacement Close Location checks whether the displacement candle closes with directional commitment. Use Clean Base Wick Filter helps reduce noisy base formations. Zone Management Merge Nearby Same-Side Zones helps avoid repeated stacking of almost identical zones. Minimum Same-Side Separation ATR defines how close a new zone can be to an existing same-side zone before merge logic becomes relevant. Minimum Zone Overlap Ratio requires stronger overlap before two nearby zones are treated as one structure. Lifecycle Max Active Zones limits how many active zones remain on the chart. Max Tests Before Expire controls how many qualified retests a zone can absorb before it expires. Test Confirmation offers Touch, Penetration, and Close Inside modes. Min Test Penetration Ratio refines how deep price must move into a zone when Penetration mode is selected. Expire On Distal Close Break can invalidate a zone when price closes beyond the distal boundary. Visuals Show Proximal Line and Show Distal Line let users control boundary visibility. Zone Visibility allows All, Balanced Focus, or Smart Focus workflows. Keep Nearest Active Zones Per Side helps preserve immediate context. Highlight Nearest Zones strengthens the most decision-relevant zones. Label Mode, Label Size, Label Right Offset Bars, and Label Spacing ATR control how zone labels are displayed. Light MTF View Enable Light MTF View activates higher-timeframe context. MTF Timeframe selects the higher timeframe. MTF Fill Transparency and MTF Context Bars help keep the overlay subtle. Panel The summary panel can be shown or hidden. Panel Theme, Panel Location, and Panel Font Size allow adaptation to different chart layouts and visual preferences. How to use it Many users will treat this script as a context and reaction map rather than as a standalone entry model. A common workflow is: - identify the nearest active demand and supply zones, - check whether the zone is Fresh or already Tested, - observe whether current price is approaching the proximal boundary or already trading deeper inside the zone, - use the light higher-timeframe layer for context, - then combine the zone information with personal confirmation tools such as structure, momentum, candle behavior, or risk rules. Fresh zones may be more interesting when they align with trend context or with a relevant higher-timeframe area. Tested zones can still matter, but their interpretation should usually be more selective because the zone has already been revisited. Limitations & Transparency This script detects supply and demand zones through a rules-based base and displacement model. It does not claim to identify every meaningful reaction area on a chart, and it does not attempt to label institutional intent, order flow, or smart-money behavior as a certainty. The quality of a zone depends on the selected settings, the volatility profile of the market, and the timeframe being analyzed. A more permissive configuration will naturally surface more zones, while a stricter configuration will produce a cleaner but narrower map. No single setting profile is optimal for every instrument. The higher-timeframe overlay is intentionally lightweight. It is designed to provide context, not to replace full top-down analysis. Likewise, a Fresh or Tested label should not be treated as a guarantee of reaction. It is simply the script's state classification based on the selected confirmation logic. This tool is best understood as a structured charting aid. It helps organize zone detection, lifecycle tracking, and visual prioritization. It does not remove the need for trade selection, confirmation, execution discipline, or risk management. Risk Disclosure This indicator is for chart analysis and educational use only. It does not provide financial advice, investment recommendations, or guaranteed outcomes. Markets can move through supply and demand zones without reacting, can partially react and fail, or can produce false confirmations. Always test settings carefully, evaluate the script in the context of your own process, and use proper risk management before making trading decisions.
Wskaźnik Pine Script®
od AGProLabs
24
AG Pro Reversal Pattern Quality Scanner [AGPro Series]AG Pro Reversal Pattern Quality Scanner Overview / What it does AG Pro Reversal Pattern Quality Scanner is an overlay tool designed to detect and visualize selected classical reversal structures directly on the chart while adding a structured quality layer to each valid setup. The script focuses on four widely recognized reversal formations: Double Top, Double Bottom, Head & Shoulders, and Inverse Head & Shoulders. Instead of marking every possible structural resemblance, the script applies a filtered detection workflow based on pivot structure, pattern width, peak or trough equality, pullback depth, neckline logic, and an internal quality model. The goal is not simply to identify a shape, but to highlight formations that display more balanced structure and more usable context. Each detected pattern can be displayed with a pattern box, a projected neckline, and a quality label that summarizes the pattern type, directional bias, quality score, and grade. This makes the script suitable for traders who want a structured visual map of potential reversal zones rather than a raw pattern-highlighting tool with no ranking logic. The indicator is built for chart reading and workflow support. It does not attempt to forecast future price movement with certainty, and it should not be interpreted as a standalone trade system. Its role is to help users organize reversal structures, compare them visually, and focus on higher-quality formations when reviewing price action. Unique Edge The main distinction of this script is that it does not treat all reversal patterns as equivalent. A detected pattern is further evaluated through a composite quality framework that considers structural symmetry, pullback depth, and volume behavior during formation and break conditions. For Double Top and Double Bottom structures, the script checks whether the two peaks or troughs remain sufficiently close to each other within a defined tolerance and whether the intermediate pullback is large enough to make the structure meaningful. For Head & Shoulders and Inverse Head & Shoulders structures, the script evaluates shoulder symmetry, time symmetry, and relative positioning of the head against the shoulders. The volume component is not used as a promise of confirmation. It is used as an additional contextual factor inside the quality score. In general terms, contracting volume during formation and stronger participation during the break candidate can improve the overall score when those conditions are present. Another important part of the design is visual prioritization. The script does not only draw the structure. It also attempts to keep the chart readable by organizing labels, neckline extensions, and pattern boxes in a way that preserves interpretation. The result is a cleaner reversal-pattern map that aims to be more practical than a simple shape detector. Methodology The script begins with swing pivot detection. These pivots act as the structural foundation for all pattern candidates. Once enough pivot highs and lows are available, the script evaluates whether recent pivot sequences fit the requirements of one of the supported reversal structures. For Double Top detection, the script checks whether two recent highs are similar enough, whether the interim low forms a valid neckline reference, whether the pattern width stays within defined limits, and whether price has broken below the neckline. For Double Bottom detection, the logic is mirrored on the bullish side through two similar lows, an interim high as the neckline reference, and a bullish break condition above that neckline. For Head & Shoulders detection, the script evaluates a sequence of three pivot highs where the middle high must exceed the two shoulders. It then estimates neckline structure from the lows between those highs and applies symmetry and pullback checks before accepting the setup. Inverse Head & Shoulders applies the same structural concept in reverse using pivot lows. After a valid break condition is detected, the script calculates a composite quality score. This score is based on user-controlled weights for volume behavior, symmetry, and pullback depth. The final output is normalized into a 1 to 10 quality scale, then translated into a grade label for easier scanning. Signals & Alerts The script can generate pattern-based alert conditions for: - Double Top - Double Bottom - Head & Shoulders - Inverse Head & Shoulders These alerts are tied to the script’s internal structural conditions and neckline break logic. As with any chart-based alert workflow, users should confirm that the selected settings match their market, timeframe, and execution style. Visual output can include: - Pattern boxes - Neckline lines - Neckline labels - Pattern quality labels - Break candle highlighting - Information panel with detection statistics The quality label is intended to summarize the detected structure, not to guarantee outcome quality. A higher score means the pattern aligned more closely with the script’s internal criteria. It does not mean the setup must succeed. Key Inputs The script includes adjustable inputs for both detection behavior and presentation. Key controls include: - Swing Pivot Length - Peak / Trough Equality tolerance - Minimum Pullback Between Peaks or Troughs - Minimum and Maximum Pattern Width - Minimum Quality to Display - Weighting of volume, symmetry, and pullback depth inside the quality score - Box, neckline, and pattern-label visibility - Global label size - Panel font size - Panel position - Neckline extension length - Pattern-specific alert toggles These controls make it possible to adapt the scanner to different chart densities, volatility profiles, and personal visual preferences. Limitations & Transparency This indicator is a rule-based pattern scanner. It is not a predictive engine, and it does not claim that all detected formations will lead to continuation or reversal. Classical chart structures can fail, invalidate, or behave differently depending on volatility, trend strength, liquidity conditions, timeframe, and broader market context. Pattern recognition on live charts is inherently sensitive to pivot settings and bar structure. Small changes in pivot length, equality tolerance, or minimum pullback can materially change how many formations appear. Because of that, users should treat the script as a configurable analytical framework rather than a universal template. The quality score is an internal ranking model built from the script’s own criteria. It is meant to help compare setups inside the same framework. It should not be interpreted as an objective probability model, a performance promise, or a substitute for independent trade management. Volume analysis also depends on the reliability and characteristics of the symbol’s reported data. On some instruments, volume may be less informative or behave differently than expected. Users should evaluate this in the context of their own market. Risk Disclosure This script is provided for chart analysis, workflow organization, and educational use. It does not provide financial advice, investment advice, or guaranteed trade signals. All trading and investment decisions remain the sole responsibility of the user. Reversal patterns can fail even when they appear clean and well-structured. Breaks can reverse, neckline moves can trap participants, and high-scoring formations can still underperform. Risk management, confirmation process, position sizing, and overall strategy design remain essential. Use this tool as a structured visual aid inside a broader decision-making process, not as a standalone reason to enter or exit a position.
Wskaźnik Pine Script®
od AGProLabs
4
AG Pro Pin Bar Quality Filter [AGPro Series]AG Pro Pin Bar Quality Filter Overview / What it does AG Pro Pin Bar Quality Filter is a price-action overlay built to detect pin bar candles and then separate higher-quality rejection candles from weaker or noisier ones. The script does not treat every long-wick candle as equally meaningful. Instead, it evaluates the internal candle structure first, then applies a compact quality framework around volume, recent momentum, and local support/resistance context. The result is a filtered pin bar workflow designed for traders who want cleaner chart annotation rather than a raw pattern dump. This tool focuses on one specific job: identifying rejection candles with a measurable structure and presenting them with a readable quality label directly on the chart. It is intended to help users inspect potential reaction points, not to replace broader market context or execution rules. The visual design is intentionally simple at the core: pin bar body highlighting, wick emphasis, directional markers, and compact quality labels. This makes the script suitable for traders who want candle-based context without converting the chart into a full market-structure dashboard. Unique Edge The distinctive feature of this script is that it does not stop at pattern detection. A standard pin bar script often marks candles only because they have a long wick. This script goes further by checking whether the wick is large enough relative to the body, whether the body itself is small enough relative to the full candle range, and whether one wick clearly dominates the other. That combination helps reduce ambiguous candles that visually resemble pin bars but do not express clean rejection. After the structural test, the script applies a three-part quality model: - volume confirmation - momentum context - support/resistance proximity This creates a practical quality hierarchy rather than a binary pattern label. In other words, the script is not only asking “Is this a pin bar?” but also “How much contextual support does this pin bar have?” An optional piercing check is also available for users who want stricter validation. This adds another layer of selectivity by requiring the candle body to show stronger positional behavior relative to the prior bar. Methodology The script starts by measuring the current candle: - candle body size - full candle range - upper wick length - lower wick length - dominant wick versus body ratio A raw pin bar candidate requires: - a minimum wick/body ratio - a maximum body percentage of full range - directional wick dominance This helps define whether the candle is a legitimate bullish or bearish rejection structure. Bullish pin logic is based on lower-wick dominance. Bearish pin logic is based on upper-wick dominance. Once a raw pin bar is detected, the script evaluates three contextual filters. 1) Volume filter The current volume can be compared against a moving average of volume. This helps identify candles that form with relatively stronger participation. 2) Momentum confirmation The script can check whether recent candles were moving in the opposite direction of the current pin bar. For example, a bullish pin bar becomes more meaningful when it forms after short-term downward pressure, while a bearish pin bar becomes more meaningful after short-term upward pressure. 3) Support / resistance proximity The script tracks pivot-based reference levels and checks whether the pin bar forms close to a recent local support or resistance area, using an ATR-based distance threshold. Each passed filter contributes to the final quality score. This produces a compact tiered output instead of a single undifferentiated signal stream. Signals & Alerts The script can identify: - bullish pin bars - bearish pin bars - higher-quality pin bars based on the selected minimum score Visual elements may include: - body highlighting on detected pin bars - wick emphasis - directional arrow markers - quality labels with contextual details - an information panel summarizing the active state The quality label can display the signal tier and relevant confirmations such as: - wick/body ratio - volume confirmation - momentum confirmation - support/resistance proximity Alert conditions are available for: - bullish pin bars - bearish pin bars - prime-quality pin bars - any valid pin bar that meets the selected score threshold This allows users to align alerts with their own strictness settings rather than monitoring every possible candle manually. Key Inputs Important user controls include: - minimum wick/body ratio - maximum body percentage of full range - wick dominance threshold - optional piercing requirement - volume filter enable/disable - momentum filter enable/disable - support/resistance filter enable/disable - minimum quality score - label size - panel display - maximum number of displayed signals These settings make the script adaptable across different instruments and chart styles. Users who prefer a broader scan can lower the strictness, while users who want fewer but cleaner signals can raise the thresholds. Limitations & Transparency This script is a rule-based candle-quality filter. It is not a market prediction engine, and it does not attempt to classify broader trend structure, liquidity behavior, or macro regime by itself. A pin bar can still fail even when all filters pass. A visually strong rejection candle is not automatically a durable reversal. Context such as higher-timeframe structure, trend state, volatility regime, session behavior, and instrument-specific character still matters. Support and resistance detection in this script is pivot-based and proximity-based. It is designed as a practical contextual filter, not as a complete structural mapping model. Volume behavior also varies by asset and market type. On some instruments, especially where centralized volume data is limited or interpreted differently, the volume filter should be treated as a supplementary input rather than a universal truth test. The momentum check is intentionally compact and local. It is meant to improve candle context, not to replace broader directional analysis. For these reasons, the script is best used as a chart-reading assistant within a larger process, not as a standalone decision framework. Risk Disclosure This script is provided for technical analysis and chart annotation purposes only. It highlights selected pin bar conditions based on user-defined structural and contextual rules. It does not provide financial advice, investment advice, or guaranteed trade outcomes. Markets can remain irrational, trend continuation can invalidate rejection candles, and false positives can occur in all timeframes and asset classes. Users should validate the script on their own instruments, timeframes, and risk models before relying on it in live conditions. Position sizing, stop placement, execution discipline, and overall trade management remain the responsibility of the user. In summary, AG Pro Pin Bar Quality Filter is designed to help traders study rejection candles with more structure, more selectivity, and cleaner on-chart presentation than a basic pin bar marker, while remaining transparent about what the script does and does not do.
Wskaźnik Pine Script®
od AGProLabs
2